A numerical homogenization approach is presented for the effective elastic moduli of 3D printed cellular infills. A representative volume element of the infill geometry is discretized using either shell or solid elements and analyzed using the finite element method. The elastic moduli of the bulk cellular material are obtained through longitudinal and shear deformations of a representative volume element under periodic boundary conditions. The method is used to analyze the elastic behavior of gyroid infills for varying infill densities. The approach is validated by comparing the Young’s modulus and Poisson’s ratio with those obtained from compression experiments. Results indicate that although the gyroid infill exhibits cubic symmetry, it is nearly isotropic with a low anisotropy index. The numerical predictions are used to develop semi-empirical equations of the effective elastic moduli of gyroid infills as a function of infill density in order to inform design and topology optimization workflows.
An improved simulation-based thermoforming design process based on the integration of material characterization and as-formed structural analysis is proposed. The tendency of thermoplastic composites to wrinkle during forming has made simulation critical to optimized manufacturing, but the material models required are complex and time consuming to create. A suite of experimental methods has been developed for measurement of several required properties of the molten thermoplastic composite. These methods have the potential to enhance thermoplastic composites manufacturing by simplifying and expediting the process. These material properties have been verified by application to thermomechanical forming predictions using commercial simulation software. The forming predictions showed improved agreement with experimental results compared to those using representative material properties. A tool for using thermoforming simulations to inform more accurate structural models has been tested on a simple case study, and produced results that clearly differ from those of models using idealized fiber orientations and thicknesses. This provides evidence that this type of as-formed analysis may be necessary in some cases, and may be further investigated as an open source alternative to commercial analysis software.
Large Area Additive Manufacturing (LAAM) enables the rapid production of thermoplastic polymer structures but suffers from significant anisotropy and 3D printability limitations. These limitations often require additional material and time in order to incorporate supporting structures. This research explores the integration of continuous fiber reinforced thermoplastics (CFRTP) with LAAM structures. A series of experimental trials were performed, which demonstrate the feasibility and benefits of CFRTP integration, as it can improve structural strength, lightweighting, and manufacturing flexibility. The findings suggest that CFRTP integration can significantly enhance LAAM by reducing material usage, improving mechanical properties, and expanding design possibilities. While further research is needed to optimize the process for specific applications, this process of Hybrid Advanced Additive Manufacturing (HAAM) presents a promising approach for advancing large-scale additive manufacturing.
24 June 2025 in Progress in Additive Manufacturing
A combined numerical and experimental approach is implemented to determine the effective yield strength of additively manufactured gyroid infills. A representative volume element of the infill geometry is discretized using solid elements and analyzed using the finite element method with an elastic–plastic constitutive model. The effective compressive and shear yield strengths of the cellular material are obtained for varying infill densities through compressive and shear deformations of the representative volume element under periodic boundary conditions. The numerically obtained compressive and shear yield strengths compare well with experimental data for gyroid infill prototypes manufactured using a polymer extrusion-based 3D printer. The numerical predictions are used to develop a simple semi-empirical relationship for the effective yield strength as a function of the relative density. This relationship is expected to be useful in design workflows utilizing the gyroid infill, specifically those involving topology optimization.