Maksim Aleksandrovich Chumak

Mr. Maksim Aleksandrovich Chumak

Peter the Great St. Petersburg Polytechnic University, Saint Petersburg, Sankt-Peterburg, Russia
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ASAlexandr Shchegolkov
Alexandr Shchegolkov
ASAleksei Viktorovich Shchegolkov
Aleksei Viktorovich Shchegolkov
VKVladimir Kaminskii
Vladimir Kaminskii
PIPablo Iturralde
Pablo Iturralde
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
The paper presents a review of CNTs synthesis methods and their application as a functional filler to obtain polymer composites for various technical purposes for strain gauges, electrical heating, anti-static coatings, electrically conductive compounds, etc. Various synthesis methods allow CNTs with different morphology and structural properties to be created, which expands the possibilities of the application of such nanoscale structures. Polymers can provide such effects as ‘shape memory’ and self-repair of mechanical defects. Different combinations of polymers and dispersed fillers influence the change in electrical and thermal conductivity, as well as the positive temperature coefficient of resistance, which makes it possible to achieve the effect of temperature self-regulation during electrical heating. CNTs make it possible to form PTCR (positive temperature coefficient of resistance) in elastomers at lower concentrations, which makes it possible to preserve mechanical strength and use more efficient modes of heat generation. For strain gauges, CNTs improve sensitivity to mechanical effects and extend the measurement range. The use of thermoplastic elastomers provides the temperature of PTCR operation for electric heating at the level of 200 °C (voltage 240 V), which allows such heaters to operate at a power supply from a household electrical network. CNTs-based strain gauges can provide structural condition monitoring of composite materials.

2 January 2025 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
ASAleksei Viktorovich Shchegolkov
Aleksei Viktorovich Shchegolkov
ASAlexandr Shchegolkov
Alexandr Shchegolkov
VKVladimir Kaminskii
Vladimir Kaminskii
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
Strain gauges and strain gauge transducers are important tools in the field of material resistance research to measure the stresses and strains in solids. These methods and devices have a wide range of applications, from construction to mechanical engineering, where the mechanical properties of materials need to be monitored and optimized. The use of nanomaterials in strain gauges allows for more sensitive and compact sensors. Nanotechnology makes it possible to create strain gauges with improved mechanical and electrical properties. At the same time, nanomaterials have unique properties that make them ideal for use in strain gauges. This paper considers different types of composites based on polymer matrices with additives of dispersed nanomaterials, which are designed for strain gauge tasks. Thermoplastics and elastomers can be used as polymer matrices. Dispersed fillers can be based on MXene and nanomaterials such as carbon nanotubes, graphene, metals, etc. Despite the obvious advantages of strain gauges based on conducting polymers modified with dispersed structures, there are problems in creating effective strain gauges with the ability to operate under large deformations with an improved sensitivity and accuracy of measurements in a wide range. This article also provides brief information on the technical evolution of strain gauges, from wire and foil to polymer nanocomposites. A modern classification of strain gauges is provided. The disadvantages and advantages of existing strain gauges are shown. The review contains information on commercial strain gauges. The mechanisms of electrical conductivity formation in polymer composites for strain gauges are described in detail. The areas of application of polymer nanocomposite strain gauges are also specified in detail. The purpose of this review study is to determine the prospects for the use of various nanomaterials as additives in polymers to create strain gauges. The review is aimed at a wide range of readers.

26 April 2024 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
ASAlexandr Shchegolkov
Alexandr Shchegolkov
EPEugeni O. Popov
Eugeni O. Popov
SFSergei Vladimirovich Filippov
Sergei Vladimirovich Filippov
AKAnatoly G. Kolosko
Anatoly G. Kolosko
Arif BabaevArif Babaev
Arif Babaev
This article presents, for the first time, a comparative analysis of the emission characteristics of large-area field-effect cathodes (LAFE) based on carbon nanotubes (CNTs) of various morphologies according to key parameters using a unique computerized technique. The work presents a description of a technology for creating various CNT arrays and their comprehensive structure characterization. All CNT arrays synthesized by the catalytic PECVD method on a silicon substrate showed a high degree of chemical purity under the presented technological conditions. In some cases, nanoisland films of Fe were used as a catalyst; in others, thin films of NiO were used, which were deposited on a silicon wafer by chemical vapor deposition (CVD) and atomic layer deposition (ALD), respectively. As a result of these studies, it turned out that an array with a thick CNT coating has good resistance to the action of strong electric fields, fairly good uniformity of distribution of emission centers, a fairly high selection current (2.88 mA/cm2 at 4.53 V/μm), and compliance with the normal current mode according to the “orthodox” test, which makes the morphology of such structures the most promising for further technological optimization of CNT-based cathodes for various practical applications.

12 December 2024 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
ASAlexandr Shchegolkov
Alexandr Shchegolkov
ASAleksei Viktorovich Shchegolkov
Aleksei Viktorovich Shchegolkov
VKVladimir Kaminskii
Vladimir Kaminskii
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
The paper presents an overview of conductive polymer composites based on thermosetting materials, thermoplastics, and elastomers modified with carbon nanotubes (CNTs). To impart conductive properties to polymers, metal, carbon-dispersed materials, or their combinations are used. The inclusion of dispersed materials in polymers is associated with their microstructural features, as well as with polymerization methods. Such polymerization methods as melt mixing, solution technology, and introduction of fillers into the liquid phase of the composite with subsequent polymerization due to the use of a catalyst are known. Polymer composites that are capable of conducting electric current and changing their properties under the influence of an electric field, i.e., having one or more functional purposes, are called “smart” or intelligent. One such application is electric heating elements with the function of adaptive energy consumption or the effect of self-regulation of temperature depending on the surrounding conditions. A wide variety of polymers and dispersed materials with conductive properties determines a wide range of functional capabilities of the composite, including a positive temperature coefficient of resistance (PTCR) required to control temperature properties. The most effective filler in a polymer for obtaining a composite with desired properties is carbon nanomaterials, in particular, CNT. This is due to the fact that CNTs are a nanosized material with a high bulk density at a low weight, which allows for high electrical conductivity. Calculation of model parameters of polymer composites containing carbon nanostructures can be carried out using neural networks and machine learning, which give a fundamentally new result. The article contains sections with an assessment of various types of polymer matrices based on thermosets, thermoplastics, and elastomers. To impart electrically conductive properties, various options for fillers based on Ag, Au, Cu, Ni, Fe, and CNTs are considered. Methods for introducing dispersed fillers into polymer matrices are presented. Functional composites with a positive temperature coefficient and methods for their regulation are considered. The mechanisms of various electrophysical processes in conductive composites are considered, taking into account the resulting electrical conductivity based on the tunnel effect and hopping conductivity. An analysis of electric heaters based on various polymer matrices and dispersed fillers is carried out, taking into account their operating modes. Thus, the conducted review of modern scientific and practical research in the field of obtaining electrically conductive composites based on various types of polymer matrices with nanosized additives allows us to assess the prospects for the formation of functional composites for electrical heating, taking into account the mechanisms of electrical conductivity and new technologies based on machine learning and neural networks.

14 October 2019 in Technical Physics
Verified
Journal Article
Closed access
PDF file
EPE. O. Popov
E. O. Popov
AKA. G. Kolosko
A. G. Kolosko
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
SFS. V. Filippov
S. V. Filippov
The emission area is one of the main parameters of field emission systems. A variety of formal determination techniques for the emission area is studied. Using the model...

10 December 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
IBIvan Bizyaev
Ivan Bizyaev
PGPavel Gabdullin
Pavel Gabdullin
MCMaksim Aleksandrovich Chumak
Maksim Aleksandrovich Chumak
VBVladislav Babyuk
Vladislav Babyuk
SDSergey Davydov
Sergey Davydov
AAAlexander Arkhipov
Alexander Arkhipov
Herein, we describe a study of the phenomenon of field-induced electron emission from thin films deposited on flat Si substrates. Films of Mo with an effective thickness of 6–10 nm showed room-temperature low-field emissivity; a 100 nA current was extracted at macroscopic field magnitudes as low as 1.4–3.7 V/μm. This result was achieved after formation treatment of the samples by combined action of elevated temperatures (100–600 °C) and the electric field. Morphology of the films was assessed by AFM, SEM, and STM/STS methods before and after the emission tests. The images showed that forming treatment and emission experiments resulted in the appearance of numerous defects at the initially continuous and smooth films; in some regions, the Mo layer was found to consist of separate nanosized islets. Film structure reconstruction (dewetting) was apparently induced by emission-related factors, such as local heating and/or ion irradiation. These results were compared with our previous data obtained in experiments with carbon islet films of similar average thickness deposited onto identical substrates. On this basis, we suggest a novel model of emission mechanism that might be common for thin films of carbon and refractory metals. The model combines elements of the well-known patch field, multiple barriers, and thermoelectric models of low-macroscopic-field electron emission from electrically nanostructured heterogeneous materials.