Jiamin Zhu

Dr. Jiamin Zhu


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JJJianxun Jin
Jianxun Jin
GSGuang Sheng
Guang Sheng
YBYanfang Bi
Yanfang Bi
YSYuntao Song
Yuntao Song
XLXiaolong Liu
Xiaolong Liu
Jian ZhuJian Zhu
Jian Zhu
AbstractWith regard to the state-of-the-art technologies in the fields of applied superconductivity and electromagnetic devices, research and development highlights are presented. The recent progress and achievement described with principle and technical details include mainly i) applied superconducting materials; ii) superconducting magnets and their applications such as in ITER and Tokamaks; iii) high Tc superconducting (HTS) magnetic levitation and applications; iv) HTS smart grids; v) superconducting and electromagnetic material modelling and characteristics; vi) advanced electromagnetic devices. The applied superconductivity technology and availability are especially focused and verified with the trend of its development prospection.

5 December 2024 in Superconductor Science and Technology
Verified
Journal Article
Closed access
HGHanxiao Guo
Hanxiao Guo
Gao PeifengGao Peifeng
Gao Peifeng
SCSikan Chen
Sikan Chen
JZJiamin Zhu
Jiamin Zhu
Rare-earth barium copper oxide (REBCO) coated conductor (CC) tapes are promising for high-energy and high-electromagnetic field applications. In epoxy-impregnated REBCO superconducting coils, due to the weak c-axial strength of REBCO CC tapes, delamination induced by thermal-mismatch stress and Lorentz force significantly threatens stable operation. The commonly used numerical modelling methods mainly include homogenized model and refined model. The former can realize the efficient calculation of the overall physical field but lose the local details including interfacial delamination behaviour, while the latter can realize the refined calculation but cost massive calculation. In this study, combining with bilinear cohesive zone model (CZM), a two-dimensional axisymmetric concurrent multiscale model was developed to balance the efficiency-accuracy trade-off for numerically investigating the mechanical properties and interface failure behaviours of REBCO superconducting coils under cryogenics and high-electromagnetic field. In the presented model, the homogenized superconducting coil was firstly constructed based on composites homogenized approach to estimate the electromagnetic-thermal-mechanical properties at macro scale. Then, the ‘dangerous regions’ in the macro scale was recognized based on quadratic failure criterion and replaced with a refined model considering delamination failure defined by CZM. Finally, the two scales are linked through the coupling interface. The accuracy and efficiency of the concurrent multiscale model were validated by refined model for the cases of delamination behaviour during cooling and excitation.

10 October 2022 in Superconductor Science and Technology
Verified
Journal Article
Closed access
CGChunjiang Guo
Chunjiang Guo
SCSikan Chen
Sikan Chen
XLXiao Liu
Xiao Liu
JSJiangtao Shi
Jiangtao Shi
YWYue Wu
Yue Wu
YZYue Zhao
Yue Zhao
The slit technique is an essential process for narrowing the second-generation high-temperature superconducting (2G-HTS) tapes. It is still very challenging to eliminate edge defects introduced during slitting. In this work, we developed a set of reel-to-reel laser slit (LS) equipment for narrowing 2G-HTS tapes using a femtosecond infrared laser. In comparison with the commonly used mechanical slit (MS) technique, the LS technique produced no cracks at the tape edges. Electro-mechanical behaviors of 2G-HTS tapes with MS and LS edges were compared in liquid nitrogen conditions. The results of the uniaxial tensile tests showed only a minor difference in irreversible tensile stress/strain of the two kinds of tapes. However, uniaxial tensile fatigue tests showed that the critical current (I c) retention of the LS tapes was about 14% higher than that of the MS tapes after 104 cycles (@ 77 K, σ max = 0.8σ y, and a stress ratio of 0.1). Moreover, U-Spring compressive tests revealed that no irreversible I c degradation occurred on the LS tapes under compressive strain up to −0.8%, with high reproducibility. On the contrary, the irreversible compressive strains of the MS tapes were rather scattered, ranging from −0.75% to −0.2%. Enhancement of electro-mechanical behaviors is strongly linked to fewer edge defects in the LS tapes. This research demonstrates significant advantages of the LS technique over the conventional MS technique, showing its promising prospects for demanding applications.

18 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
JZJiamin Zhu
Jiamin Zhu
SCSikan Chen
Sikan Chen
ZJZhijian Jin
Zhijian Jin
The resistive superconducting fault current limiter is well known for its simple structure and outstanding current-limiting effect, and it is broadly applied in power grid systems. The second-generation high-temperature superconductor (HTS) tape, of higher structural strength and greater room-temperature resistance, is well suited for application in resistive superconducting fault current limiters. The quenching caused by overcurrent in the HTS tape is a complexed coupling effect of several physical factors. The tape structure and properties directly impact the ultimate HTS tape’s quench performance. In this study, various SS316-laminated HTS tapes, of different critical currents, room-temperature resistances, and masses, were prepared. The pulse impact parameters of the various tape samples were measured using the RLC high-current impact test platform. By analyzing the resultant data, a quantitative assessment methodology to measure a tape’s tolerance toward impact was developed. The dependence of the HTS tape’s tolerance toward impact on its critical current, room-temperature resistance, and mass was studied. This provides numerical guidance on HTS material selection for resistive superconducting fault current limiters.

15 March 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TQTiming Qu
Timing Qu
YLYufan Li
Yufan Li
PSPeng Song
Peng Song
CHChanghong Hao
Changhong Hao
QWQihong Wu
Qihong Wu
ZHZhenghe Han
Zhenghe Han
In this work, a 10 kW / 150 rpm fully superconducting synchronous generator was designed and sent for manufacturing, which installs HTS coils in both the stator and the rotor. It has a basic structure of eight poles and nine slots. The concentrated winding was adopted, and there are 16 field coils and 18 armature coils wound by using 5 mm wide YBCO tapes. The total tape consumption is around 2.0 km. Iron cores assembled by silicon-steel sheets will be installed in both the stator and the rotor. The peak gap field of 0.87 T can be achieved with a 42 A excitation current in field coils. The armature electric loading can reach 400 A/cm at the rated output. The present machine is designed to be cooled by using liquid nitrogen. The cryogenic structure can be divided into two parts: the conduction cooled rotating part for field coils, and the immersion cooled static part for armature coils. Both parts share the same vacuum chamber. A novel thermal insulated torque coupling (TITC) will be installed to link the cold rotor and the warm shaft. The ac loss of armature coils was studied by H-formulation and it is within a reasonable range.

13 December 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
XZXintao Zhang
Xintao Zhang
HLHuajun Liu
Huajun Liu
FLFang Liu
Fang Liu
LSLiangjun Shao
Liangjun Shao
SHShuai Hu
Shuai Hu
HMHongjun Ma
Hongjun Ma
This paper presents the design and preliminary test results of a 20 T REBCO insert coil for a 35 T all superconducting magnet. The 20 T insert coil consists of two coils nested in series. The internal coil (coil 1) is composed of a stack of 20 REBCO double pancake (DP) coils, and the no-insulation (NI) winding approach was applied to increase its current density. The outer coil (coil 2) consists of 28 REBCO DP coils, metal-as-insulation (MI) technology was used to improve the overall mechanical strength and reduce the charging-delay time constant. The electromagnetic and mechanical analysis considering the screening current (SC) effect have been discussed in detail. The maximum hoop stress and hoop strain of the insert coil with the SC effect under operating conditions are 1010 MPa and 0.658%, respectively, but some favorable conditions have not been considered. The tests at 77 K and all assembly work have been completed. The preliminary test results of the insert coil at 4.2 K in self-field show that the large resistances of DP 3 and DP 4 in coil 1 caused the local temperature to rise, which led to the early quench of the whole insert coil. The maximum applied current was 229 A, and the actual central magnetic field with the SC effect was 18.4 T.