Governments face numerous challenges in sustaining road network conditions. This is attributed to road authorities’ shortages of financial and physical infrastructure. As a result, low-cost automated solutions are being pursued to solve these problems and provide people with appropriate road conditions. Several attempts have been made to improve these technologies and incorporate them into a Pavement Management System (PMS) but limited attempts are made for developing countries. This study aimed to design a low-cost pavement management system for flexible pavement maintenance. A detailed literature review has been carried out, followed by a qualitative assessment of the various indicators considered for PMS. The priority ranks of the PMS indicators were made using an Analytical Network Process (ANP) and each rank was validated by a sensitivity assessment test using the Super Decision-Making tool. This paper also provides the conceptual framework for the low-cost PMS, followed by a fishbone diagram of the indicators and sub-indicators. It is concluded that an emergency maintenance plan with an ANP weight of (0.41) is one of the most significant plans for a low-cost PMS, followed by a routine with an ANP weight of (0.39) and periodic maintenance plans with a (0.20) ANP weight. Moreover, the functional indicators with an ANP weight of (0.32) are the most significant indicators for a low-cost PMS, followed by structural (0.26), safety (0.24), and serviceability(0.18) indicators. This model will assist the road planners in making better decisions on pavement maintenance management plans. The model will suggest the pavement sections on a higher priority to be added in the maintenance plans, especially where the maintenance budget is limited.
14 February 2018 in International Journal on Advanced Science, Engineering and Information Technology
Due to inadequate crude oil supply and a rising demand for petroleum asphalt in roadconstruction, the asphalt sector faces a continuing shortage. Continous research was conducted on renewable materials such as bio-oils derived via pyrolysis from local palm oil industries. Bio-oil is currently a viable option due to its renewability, environmental friendliness, and variety of sources. Despite numerous studies indicating that biooils enhance the properties of bitumen, the research on the effects of PKS biooil on bitumen properties is minimal and needed further investigations. The application of 2,4-diphenylmethane diisocyanate (MDI) in this study is established to enhance the properties of bio-oil modified bitumen. The objectives of this study are to analyse the relationship between the percentage andratio of PKS bio-oil and 2,4-diphenylmethane diisocyanate (MDI) of the modified bitumen, its physical and chemical effects and the optimization of bio-asphalt mixture after the 2,4diphenylmethane diisocyanate (MDI) has been blended with PKS bio-oil and bitumen. PKS bio-oil and MDI were applied into the bitumen as additive and replacement of bitumen at 3%, 5% and 7% with two different ratios; 1.0:0.6 and 1.0:1.0. The functional groups of the bitumen are identified using Fourier Transform Infrared (FTIR) analysis. The result generated from FTIR analysis showed that the modified bitumen samples were slightly different when compared to the conventional bitumen regarding the functional group. Response surface methodology (RSM)was implemented to determine the statistical analysis and optimum amount of PKS bio-oil and MDI content in the bitumen, through central composite design.
16 September 2021 in Environmental Science and Pollution Research
The usage of crumb rubber in road construction has been widely acknowledged and extensively implemented globally and even locally in Malaysia due to the substantial benefits and versatility of this material contribution in road works. Even though the used of crumb rubber material in road works has been reported since the 1950s, in Malaysia, the implementation of rubberised roads technology concept have been limited and emphasised only in Peninsular Malaysia. In contrast, there have been no recorded trials or construction inroads applying this technology in Sabah. Therefore, there is a necessity to investigate the awareness, advantages, barriers, strategies, and personal opinion regarding crumb rubber usage in the road's construction of Sabah. Questionnaire surveys and structured interviews from stakeholders of the construction industries within Sabah were conducted. The quantitative data collected was tested by descriptive statistics frequencies analysis respective to each section. Further assessment on Cronbach's Alpha test, mean value comparison, relative important index, chi-square test and regression analysis were performed to interested sections. Findings showed that the main advantages and barrier were environmentally friendly factor and financial barriers. Hence respondents propose that guidelines and construction standards as a guidance for the local road agency to be available.
24 April 2019 in IOP Conference Series: Materials Science and Engineering
Economic and environmental benefits gain from the recycling of old pavement promotes the use of reclaimed asphalt pavement (RAP) in the road construction and rehabilitation. However, high production temperature due to RAP stiffness becomes the main concern in the production of RAP. Reduced production temperature with the addition of warm mix asphalt (WMA) may compensate for aging of RAP binder, nevertheless the stiffness of RAP binder is depending on how much it ages and needs localised investigation for a bulk production of RAP. This research investigates the mix design and properties of high RAP content incorporating a WMA additive for a bulk RAP production in Malaysia. Milled RAP obtained from local roads were incorporated with a WMA named RH-WMA. Prior to addition of RAP into mixtures, the milled RAP were processed and characterized as a quality control of RAP from various sources. Mix design of mixture that contains RAP and 3% RH-WMA were performed using the Response Surface Method. Subsequently, the specimens were evaluated for its chemical and mechanical properties. The analysis on mix design showed that compaction temperature and bitumen content were significant factors. Reasonable reduction of optimum binder content and energy consumption were observed with the additions of RH-WMA. Tests on mechanical properties demonstrate increased on stiffness with the addition of RAP and hence reduced the fatigue resistance. However, the addition of RH-WMA on specimens that subjected to combined effects of moisture and aging showed improvement on fatigue resistance. Hence, with proper quality control of RAP material, the incorporation of RH-WMA into RAP indicated potential as an alternative material for green road construction.