The need to increase the durability of unpaved roads and the need to improve driver comfort have led to this research: to focus more attention on the use of reinforcements for this type of road. Unpaved roads are created by using an unbound granular base layer placed on compacted cohesive soils. When the subgrade is weak, due to its poor consistency and high compressibility, generally, a geosynthetic reinforcement (geogrid and/or geotextile) is placed over the subgrade, followed by a compacted granular fill layer. The use of geosynthetics can produce several benefits, such as draining, reinforcement, filtering, separation, and proofing. This paper aims to present a numerical investigation using 3-D Finite Element Modeling (FEM) to analyze the improvement, in terms of the rutting reduction of an unpaved road system, reinforced by a geogrid, under repeated traffic loads. 3-D FEM analysis was carried out on two unpaved road sections, one reinforced and the other unreinforced, with both subjected to an impulsive wheel loading. It can be concluded that a significant improvement in pavement behavior is obtained by placing a geogrid layer at the base–subgrade interface. In fact, the obtained results show that geogrid reinforcement can provide a relevant contribution to the reduction of permanent deformations.
1 March 2013 in Archives of Civil and Mechanical Engineering
The present paper proposes a new methodology to characterize the landslide susceptibility of Reggio Calabria territory. The values obtained were classified into five categories and exported into GIS environment to produce a landslide susceptibility map. The principal objective of the proposed study is to identify the sections of the road network exposed to landslide hazards starting from the susceptibility map. To this aim, a fuzzy system was implemented for the assessment of the landslides susceptibility of the considered transport network.
A numerical model to predict train-induced vibrations is presented. The dynamic computation considers mutual interactions in vehicle/track coupled systems by means of a finite and discrete elements method. The rail defects and the case of out-of-round wheels are considered. The dynamic interaction between the wheel-sets and the rail is accomplished by using the non-linear Hertzian model with hysteresis damping. A sensitivity analysis is done to evaluate the variables affecting more the maintenance costs. The rail–sleeper contact is assumed extended to an area-defined contact zone, rather than a single-point assumption which fits better real case studies. Experimental validations show how prediction fits well experimental data.
The present paper proposes a new methodology to characterize the landslide susceptibility of the Reggio Calabria metropolitan area. For this purpose, various factors were used, such as land use, slope, rainfall, elevation, lithology, distance from roads and rivers, and thanks to the use of GIS devices and the AHP method, the landslide risk was defined for the whole territory. The values obtained were classified into four categories: low, moderate, high, and very high. They were then exported into the GIS environment to produce a landslide susceptibility map. The study carried out demonstrates the fragility of the Calabrian territory. From the results obtained, in fact, 66% of the metropolitan territory of Reggio Calabria appears to have a medium–high landslide risk.