The conventional piezoelectric metamaterials with operational-amplifier-based shunt circuits have limited application due to the voltage restriction of the amplifiers. In this research, we report a novel piezoelectric metamaterial beam that takes advantage of mechanical shunt resonators. The proposed metamaterial beam consisted of a piezoelectric beam and remote mechanical piezoelectric resonators coupled with electrical wires. The local resonance of the remote mechanical shunt resonators modified the mechanical properties of the beam, yielding an elastic wave attenuation capability. A finite-length piezoelectric metamaterial beam and mechanical shunt resonators were considered for conceptual illustration. Significant elastic wave attenuation can be realized in the vicinity of the resonant frequency of the shunt resonators. The proposed system has the potential in the application of wave attenuation under large-amplitude excitations.
Taking the cantilever rotor of a turbine engine as the research object, a dynamic and finite-element model of the cantilever rotor is established, and the effectiveness of the model is verified by the rotor test platform. The transfer function method is used to balance the rotor system under unbalanced excitation, and the experiments prove that the method adopted in this paper has a good balancing effect and effectively reduces the vibration of the unbalanced rotor. On this basis, the experimental tests and simulation analyses of the rotor vibration response under different unbalanced phases and difference combinations are carried out, and the influence of the unbalanced phase’s difference combinations on unbalance and dynamic balance is analyzed. The results show that the vibration response of the system decreases with the increase in the unbalanced phase difference combinations, and the amplitude of the vibration induced by the unbalance of the reverse combination is smaller than that of the in-phase combination. The work in this paper can provide a theoretical basis for the dynamic balance and vibration control of the flexible rotor of an aero-engine.
8 June 2019 in Lecture Notes in Electrical Engineering