Three‐dimensional bioactive, antioxidant, and porous nanocomposite scaffolds are inevitable to avoid dependency and disability in the life cycle. Herein, we develop a facile fabrication protocol of nano porous zinc doped hydroxyapatite (Zn‐HAp) scaffold enhanced by polysaccharide polymeric structure for bone tissue engineering applications. The bioactive nano scaffold exhibit opens porous assembly that sustains its flexible and robust nature and promotes efficient linking capability. Moreover, nano scaffold geometry and its porosity were controlled efficiently in various concentrations of zinc doped hydroxyapatite (Zn‐HAp) nanoparticles. Indeed, the composite scaffolds are retained in a dry shape with a suitable load‐bearing strength adjacent to the cancellous bone. The presence of zinc doped hydroxyapatite in the polymeric matrix of nano scaffold regulates its antibacterial response against different bacterial strains owing to its oxidative stress nature. The antioxidant and biocompatibility of nano‐scaffolds were investigated by DPPH (1,1‐diphenyl‐2‐picrylhydrazyl) scavenging behavior, the scavenging activity of ABTS (2,2‐azino‐bis‐3‐ethylbenzthiazoline‐ 6‐sulphonic acid) radical, and iron‐chelating potential. The observed results reveal that polysaccharide‐dependent porous geometry possesses adequate biocompatibility, radical scavenging behavior, and excellent antibacterial properties that validate it as a suitable candidate material for bone tissue implantation. The unprecedented radical scavenging and antioxidant bioactive nanocomposite scaffold are all set to reshape the future bone tissue implantation.
Herein, Sr x Zn 1−x Fe 2 O₄ nanoparticles produced by chemical co-precipitation are examined to determine how strontium (Sr) doping affects their structural, morphological, optical, and dielectric characteristics. The creation of a single-phase cubic spinel structure was verified by X-ray diffraction, and peak shifts indicated lattice expansion brought on by the addition of Sr. A homogeneous grain morphology with nanoscale dimensions was found by FESEM investigation. The metal-oxygen vibrational modes in the Raman and FTIR spectra showed changes that suggested local structural distortion. With a lowered optical bandgap of 2.62 ± 0.1 eV, UV-Vis spectroscopy revealed a red shift in the absorption edge, improving semiconducting properties. AC conductivity and complex modulus tests revealed improved charge transport and relaxation behavior, whereas impedance spectroscopy indicated decreased dielectric loss (tan δ) at high frequencies. Mössbauer spectroscopy revealed that doping resulted in a redistribution of Fe 2+ between tetrahedral and octahedral sites. According to these results, Sr-doped ZnFeO₄ is a promising material for use in high-frequency and optoelectronic device applications. This work develops a structure-cation engineering approach, where Mössbauer spectroscopy validates cation redistribution, allowing for simultaneous tuning of optical and dielectric properties, providing a new avenue for the development of ferrite-based optoelectronic and energy storage materials.
Solar-driven evaporation is a promising technology for desalinating seawater and wastewater without mechanical or electrical energy. The approaches to obtaining fresh water with higher evaporation efficiency are essential to address the water-scarcity issue in remote sensing areas. Herein, we report a highly efficient solar evaporator derived from the nanocomposite of anatase TiO2/activated carbon (TiO2/AC), which was coated on washable cotton fabric using the dip-dry technique for solar water evaporation. The ultra-black fabric offers enhanced solar absorption (93.03%), hydrophilic water transport, and an efficient evaporation rate of 1.65 kg/m2h under 1 kW m−2 or one sun solar intensity. More importantly, the sideways water channels and centralized thermal insulation of the designed TiO2/AC solar evaporator accumulated photothermal heat at the liquid and air interface along with an enhanced surface temperature of 40.98 °C under one sun. The fabricated solar evaporator desalinated seawater (3.5 wt%) without affecting the evaporation rates, and the collected condensed water met the standard of drinking water set by the World Health Organization (WHO). This approach eventually enabled the engineering design groups to develop the technology pathways as well as optimum conditions for low-cost, scalable, efficient, and sustainable solar-driven steam generators to cope with global water scarcity.
1
21 February 2023 in Journal of Materials Science: Materials in Electronics
The treatment of bone cancer often necessitates the surgical removal of affected tissues, with artificial implants playing a critical role in replacing lost bone structure. Functionalized implants represent an innovative approach to improve bio-integration and the long-term effectiveness of surgery in treating cancer-damaged bones. In this study, nickel-substituted hydroxyapatite (Ni:HAp) nanoparticles were deposited as thin films using laser pulses in the range of 30,000–60,000. Comprehensive structural, infrared, optical, morphological, surface, and magnetic evaluations were conducted on the synthesized Ni:HAp thin films. The magnetic hysteresis (M-H) loop demonstrated an increase in the saturation magnetization of the films with a higher number of laser pulses. A minimum squareness ratio of 0.7 was observed at 45,000 laser pulses, and the M-H characteristics indicated a shift toward ferromagnetic behavior, achieving the desired thermal response through an alternating magnetic field application within 80 s. Thermogravimetric analysis revealed distinct thermal stability, with the material structure exhibiting 46% degradation at 800 °C. The incorporation of bioactive magnetic nanoparticles in the thin film holds significant promise for magnetic hyperthermia treatment. Using HDOCK simulations, the interactions between ligand molecules and proteins were also explored. Strong binding affinities with a docking score of −67.73 were thus observed. The presence of Ca2+ ions enhances electrostatic interactions, providing valuable insights into the biochemical roles of the ligand in therapeutic applications. Intravenous administration of magnetic nanoparticles, which subsequently aggregate within the tumor tissue, combined with an applied alternating magnetic field, enable targeted heating of the tumor to 45 °C. This focused heating approach selectively targets cancer cells while preserving the surrounding healthy tissue, thereby potentially enhancing the effectiveness of hyperthermia therapy in cancer treatment.