Organizations focus on human resources to improve performance as a result of high global competition and a dynamic business environment. In today’s competitive environment, employee performance and job satisfaction are critical to the achievement of a company’s goals. Job satisfaction is an organization’s unnoticed success. Employee performance and job satisfaction are powerful tools that help in continuously developing and improving organizational performance to achieve strategic objectives. Job satisfaction is critical to the overall productivity of any given industry. Job satisfaction is important for both the employer and the employee. According to studies, employers greatly benefit from satisfied employees because they are more productive. One of the most important goals of a company is to maximize employee performance to achieve those goals. As a result, the focus of this study was on identifying the factors of job satisfaction and employee performance. It also evaluated the relationship between job satisfaction and employee performance in Pakistani construction projects. A detailed literature review was used to identify various factors, which were then shortlisted based on their relevance to the Pakistani construction industry by interviewing ten experienced practitioners. Totals of 11 job satisfaction and eight employee performance parameters were discovered. In total, 85 samples were collected as part of the data collection process via a questionnaire survey and statistically analyzed using multiple regression analysis. According to the results, all of the models have a high ability to compute the increase in employee performance criteria via the predicting variables. The overall models are significant because a value less than 0.05 indicates that they are. The study’s findings will assist practitioners in understanding the critical criteria that will increase employer satisfaction and improve performance.
The performance of bituminous materials is mainly affected by the prevailing maximum and minimum temperatures, and their mechanical properties can vary significantly with the magnitude of the temperature changes. The given effect can be observed from changes occurring in the bitumen or asphalt mixture stiffness and the materials’ serviceable life. Furthermore, when asphalt pavement layer are used, the temperature changes can be credited to climatic factors such as air temperature, solar radiation and wind. Thus in relevance to the discussed issue, the contents of this paper displays a comprehensive review of the collected existing 38 prediction models and broadly classifies them into their corresponding numerical, analytical and statistical models. These models further present different formulas based on the climate, environment, and methods of data collection and analyses. Corresponding to which, most models provide reasonable predictions for both minimum and maximum pavement temperatures. Some models can even predict the temperature of asphalt pavement layers on an hourly or daily basis using the provided statistical method. The analytical models can provide straight-forward solutions, but assumptions on boundary conditions should be simplified. Critical climatic and pavement factors influencing the accuracy of predicting temperature were examined. This paper recommends future studies involving coupled heat transfer model for the pavement and the environment, particularly consider to be made on the impact of surface water and temperature of pavements in urban areas.
The use of geopolymer in pavement constructions is strongly encouraged. Many studies have demonstrated the vast potential of using industrial-by-products-based geopolymers. This paper discusses the modification of asphalt binders with geopolymers, namely geopolymer-modified asphalt (GMA) and geopolymer-modified asphalt mixture (GMAM). In addition, curing geopolymer materials, engineering properties, production techniques, and prospective utilisation in the pavement construction, such as durability and sustainability, are also discussed. The literature review showed that many industrial by-products, including red mud, blast furnace slag, fly ash, and mine waste, are used to produce geopolymers because of the metal components such as silicon and aluminium in these materials. The geopolymers from these materials influence the rheological and physical properties of asphalt binders. Geopolymers can enhance asphalt mixture performance, such as stability, fatigue, rutting, and low-temperature cracking. The use of geopolymers in asphalt pavement has beneficial impacts on sustainability and economic and environmental benefits.
Polymer modification is extensively used in the Kingdom of Saudi Arabia (KSA) because the available asphalt cement does not satisfy the high-temperature requirements. It was widely used in KSA for more than two decades, and there is little information regarding the differences in the performance of different polymers approved for binder modification. Pavement engineers require performance comparisons among various polymers to select the best polymer for modification rather than make their selection based on satisfying binder specifications. Furthermore, the mechanical properties can help select polymer type, producing mixes of better resistance to specific pavement distresses. The study objective was to compare the mechanical properties of the various polymer-modified asphalt (PMA) mixtures that are widely used in the Riyadh region. Control mix and five other mixes with different polymers (Lucolast 7010, Anglomak 2144, Pavflex140, SBS KTR 401, and EE-2) were prepared. PMA mixtures were evaluated through different mechanical tests, including dynamic modulus, flow number, Hamburg wheel tracking, and indirect tensile strength. The results show an improvement in mechanical properties for all PMA mixtures relative to the control mixture. Based on the overall comparison, the asphalt mixture with polymer Anglomk2144 was ranked the best performing mixture, followed by Paveflex140 and EE-2.
Machine learning (ML) models are excellent alternative solutions to model complex engineering issues with high reliability and accuracy. This paper presents two extensively explored ensemble models for predicting asphalt pavement temperature, the Markov chain Monte Carlo (MCMC) and random forest (RF). The RF and multiple MCMC (RF-MCMC) were used to hybridise the proposed algorithms for the optimal prediction of asphalt pavement temperature. This study used thermal instruments to measure the asphalt pavement temperature in Gaza Strip, Palestine. The temperature measurements were made at a two-hour interval from March 2012 to February 2013. The temperature data was used to model the pavement temperature. More than 7200 measured pavement temperatures were used to train and validate the proposed models. The validation showed that the ML models are satisfactory. The modelling results ensured the value of the proposed hybridisation models in predicting the asphalt pavement temperature levels. The developed hybrid algorithms regression model achieved acceptable and better prediction results with a coefficient of determination (R2) of 0.96. Generally, the results confirmed the significance of the proposed hybrid model as a reliable alternative computer-aided model for predicting asphalt pavement temperature.
The reclaimed asphalt pavement (RAP) has become a moderately common practice in most countries; Hence, rejuvenating materials with RAP have earned publicity in the asphalt manufacturers, mainly due to the increasing raw material costs. In this study, the crumb rubber (CR) and waste frying oil (WFO) utilized as waste materials to restore the properties and enhance the rutting resistance of the RAP. Several physical, rheological, chemical properties of bituminous binders were tested. The result showed that the RAP bituminous binders incorporating WFO and CR decreased softening points and the increased penetration value; these translate to an increase in penetration index. Moreover, the viscosity of the WFO/CR combination reclaimed asphalt pavement binder showed better workability and stiffness, as well as a low storage stability temperature (less than 2.2 °C) with an acceptable loss upon heating. Without chemical reaction was observed between the waste-frying oil with the rubberized binder and the reclaimed asphalt pavement binder. Additionally, the WFO/CR rheological properties combined with the reclaimed asphalt pavement binder were comparable to the control sample. The incorporation of CR with WFO as a hybrid rejuvenator enhanced the rutting resistance. Therefore, the presence of WFO/CR has a considerable influence on the RAP binder properties while preserving a better environment and reducing pollution by reusing waste materials.