Abdullahi Haruna Birniwa

Dr. Abdullahi Haruna Birniwa

Sule Lamido University, Kano, Nigeria
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
NYNura Shehu Aliyu Yaro
Nura Shehu Aliyu Yaro
MSMuslich Hartadi Sutanto
Muslich Hartadi Sutanto
LBLavania Baloo
Lavania Baloo
NHNoor Zainab Dubai Habib
Noor Zainab Dubai Habib
AUAliyu Usman
Aliyu Usman
ANAzmatullah Noor
Azmatullah Noor
Given the prevailing concerns about greenhouse gas emissions, global warming, and the growing demand for renewable resources, the pavement industry, among others, is actively engaged in researching and exploring low-carbon materials and technologies. Despite the growing interest in low-carbon asphalt pavement, there is still a significant knowledge gap regarding the use of various waste materials and technologies to achieve this goal. This study aims to close this gap by conducting a systematic review and scientometric assessment of the existing studies on the use of waste materials and technologies for low-carbon asphalt pavement. The study spans the years 2008 to 2023, and the scientometric analysis was conducted using the VOS viewer application. The study identifies materials and technologies in this area by examining co-authored country studies, publication sources, and keyword co-occurrence. It should be noted that a limited number of waste materials that allow CO2 emissions reduction was analyzed in this study. However, other waste categories, such as bio-oils and polymers, which can provide positive either environmental or economic impacts on the production of paving materials, were not considered in the scope of the study. Based on the current review, it was found that integrating recycled waste materials like recycled asphalt pavement, biochar, or crumb rubber with alternative mixing technologies such as warm mix asphalt and cleaner energy can significantly reduce CO2 emissions. China and the United States were identified as key research contributors to the low-carbon pavement. Furthermore, biomass-based fuel and electric construction equipment lower carbon and greenhouse gas emissions by 36–90% and 67–95%, respectively. However, before various recycled waste materials and technologies can be widely used in the asphalt industry, various challenges need to be addressed, including cost concerns, performance and durability concerns, standardization and regulations, availability, integration with existing facilities, and insufficient field and long-term data. The review identified critical research gaps, such as the absence of a homogeneous and reliable standard method for low-carbon asphalt pavement, limited field performance data, and a life cycle assessment approach in analyzing the emission reduction effects. The reviews will aid in the paradigm shift to a more carbon-friendly pavement industry that uses recycled waste materials and technologies.

Verified
Journal Article
Open access
PDF file
ABAbdullahi Haruna Birniwa
Abdullahi Haruna Birniwa
SAShehu Sa'ad Abdullahi
Shehu Sa'ad Abdullahi
MAMujahid Ali
Mujahid Ali
RMRania Edrees Adam Mohammad
Rania Edrees Adam Mohammad
AJAhmad Hussaini Jagaba
Ahmad Hussaini Jagaba
EFErick I Saavedra Flores
Erick I Saavedra Flores
Natural fiber (NF) is one of the many resources that nature has provided. NFs decompose quickly and are biodegradable, renewable, and cost-effective. It may be scavenged from a variety of plant and animal sources. They are employed as reinforcing materials in polymers for NF composite development. Because of its environmental friendliness and long-term survivability, NF is growing in appeal among academics and researchers for usage in polymer composites. This study aims to offer a thorough evaluation of the most suitable and widely utilized natural fiber-reinforced polymer composites (NFPCs), along with their manufacture, processing, and applications. It also defines several external treatments of NF and their influence on the characteristics of NFPCs. The characteristics of NFPCs are affected by fiber supply, fiber type, and fiber structure. Numerous physical and chemical treatments were tested to see how they affected the thermal and strength properties of natural fiber-reinforced thermoplastic and thermosetting composites. Several polymer composite fabrication techniques were also studied. NFPCs have several disadvantages, notably low fire protection, poor strength properties, and greater moisture absorption, which have prevented their application. It is shown how NFPCs are employed in a variety of industries, particularly automotive and research industries. The review discovered that intentionally changing the regular fiber enhanced the thermochemical and physico-mechanical properties of the NFPCs by means of improving the grip between the fiber surface and the polymer framework. This study aims to provide important and fundamental facts on NF and their composites, which will aid in new investigations, the creation of a creative framework for polymer composite types, and the achievement of Sustainable Development Goals.

17 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
ABAbdullahi Haruna Birniwa
Abdullahi Haruna Birniwa
HMH. N.M. Ekramul Mahmud
H. N.M. Ekramul Mahmud
SAShehu Sa'ad Abdullahi
Shehu Sa'ad Abdullahi
SHShehu Habibu
Shehu Habibu
AJAhmad Hussaini Jagaba
Ahmad Hussaini Jagaba
Khalid UmarKhalid Umar
Khalid Umar
In this work, a polypyrrole-polyethyleneimine (PPy-PEI) nano-adsorbent was successfully synthesized for the removal of methylene blue (MB) from an aqueous solution. Synthetic dyes are among the most prevalent environmental contaminants. A new conducting polymer-based adsorbent called (PPy-PEI) was successfully produced using ammonium persulfate as an oxidant. The PEI hyper-branched polymer with terminal amino groups was added to the PPy adsorbent to provide more effective chelating sites for dyes. An efficient dye removal from an aqueous solution was demonstrated using a batch equilibrium technique that included a polyethyleneimine nano-adsorbent (PPy-PEI). The best adsorption parameters were measured at a 0.35 g dosage of adsorbent at a pH of 6.2 and a contact period of 40 min at room temperature. The produced PPy-PEI nano-adsorbent has an average particle size of 25–60 nm and a BET surface area of 17 m2/g. The results revealed that PPy-PEI nano-composite was synthesized, and adsorption was accomplished in the minimum amount of time. The maximum monolayer power, qmax, for MB was calculated using the isothermal adsorption data, which matched the Langmuir isotherm model, and the kinetic adsorption data, which more closely fitted the Langmuir pseudo-second-order kinetic model. The Langmuir model was used to calculate the maximum monolayer capacity, or qmax, for MB, which was found to be 183.3 mg g−1. The as-prepared PPy-PEI nano-adsorbent totally removes the cationic dyes from the aqueous solution.

1 August 2021 in Journal of Water Process Engineering
Verified
Journal Article
Closed access
AJAhmad Hussaini Jagaba
Ahmad Hussaini Jagaba
SKShamsul Rahman Mohamed Kutty
Shamsul Rahman Mohamed Kutty
ANAzmatullah Noor
Azmatullah Noor
ABAbdullahi Haruna Birniwa
Abdullahi Haruna Birniwa
AAAugustine Chioma Affam
Augustine Chioma Affam
AKAbdullahi Usman Kilaco
Abdullahi Usman Kilaco

9 August 2021 in Materials
Verified
Journal Article
Open access
PDF file
AJAhmad Hussaini Jagaba
Ahmad Hussaini Jagaba
SKShamsul Rahman Mohamed Kutty
Shamsul Rahman Mohamed Kutty
Assoc. Prof. Dr. Gasim HayderAssoc. Prof. Dr. Gasim Hayder
Assoc. Prof. Dr. Gasim Hayder
LBLavania Baloo
Lavania Baloo
ANAzmatullah Noor
Azmatullah Noor
AKAbdullahi Usman Kilaco
Abdullahi Usman Kilaco
Several agro-waste materials have been utilized for sustainable engineering and environmental application over the past decades, showing different degrees of effectiveness. However, information concerning the wider use of palm oil clinker (POC) and its performance is still lacking. Therefore, as a solid waste byproduct produced in one of the oil palm processing stages, generating a huge quantity of waste mostly dumped into the landfill, the waste-to-resource potential of POC should be thoroughly discussed in a review. Thus, this paper provides a systematic review of the current research articles on the several advances made from 2005 to 2021 regarding palm oil clinker physical properties and performances, with a particular emphasis on their commitments to cost savings during environmental and engineering applications. The review begins by identifying the potential of POC application in conventional and geopolymer structural elements such as beams, slabs, and columns made of concrete, mortar, or paste for coarse aggregates, sand, and cement replacement. Aspects such as performance of POC in wastewater treatment processes, fine aggregate and cement replacement in asphaltic and bituminous mixtures during highway construction, a bio-filler in coatings for steel manufacturing processes, and a catalyst during energy generation are also discussed. This review further describes the effectiveness of POC in soil stabilization and the effect of POC pretreatment for performance enhancement. The present review can inspire researchers to find research gaps that will aid the sustainable use of agroindustry wastes. The fundamental knowledge contained in this review can also serve as a wake-up call for researchers that will motivate them to explore the high potential of utilizing POC for greater environmental benefits associated with less cost when compared with conventional materials.

21 October 2022 in Separations
Verified
Journal Article
Open access
PDF file
ABAbdullahi Haruna Birniwa
Abdullahi Haruna Birniwa
RMRania Edrees Adam Mohammad
Rania Edrees Adam Mohammad
MAMujahid Ali
Mujahid Ali
MRMuhammad Faisal Rehman
Muhammad Faisal Rehman
SAShehu Sa'ad Abdullahi
Shehu Sa'ad Abdullahi
AJAhmad Hussaini Jagaba
Ahmad Hussaini Jagaba
Given the increasing risks that antibiotic abuse poses to microecology and human health, it is imperative to develop incredibly powerful adsorbents. This study investigated the use of environmentally sustainable polymeric nanocomposite based on gum arabic (GA) and magnetic nanoparticles (MNPs) synthesized via co-precipitation method to form gum arabic magnetitic nanoparticles (GA-MNPs) as an efficient adsorbent for ciprofloxacin (CIP) removal from aqueous solution. The physicochemical properties and morphology of the synthesized GA-MNPs were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Energy Dispersive X-Ray Analysis (EDX). The experiment was designed by response surface methodology (RSM) and the Central Composite Design (CCD) was utilized to optimize the operating variables: contact time (0–120 min), pH (3–10), adsorbent dosage (0.10–0.40 g/L), and concentration of adsorbate (5–100 mg/L). Results showed that 96.30% was the maximum percentage of CIP removed. The adsorption effect of the CIP molecule on the surface of the GA-MNPs was investigated using regression analysis and analysis of variance. Furthermore, Freundlich Isotherm and Pseudo Second order kinetic equations have the highest consistency with experimental investigations suggesting double-layer adsorption. This implies that chemisorption was the mechanism involved. In addition, the calculated thermodynamic parameters were postulating an exothermic and spontaneous method in nature. Owing to its adsorption selectivity and recyclability, GA-MNPs could be classified as an environmentally friendly, less expensive, and highly efficient promising adsorbent for remediation of CIP from aqueous solution.