Drones have a major drawback which prevents them from being used extensively - the excessive noise they produce. This article presents an optimization process of aerodynamic noise reduction for a novel design called the Toroidal Propeller, which consists of two blades looping joined in a manner where the end of one blade arches back into the other, has been designed by the Aerospace Propulsion Systems (APSs) research team at School of Mechanical Engineering, Hanoi University of Science and Technology. In addition, four toroidal propellers with different curved shapes (pitch) and Number of Blades (NOB) are considered. The goal of this research is to evaluate the effects of modifying the geometry design of the Toroidal Propeller on the intensity of blade tip vortex and aerodynamic flow characteristics passing through the blade. The ultimate goal is to decrease blade tip vortex and turbulence produced by the blade, which can help estimate the sound pressure level and minimize it without causing significant performance losses. Based on the outcome results, the models of the four geometry studies are compared in terms of Acoustic Power Level (APL), Surface Acoustic Power Level (SAPL), Thrust, Torque, and Power. In general, the propeller model with NOB of 3 provides the most optimal efficiency in terms of both Thrust and APL. At the output cross-section, the APL dropped from nearly 139 dB to 121 dB, while thrust increased from almost 6.2N to 8.7N compared to the first version of the Toroidal Propeller model.
27 August 2024 in International Journal of Heat and Fluid Flow
This study investigates rim seal flow in axial turbine configurations through a combined experimental–numerical approach, with the objective of identifying sealing-flow conditions that minimize ingestion while limiting aerodynamic losses. Experimental measurements from the University of BATH are used to validate computational methodology, ensuring consistency with established sealing-effectiveness trends. The work places particular emphasis on the influence of computational domain selection and interface treatment, which is shown to strongly affect the prediction of ingestion mechanisms. A key contribution of this study is the systematic assessment of multiple domain configurations, demonstrating that a frozen rotor MRF formulation provides the most reliable steady-state representation of pressure-driven ingress, whereas stationary and non-interface domains tend to overpredict sealing effectiveness. A simplified thin-seal model is also evaluated and found to offer an efficient alternative for global performance predictions. Furthermore, a statistical orifice-based model is introduced to estimate minimum sealing flow for different rim seal geometries, providing a practical engineering tool for purge-flow scaling. The effects of pre-swirl injection are examined and shown to substantially reduce rotor wall shear and moment coefficient, contributing to lower windage losses without significantly modifying sealing characteristics. Unsteady flow features are explored using a harmonic balance method, revealing Kelvin–Helmholtz-type instabilities that drive large-scale structures within the rim seal cavity, particularly near design-speed operation. Finally, results highlight a clear trade-off between sealing-flow rate and turbine isentropic efficiency, underlining the importance of optimized purge-flow management.
This study conducts experimental and modeling analyses to comprehend the unsteady flow phenomena within cavity gaps, with a specific focus on finding the optimal rim seal flow rate for enhancing turbine efficiency. The rim seal flow phenomenon is investigated and validated against the University of BATH's single-stage turbine experiment rig. The emphasis is on the steady-state computation of rim seal qualities using passive-scalar transport for tracer gas modeling, with limited exploration of unsteady phenomena. The LISA 1.5 stage model from Zurich University serves as a baseline for turbine efficiency studies, incorporating the rim seal configuration. The computational domain's influence, including the turbomachinery Multi-Reference Frame approach, is investigated. While the Frozen Rotor accurately predicts ingression flow fields, the no-interface model poorly predicts ingression, favoring a simplified "thin seal" model. A statistical approach is introduced for the "Orifice" model to implicitly calculate the minimum sealing flow for each rim seal configuration. Pre-swirling the rim seal demonstrates a reduction in shear forces on the rotor wall, consequently lowering friction torque on the rotor disc. However, swirling flow appears ineffective in influencing ingression and egression due to the model's long propagate distance. In addition to steady-state investigations, the harmonic balance method explores unsteady phenomena in Axial turbine configuration. Kelvin-Helmholtz instabilities within the rim seal gap are observed, acting as driving mechanisms for large-scale structures at 98% rotor speed. Incorporating wheel-space cavities in the LISA 1-stage model significantly alters flow phenomena and turbine efficiency. Rotor-stator interaction at specific times can complicate wheel space sealing, contrary to bladeless model predictions. Furthermore, an increase in rim seal flow is associated with reduced turbine isentropic efficiency.