Ping Wang

Ping Wang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
HRHulin Ruan
Hulin Ruan
YWYi Wang
Yi Wang
XLXiaomeng Li
Xiaomeng Li
Yi QinYi Qin
Yi Qin
BTBaoping Tang
Baoping Tang
PWPing Wang
Ping Wang
The deep learning-based fault diagnosis approaches have achieved remarkable success in the field of rotating machinery condition monitoring. However, the basic intelligent fault diagnosis approaches require plenty of labeled samples to learn the strong feature representations in embedding feature space. Besides, it is time-consuming and laborious to collect sufficient labeled training samples in industrial occasions, which tremendously limits its performance in actual applications. To address the shortcoming, a relation-based semisupervised method is proposed in this article. In the proposed method, the sample relation discovering and pseudo label learning are integrated into an iterative framework, which is used to perform labeled sample augmentation in a progressive manner. Afterward, the supervised transfer training is introduced to reduce distribution discrepancy between the labeled and unlabeled samples, and eventually realize fault classification. Two gearbox fault diagnosis experiments are carried out to evaluate the effectiveness of the proposed method. The experimental results indicate that the proposed method obtains remarkable fault classification accuracy even only 5% of the labeled samples are available, which outperforms traditionally supervised and semisupervised fault diagnosis approaches.

24 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
JXJiawen Xu
Jiawen Xu
HLHang Lu
Hang Lu
WQWeiyang Qin
Weiyang Qin
PWPing Wang
Ping Wang
JBJie Bian
Jie Bian
The conventional piezoelectric metamaterials with operational-amplifier-based shunt circuits have limited application due to the voltage restriction of the amplifiers. In this research, we report a novel piezoelectric metamaterial beam that takes advantage of mechanical shunt resonators. The proposed metamaterial beam consisted of a piezoelectric beam and remote mechanical piezoelectric resonators coupled with electrical wires. The local resonance of the remote mechanical shunt resonators modified the mechanical properties of the beam, yielding an elastic wave attenuation capability. A finite-length piezoelectric metamaterial beam and mechanical shunt resonators were considered for conceptual illustration. Significant elastic wave attenuation can be realized in the vicinity of the resonant frequency of the shunt resonators. The proposed system has the potential in the application of wave attenuation under large-amplitude excitations.

21 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
ZZzhiyong Zhou
zhiyong Zhou
HZhw zhang
hw zhang
WQWeiyang Qin
Weiyang Qin
PZPei Zhu
Pei Zhu
PWPing Wang
Ping Wang
WDWenfeng Du
Wenfeng Du
Bridges play an increasingly more important role in modern transportation, which is why many sensors are mounted on it in order to provide safety. However, supplying reliable power to these sensors has always been a great challenge. Scavenging energy from bridge vibration to power the wireless sensors has attracted more attention in recent years. Moreover, it has been proved that the linear energy harvester cannot always work efficiently since the vibration energy of the bridge distributes over a broad frequency band. In this paper, a nonlinear energy harvester is proposed to enhance the performance of harvesting bridge vibration energy. Analyses on potential energy, restoring force, and stiffness were carried out. By adjusting the separation distance between magnets, the harvester could own a low and flat potential energy, which could help the harvester oscillate on a high-energy orbit and generate high output. For validation, corresponding experiments were carried out. The results show that the output of the optimal configuration outperforms that of the linear one. Moreover, with the increase in vehicle speed, a component of extremely low frequency is gradually enhanced, which corresponds to the motion on the high-energy orbit. This study may give an effective method of harvesting energy from bridge vibration excited by moving vehicles with different moving speeds.

15 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PWPing Wang
Ping Wang
YJYongzhi Jiang
Yongzhi Jiang
PLPeng Li
Peng Li
JZJinlian Zhou
Jinlian Zhou
ZZZe Zhou
Ze Zhou
Drilling to relieve pressure is a simple and efficient solution to prevent impact ground pressure for the engineering problem of the high risk of impact on the surrounding rock of high stress roads, and choosing suitable drilling parameters is the key to it. The unloading law of borehole diameter, depth, and spacing was investigated using a combination of indoor tests, numerical simulations, and theoretical analysis. The characteristics of crack extension and plastic zone changes of the three were analyzed, and the relationship between boreholes and elastic strain energy was derived by developing a hole mechanics model. The findings indicate that as drilling radius and depth are increased, peak strength and the elastic strain energy stored in front of the peak decrease, the plastic zone around the hole and the main control crack on the surface of the block expand more obviously, and the vertical stress at the top and bottom of the hole decrease, and the peak stress increases with the depth of the hole. The plastic zone surrounding the hole is attached to one another more easily the closer the drilling spacing is. The test block is changed from independent damage to penetrating damage when the drilling spacing is less than or equal to 3.286 cm. However, the pressure release effect does not necessarily improve with narrower drilling spacing. The plastic zone radius and the elastic strain energy held in the rock body are linked to each other linearly and quadratically, respectively, by the drilling radius. The joint pressure relief of several holes should be prioritized when drilling pressure is relieved, and then the hole’s diameter should be increased, and, finally, the hole’s depth should be increased. A reference for engineering applications is provided by this.

19 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YZYongjian Zhu
Yongjian Zhu
PWPing Wang
Ping Wang
PWPing Wang
Ping Wang
CMChengcheng Mei
Chengcheng Mei
HRHeng Ren
Heng Ren
XWXizhi WANG
Xizhi WANG
The mining of deep coal resources occurs in a high-stress geological environment as well as an engineering environment of rock excavation and unloading. Research on the re-bearing capacity characteristics and damage mechanism of rock masses damaged by peak front unloading is critical in revealing the destabilization and rupture law of deep rock bodies. The triaxial pre-peak unloading point was controlled to prepare damaged sandstone specimens, and the RMT-150C rock mechanics test loading system and the AEwin USB-type acoustic emission monitor were used to perform uniaxial reloading tests on the pre-peak unloading-damaged sandstone and to monitor the acoustic emission signals during the rupture process. Among them, the peak front unloading point was set to 40%, 45%, 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, and 90% of the peak strength at 10 MPa of the surrounding pressure for a total of 11 working conditions. The test results show that: (1) The degree of unloading before the peak controls the uniaxial reload deformation characteristics of sandstone. The higher the unloading point, the faster the deformation of the rock sample, even directly into the crack instability extension stage, and the sandstone deformation characteristics transform from plastic—elastic to elastic—viscous. (2) The cumulative energy characteristics of the 40% to 60% sandstone at the unloading point are comparable to those of the complete sandstone and are separated into smooth, steady growth, and secondary smooth phases. The acoustic emission energy characteristics of the 65% and 70% sandstone at the unloading point are mostly focused on during the crack expansion stage. The sandstone’s acoustic emission energy characteristics exhibit a “double peak” occurrence at 75% of the unloading point. The cumulative energy characteristics of the 80% to 90% sandstone at the unloading point reveal a “stepped” rise. (3) Sandstone’s pre-peak unloading rupture morphology influences the reload damage characteristics: 40% to 70% of the specimens at the unloading point exhibit “Y”-type double-slope shear damage features. The predominant cause of specimen damage in 75% of the specimens at the unloading point is secondary primary cracks based on the pre-peak tensile rupture pattern. The damage path of 80% to 90% of the specimens at the point of unloading occurs in shear damage along the pre-peak unloading rupture pattern. (4) A closed crack mechanics analysis model under uniaxial reload was established, and the basic solution of pseudo-force for fine microcracks subjected to far-field stress, the stress intensity factor at the crack tip, and the crack fracture angle were theoretically derived. Furthermore, the relationship between the fracture angle θ of rock compression-shear cracks, the crack angle β, and the friction coefficient f at the crack surface was clarified.

1 January 2020 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
PWPing Wang
Ping Wang
YMYuanjun Ma
Yuanjun Ma
YZYongjian Zhu
Yongjian Zhu
JZJun Zhu
Jun Zhu
The delay‐time of detonators in hole‐by‐hole blasting is generally calculated accurately considering they have great influence on the blasting effect, such as blasting vibration and blasting slungshot. The high‐precision nonel detonator and digital electronic detonator are been commonly used because of their accuracy of delay‐time. However, each detonator has an allowable error range of delay‐time due to the difference in manufacturing process. In the initiation network, the errors of delay‐time often accumulate gradually as the number of detonators increases. Therefore, theoretical delay‐time and actual delay‐time with error in the detonating network were discussed based on the delay‐time errors of detonators. The single‐factor variable method was used to carry out the comparative test in deep hole blasting. The results showed that the particle peak vibration velocity (PPV) was 13.1783 cm/s and 3.4856 cm/s with a drop of 73.55% in comparison with a nonel detonator and digital electronic detonator, which proved that hole‐by‐hole blasting in the high‐precision nonel detonator network was not achieved due to the delay error of detonators. Furthermore, the location distribution map of holes where the same section of detonators might occur was obtained. Finally, the probability of blasting in the same section changes with the number of blast holes was discovered by theoretical analysis, which provided a basis for accurate hole‐by‐hole blasting.