Exactly 50 years ago, the first article on electrochromism was published. Today electrochromic materials are highly popular in various devices. Interest in nanostructured electrochromic and nanocomposite organic/inorganic nanostructured electrochromic materials has increased in the last decade. These materials can enhance the electrochemical and electrochromic properties of devices related to them. This article describes electrochromic materials, proposes their classification and systematization for organic inorganic and nanostructured electrochromic materials, identifies their advantages and shortcomings, analyzes current tendencies in the development of nanomaterials used in electrochromic coatings (films) and their practical use in various optical devices for protection from light radiation, in particular, their use as light filters and light modulators for optoelectronic devices, as well as methods for their preparation. The modern technologies of “Smart Windows”, which are based on chromogenic materials and liquid crystals, are analyzed, and their advantages and disadvantages are also given. Various types of chromogenic materials are presented, examples of which include photochromic, thermochromic and gasochromic materials, as well as the main physical effects affecting changes in their optical properties. Additionally, this study describes electrochromic technologies based on WO₃ films prepared by different methods, such as electrochemical deposition, magnetron sputtering, spray pyrolysis, sol–gel, etc. An example of an electrochromic “Smart Window” based on WO₃ is shown in the article. A modern analysis of electrochromic devices based on nanostructured materials used in various applications is presented. The paper discusses the causes of internal and external size effects in the process of modifying WO₃ electrochromic films using nanomaterials, in particular, GO/rGO nanomaterials.

The paper presents a review of CNTs synthesis methods and their application as a functional filler to obtain polymer composites for various technical purposes for strain gauges, electrical heating, anti-static coatings, electrically conductive compounds, etc. Various synthesis methods allow CNTs with different morphology and structural properties to be created, which expands the possibilities of the application of such nanoscale structures. Polymers can provide such effects as ‘shape memory’ and self-repair of mechanical defects. Different combinations of polymers and dispersed fillers influence the change in electrical and thermal conductivity, as well as the positive temperature coefficient of resistance, which makes it possible to achieve the effect of temperature self-regulation during electrical heating. CNTs make it possible to form PTCR (positive temperature coefficient of resistance) in elastomers at lower concentrations, which makes it possible to preserve mechanical strength and use more efficient modes of heat generation. For strain gauges, CNTs improve sensitivity to mechanical effects and extend the measurement range. The use of thermoplastic elastomers provides the temperature of PTCR operation for electric heating at the level of 200 °C (voltage 240 V), which allows such heaters to operate at a power supply from a household electrical network. CNTs-based strain gauges can provide structural condition monitoring of composite materials.

The turn to hydrogen as an energy source is a fundamentally important task facing the global energetics, aviation and automotive industries. This step would reduce the negative man-made impact on the environment on the one hand, and provide previously inaccessible power modes and increased resources for technical systems, predetermining the development of an absolutely new life cycle for important areas of technology, on the other. The most important aspect in this case is the development of next-generation technologies for hydrogen industry waste management that will definitely reduce the negative impact of technology on the environment. We consider the approaches and methods related to new technologies in the area of hydrogen storage (HS), which requires the use of specialized equipment equipped with efficient and controlled temperature control systems, as well as the involvement of innovative materials that allow HS in solid form. Technologies for controlling hydrogen production and storage systems are of great importance, and can be implemented using neural networks, making it possible to significantly improve all technological stages according to the criteria of energy efficiency reliability, safety, and eco-friendliness. The recent advantages in these directions are also reviewed.

Strain gauges and strain gauge transducers are important tools in the field of material resistance research to measure the stresses and strains in solids. These methods and devices have a wide range of applications, from construction to mechanical engineering, where the mechanical properties of materials need to be monitored and optimized. The use of nanomaterials in strain gauges allows for more sensitive and compact sensors. Nanotechnology makes it possible to create strain gauges with improved mechanical and electrical properties. At the same time, nanomaterials have unique properties that make them ideal for use in strain gauges. This paper considers different types of composites based on polymer matrices with additives of dispersed nanomaterials, which are designed for strain gauge tasks. Thermoplastics and elastomers can be used as polymer matrices. Dispersed fillers can be based on MXene and nanomaterials such as carbon nanotubes, graphene, metals, etc. Despite the obvious advantages of strain gauges based on conducting polymers modified with dispersed structures, there are problems in creating effective strain gauges with the ability to operate under large deformations with an improved sensitivity and accuracy of measurements in a wide range. This article also provides brief information on the technical evolution of strain gauges, from wire and foil to polymer nanocomposites. A modern classification of strain gauges is provided. The disadvantages and advantages of existing strain gauges are shown. The review contains information on commercial strain gauges. The mechanisms of electrical conductivity formation in polymer composites for strain gauges are described in detail. The areas of application of polymer nanocomposite strain gauges are also specified in detail. The purpose of this review study is to determine the prospects for the use of various nanomaterials as additives in polymers to create strain gauges. The review is aimed at a wide range of readers.

This review provides a comprehensive analysis of modern strategies for the synthesis, functionalization, and application of carbon nanotubes (CNTs) and graphene for the development of high-performance polymer composites in the field of strain sensing. The paper systematically organizes key synthesis methods for CNTs and graphene (chemical vapor deposition (CVD), such as arc discharge, laser ablation, microwave synthesis, and flame synthesis, as well as approaches to their chemical and physical modification aimed at enhancing dispersion within polymer matrices and strengthening interfacial adhesion. A detailed examination is presented on the structural features of the nanofillers, such as the CNT aspect ratio, graphene oxide modification, and the formation of hybrid 3D networks and processing techniques, which enable the targeted control of the nanocomposite’s electrical conductivity, mechanical strength, and flexibility. Central focus is placed on the fundamental mechanisms of the piezoresistive response, analyzing the role of percolation thresholds, quantum tunneling effects, and the reconfiguration of conductive networks under mechanical load. The review summarizes the latest advancements in flexible and stretchable sensors capable of detecting both micro- and macro-strains for structural health monitoring, highlighting the achieved improvements in sensitivity, operational range, and durability of the composites. Ultimately, this analysis clarifies the interrelationship between nanofiller structure (CNTs and graphene), processing conditions, and sensor functionality, highlighting key avenues for future innovation in smart materials and wearable devices.

The article deals with research related to the issues of nanomodification of elastomers as a basis of electric heaters with self-regulating temperature. The effect of multistage mechanical activation of multilayer carbon nanotubes (MCNTs) with graphite on the uniformity of the temperature field distribution on the surface of nanomodified organosilicon elastomer has been studied. The influence of the stages of mechanical action on the parameters of MCNTs is revealed. It has been ascertained that for the MCNTs/graphite bulk material, which has passed the stage of mechanical activation in the vortex layer apparatus, a more uniform distribution of the temperature field and an increase in temperature to 57.1 °C at the supply voltage of 100 V are typical. The distribution of the temperature field in the centrifugal paddle mixer “WF-20B” for mixing MCNTs with graphite has been investigated. It has been found that there is also a thermal effect in addition to the mechanical action on the MCNTs in the paddle mixer “WF-20B”. The thermal effect is associated with the transfer of the mechanical energy of friction of the binary mixture MCNTs/graphite on the paddle and the walls of the vessel. The multiplicity of the starting current I_p to the nominal I_n (I_p/I_n) is 5 for the first sample, 7.5 for the second sample, and 10 for the third sample at the supply voltage of 100 V. The effect of reducing the starting current and stabilizing the temperature indicates the presence of self-regulation, which is expressed in maintaining a certain level of temperature.