Natural Gas Hydrate (NGH) develops and exists in pores of soil sediments under deep seabed and permafrost regions. A cavitation jet is an efficient method of rock breaking, especially for soft hydrate sediment erosion. This paper presents an experimental apparatus that was developed to synthesize NGH and hydrate-bearing sediments and analyze the drilling efficiency of the cavitation jet. The visualization study of fluid flow and breaking mechanism can be conducted over a temperature range varying from −20 °C to 100 °C and up to a maximum confining pressure of 20 MPa. This apparatus is mainly composed of the pressure control and injection system, the cooling system, the cavitation system, and the reaction vessels into which the lab-fabricated temperature/pressure/resistivity sensor probe is inserted. The basic principles of this apparatus are discussed, and a series of experiments were performed to verify that the cavitating jet can be practically applied in the exploitation of NGH reservoirs.

Sand production is one of the main problems restricting the safe, efficient and sustainable exploitation of marine natural gas hydrate. To explore the sand-control effects of gravel packing, experiments that simulate hydrate extraction in the water-rich environment were conducted with designed hydrate synthesis and exploitation devices. Three sand control completion methods, including 120 mesh sand screen, 400 mesh sand screen, 120 mesh sand screen combined with gravel packing, are adopted. Sand and gas production rates were compared under different well types and sand control completion methods. Results show that the gas production modes of radial wells and vertical wells are almost the same at the same time due to the small experimental scale and high permeability. The sand production of the vertical well with gravel packing combined with a sand-control screen is 50% lower than that of the vertical well with sand-control screens only. Radial well with gravel packing combined with sand-control screens produced 87% less sand than screen mesh alone. The cumulative gas production and recovery rates of a radial well with the composite sand control method are better than those without gravel packing in the same development time.

Enhanced oil recovery (EOR) is a crucial technology in the petroleum industry, influenced by several factors, including flooding fluids and methods. The adjustment of injection strategies and the application of vibration stimulation can significantly impact oil recovery, especially residual oil. In this study, we conducted experiments using a glass micromodel to investigate the effect of pulsing water injection on oil recovery. Our results show that when the pulse frequency matches the natural frequency of the micromodel, resonance occurs during the two-phase flow of pulse driving, which causes an increase in the amplitude of oscillation, enhances the mobility of oil, and improves recovery. The efficiency of the kinetic energy of displacement is also improved. However, when the frequency is 3 Hz, the absence of resonance leads to the opposite effect. In addition, we found that a greater amplitude increases the fluidity of oil. These findings have significant implications for the design of EOR strategies and methods. Our experimental results provide insight into the effect of pulse water injection on oil recovery and offer a potential strategy for the optimization of EOR techniques.