Enhanced oil recovery (EOR) is a crucial technology in the petroleum industry, influenced by several factors, including flooding fluids and methods. The adjustment of injection strategies and the application of vibration stimulation can significantly impact oil recovery, especially residual oil. In this study, we conducted experiments using a glass micromodel to investigate the effect of pulsing water injection on oil recovery. Our results show that when the pulse frequency matches the natural frequency of the micromodel, resonance occurs during the two-phase flow of pulse driving, which causes an increase in the amplitude of oscillation, enhances the mobility of oil, and improves recovery. The efficiency of the kinetic energy of displacement is also improved. However, when the frequency is 3 Hz, the absence of resonance leads to the opposite effect. In addition, we found that a greater amplitude increases the fluidity of oil. These findings have significant implications for the design of EOR strategies and methods. Our experimental results provide insight into the effect of pulse water injection on oil recovery and offer a potential strategy for the optimization of EOR techniques.

The CO₂-enhanced oil recovery (EOR) technology has the dual significance of enhancing oil recovery and realizing carbon storage in onshore and offshore oil and gas exploitation. This study investigates the adsorption of crude oil components on quartz surfaces and the microscopic mechanisms of CO₂ stripping from crude oil using molecular dynamics simulations. A four-component model representing C₆H₁₄, benzene, resins, and asphaltenes was constructed to simulate the oil phase, while the quartz surface model was created using Materials Studio. Simulations were conducted under different temperature conditions to understand the distribution and adsorption behavior of crude oil components, as well as the impact of CO₂ on the oil film at pressures up to 10 MPa. The results indicate that the resin–asphaltene interactions are significantly weakened at elevated temperatures, affecting the adsorption capacity. Furthermore, CO₂ stripping primarily extracts light components such as C₆H₁₄ and aromatic hydrocarbons, while heavy components remain in the oil phase. The highest extraction efficiency and expansion effect of CO₂ were observed at 35 °C, demonstrating optimal conditions for enhanced oil recovery through CO₂ flooding. These findings provide insights into the effective use of CO₂ for crude oil extraction and its interactions with oil components on a quartz substrate, which is crucial for optimizing CO₂-enhanced oil recovery operations.