Water is an essential part of life and its availability is important for all living creatures. On the other side, the world is suffering from a major problem of drinking water. There are several gases, microorganisms and other toxins (chemicals and heavy metals) added into water during rain, flowing water, etc. which is responsible for water pollution. This review article describes various applications of nanomaterial in removing different types of impurities from polluted water. There are various kinds of nanomaterials, which carried huge potential to treat polluted water (containing metal toxin substance, different organic and inorganic impurities) very effectively due to their unique properties like greater surface area, able to work at low concentration, etc. The nanostructured catalytic membranes, nanosorbents and nanophotocatalyst based approaches to remove pollutants from wastewater are eco-friendly and efficient, but they require more energy, more investment in order to purify the wastewater. There are many challenges and issues of wastewater treatment. Some precautions are also required to keep away from ecological and health issues. New modern equipment for wastewater treatment should be flexible, low cost and efficient for the commercialization purpose.

A wide variety of pollutants are discharged into water bodies like lakes, rivers, canal, etc. due to the growing world population, industrial development, depletion of water resources, improper disposal of agricultural and native wastes. Water pollution is becoming a severe problem for the whole world from small villages to big cities. The toxic metals and organic dyes pollutants are considered as significant contaminants that cause severe hazards to human beings and aquatic life. The microbial fuel cell (MFC) is the most promising, eco-friendly, and emerging technique. In this technique, microorganisms play an important role in bioremediation of water pollutants simultaneously generating an electric current. In this review, a new approach based on microbial fuel cells for bioremediation of organic dyes and toxic metals has been summarized. This technique offers an alternative with great potential in the field of wastewater treatment. Finally, their applications are discussed to explore the research gaps for future research direction. From a literature survey of more than 170 recent papers, it is evident that MFCs have demonstrated outstanding removal capabilities for various pollutants.

In this work, a polypyrrole-polyethyleneimine (PPy-PEI) nano-adsorbent was successfully synthesized for the removal of methylene blue (MB) from an aqueous solution. Synthetic dyes are among the most prevalent environmental contaminants. A new conducting polymer-based adsorbent called (PPy-PEI) was successfully produced using ammonium persulfate as an oxidant. The PEI hyper-branched polymer with terminal amino groups was added to the PPy adsorbent to provide more effective chelating sites for dyes. An efficient dye removal from an aqueous solution was demonstrated using a batch equilibrium technique that included a polyethyleneimine nano-adsorbent (PPy-PEI). The best adsorption parameters were measured at a 0.35 g dosage of adsorbent at a pH of 6.2 and a contact period of 40 min at room temperature. The produced PPy-PEI nano-adsorbent has an average particle size of 25–60 nm and a BET surface area of 17 m²/g. The results revealed that PPy-PEI nano-composite was synthesized, and adsorption was accomplished in the minimum amount of time. The maximum monolayer power, qmax, for MB was calculated using the isothermal adsorption data, which matched the Langmuir isotherm model, and the kinetic adsorption data, which more closely fitted the Langmuir pseudo-second-order kinetic model. The Langmuir model was used to calculate the maximum monolayer capacity, or qmax, for MB, which was found to be 183.3 mg g⁻¹. The as-prepared PPy-PEI nano-adsorbent totally removes the cationic dyes from the aqueous solution.

The present study has been carried out by irrigating turnip plants with different concentrations of treated municipal wastewater in order to see the effect on heavy metals accumulation and growth of plants. The turnip plants were watered with normal water and the results compared with results obtained by using treated municipal wastewater. The treatments used were: control (tap water) with 0, 25, 50 and 75% wastewater, and 100% wastewater, in three replications. The results indicated a substantial build-up of heavy metals in turnip irrigated with wastewater. The heavy metals content in the dry matter of the plants increased significantly with increase in wastewater concentration. Analysis of plant samples indicated the maximum accumulation of Fe (1,835 mg/kg in roots and 1,247 mg/kg in leaves) followed by Mn, Zn, Ni, Cu and Cd. The findings of this study regarding daily intake of metals suggest that the consumption of plants grown in wastewater is high, compared to consumption of those grown in tap water, but is nearly free of risks.

The effect of treated municipal wastewater on the roots and the leaves of turnip was studied to compare the 50% and 100% wastewater of 34 ml/d Sewage Treatment Plant (STP) with different doses of potassic fertilizers. Turnip (Brassica rapa) was used as a test plant. A pot experiment was conducted, using a factorial randomized block design to investigate the growth and translocation of heavy metals to the leaves and the roots of turnip. The concentration of heavy metal in wastewater used for irrigation was within the limits. However, the concentration in the plant parts showed a significant rise due to continuous use of wastewater. The concentration of heavy metals in leaves and roots was at excessive levels at 40 and 55 days after sowing (DAS), while at 70 DAS, metal concentration was comparatively low. The range of heavy metals in wastewater irrigated plants was Cd = 1–16.3, Ni = 0–136, Fe = 263–1197, Cu = 0–18, Mn = 37–125, and Zn = 42–141 mg/kg. Concentration of heavy metals in plants was found in the order of Fe>Zn>Ni>Mn>Cu>Cd.

A study was conducted to explore the possibility of using treated municipal wastewater to grow turnip (Brassica rapa). Two aspects namely (1) effect on plant growth and (2) accumulation of Cd, Cr, Ni, Fe Cu, Mn and Zn in leaves and roots of the plant have been presented in this paper. The heavy metal concentration of wastewater used for irrigation was within the limits however, the concentration in the plant parts showed a significant rise due to continuous use. The levels of all the heavy metals except Mn in the edible plant parts (leaves and roots) were estimated to be more than the toxic limits given by Pendias and Pendias The concentration of heavy metals was at excessive levels in 40 and 55 days after sowing (DAS), while at 70 DAS, metal concentration was low. Concentration of heavy metals in plants was found in the order of Fe > Zn > Ni > Mn > Cr > Cu > Cd.