The preparation of biodegradable active packaging materials is still a major challenge. Here, we report the fabrication and characterization of poly(butylene succinate)-based (PBS) films enriched with a natural polyphenolic antioxidant—quercetin. The PBS-based films with various quercetin content (0.05; 0.10; 0.25 and 0.50 pph on PBS) were prepared via a solvent casting method. Physical (optical, mechanical, thermal, moisture and water sorption, water vapor and UV–vis barrier) and biofunctional (antioxidant and antibacterial against Escherichia coli and Staphylococcus aureus) film properties were tested. The migration of quercetin into model food liquid systems was determined. As a result of quercetin addition, significant changes in color, opacity and UV-blocking effect were observed. The presence of the active substance did not significantly affect the thermal properties of the PBS matrix. However, the mechanical properties of the films were slightly decreased. The films exhibited excellent free radicals (DPPH, ABTS, O₂⁻) scavenging and some bactericidal activities. PBS-quercetin films with superior functional properties have many possibilities for active food packaging applications.

Bioactive films find more and more applications in various industries, including packaging and biomedicine. This work describes the preparation, characterization and physicochemical, antioxidant and antimicrobial properties of alginate films modified with melanin from watermelon (Citrullus lanatus) seeds at concentrations of 0.10%, 0.25% and 0.50% w/w and with silver and zinc oxide nanoparticles (10 mM film casting solutions for both metal nanoparticles). Melanin served as the active ingredient of the film and as a nanoparticle stabilizer. The additives affected the color, antioxidant (~90% ABTS and DPPH radicals scavenging for all melanin modified films) and antimicrobial activity (up to 4 mm grow inhibition zones of E. coli and S. aureus for both zinc oxide and silver nanoparticles), mechanical (silver nanoparticles addition effected two-fold higher tensile strength), thermal and barrier properties for water and UV-vis radiation. The addition of ZnONP resulted in improved UV barrier properties while maintaining good visible light transmittance, whereas AgNP resulted in almost complete UV barrier and reduced visible light transmittance of the obtained films. What is more, the obtained films did not have an adverse effect on cell viability in cytotoxicity screening. These films may have potential applications in food packaging or biomedical applications.

Green synthesis of nanoparticles for use in food packaging or biomedical applications is attracting increasing interest. In this study, the effect of the degree of substitution (0.7, 0.9 and 1.2) of a carboxymethylcellulose polymer matrix on the synthesis and properties of silver nanoparticles using melanin as a reductant was investigated. For this purpose, the mechanical, UV–Vis barrier, crystallinity, morphology, antioxidant and antimicrobial properties of the films were determined, as well as the color and changes in chemical bonds. The degree of substitution effected noticeable changes in the color of the films (the L* parameter was 2.87 ± 0.76, 5.59 ± 1.30 and 13.45 ± 1.11 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag samples, respectively), the UV–Vis barrier properties (the transmittance at 280 nm was 4.51 ± 0.58, 7.65 ± 0.84 and 7.98 ± 0.75 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag, respectively) or the antimicrobial properties of the films (the higher the degree of substitution, the better the antimicrobial properties of the silver nanoparticle-modified films). The differences in the properties of films with silver nanoparticles synthesized in situ might be linked to the increasing dispersion of silver nanoparticles as the degree of CMC substitution increases. Potentially, such films could be used in food packaging or biomedical applications.

The use of food industry waste as bioactive compounds in the modification of biodegradable films as food packaging remains a major challenge. This study describes the preparation and bioactivity characterization of poly(butylene succinate) (PBS)-based films with the addition of the bioactive compounds curcumin (CUR) and carvacrol (CAR). Films based on PBS modified with curcumin and carvacrol at different concentration variations (0%/0.1%/1%) were prepared by solvent casting method. The antioxidant, antimicrobial, and antibiofilm properties were investigated against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans). As a result of the modification, the films exhibited free radicals scavenging (DPPH up to 91.47% and ABTS up to 99.21%), as well as antimicrobial (6 log, 4 log, and 2 log reductions for E. coli, S. aureus, and C. albicans, respectively, for samples modified with 1% CUR and 1% CAR) activity. Moreover, antibiofilm activity of modified materials was observed (8.22–87.91% reduction of biofilm, depending on bioactive compounds concentration). PBS films modified with curcumin and carvacrol with observed bifunctional properties have many potential applications as active packaging.

The new generation of food packaging should not only be biodegradable, but also provide additional protective properties for packaged products, extending their shelf life. In this paper, we present the results of research on cast-extruded poly(butylene succinate) (PBS) films coated with hydroxypropyl methylcellulose (HPMC) modified with CO₂ extract from sea buckthorn (ES) or its ethosomes (ET) at amounts of 1 or 5 pph per HPMC. In addition, the developed films were exposed to accelerated aging (UV radiation and elevated temperature) to determine its effect on the films’ properties. Based on SEM, it can be concluded that accelerated aging results in the uncovering of the extract and ethosomes from the coating’s bulk. GPC showed a decrease in the molecular weight of PBS after treatment, additionally amplified by the presence of HPMC. However, the addition of ES or ET in low concentrations reduced the level of polyester degradation. The presence of the modified coating and its treatment increased the oxygen barrier (a decrease from 324 cm³/m² × 24 h for neat PBS to 208 cm³/m² × 24 h for the coated and modified PBS ET5). Despite the presence of colored extract or ethosomes in the coating, the color differences compared with neat PBS were imperceptible (ΔE < 1). The addition of 5 pph of sea buckthorn extract or its ethosomes in combination with accelerated aging resulted in the complete inhibition of the growth of E. coli and S. aureus, which was not observed in non-aged samples. The results obtained demonstrate an improvement in bioactive properties and protection against the negative effects of UV radiation on the film due to the presence of ET or ES in the coating. The developed systems could be used in the food industry as active packaging.

Food packaging has to preserve food products, not only providing protection against mechanical factors, but also providing antioxidant and antimicrobial protection. This article describes the effects of PBS film modification with two sea buckthorn extracts (chloroform extract and supercritical CO₂ extract) at two different concentrations (1 or 5 g per 100 g of polymer). The films were tested to determine the effect of the active additive on optical properties, mechanical properties, moisture sorption, antioxidant and antimicrobial properties (against Escherichia coli, Staphylococcus aureus, and Candida albicans). The extracts improved free radical scavenging significantly (up to 41.13 ± 1.31% for PBS-CO₂ 0.05) and reduced the number of microorganisms studied (more than a 6000-fold reduction for E. coli, a 1400-fold reduction in S. aureus and a 1200-fold reduction in C. albicans). The ability to block UV radiation was dependent on the concentration of extracts in the polymer matrix. No significant changes were noticed for mechanical properties or FTIR spectra. The films obtained appear to be potential packaging materials for food products with special protective properties.