In this paper, an effective method to suppress mutual coupling between two substrate integrated waveguide (SIW) slot antenna arrays is presented. To achieve that, a decoupling feed network is used. The feed network is composed of a two-layer directional coupler that is connected to two SIW-slot antenna arrays directly to establish an indirect coupling with controlled magnitude and phase, which can effectively reduce the direct coupling generated by surface waves between the array elements. A 2×4 array of slot antenna as well as the proposed decoupling network is designed, fabricated, and measured to illustrate the effectiveness of the proposed technique. The measured and simulated results verified the good decoupling performance. The measured mutual coupling is about -35 dB at the center frequency without negatively affecting the return loss and radiation patterns. The proposed mechanism of the decoupling network is simple and successfully used in SIW slot antenna arrays.

In this paper, a new method to facilitate the design of Printed Ridge Gap Waveguide (PRGW) structures is introduced. One of the main difficulties in designing such structures is related to their simulation process which is really time and energy-consuming. Therefore, a suitable boundary condition is considered to bring about the primary structure without involving the bed of nails or mushroom unit cells. Using this technique, a wideband PRGW 3 dB hybrid double-box coupler is designed to serve in mm-wave frequencies at a center frequency of 30 GHz, which can be deployed for the next generation of mobile communication. The designed coupler provides a wide matching and isolation bandwidth with low output amplitude imbalance, which is unique in comparison with current couplers. The prototype of the proposed coupler is fabricated and measured where the simulation and measurement results show a good agreement indicating the strength of the proposed method in PRGW structure design as well. The measured results show the couplers achieve better than 10-dB return loss and isolation over the frequency range from 25 to 40 GHz (46% BW) with the power-split unbalance and phase error within ± 1 dB and ± 5°, respectively. In addition, square mushrooms are chosen here to satisfy the high impedance surface. Not only do they bring about larger stop bandwidth, but also their configuration facilitates the arrangement of them around the coupler. The proposed design has superb characteristics such as low profile, low loss, and easy integration with microwave circuits and systems that can be suitable for designing mm-wave beamforming networks.

This paper presents a wideband 3-dB coupler using printed ridge gap waveguide (Printed-RGW) technology for millimeter-wave (mm-wave) applications. The proposed printed-RGW 3-dB coupler can be considered as an excellent candidate for developing wideband feeding beam-forming antenna systems designated for future 5G and beyond wireless communications. The proposed 3-dB coupler structure has the isolation and matching level of less than -12 dB and acceptable insertion losses over the whole operating frequency band. The simulated results, carried out using full-wave CST Microwave Studio software, show a relatively wide bandwidth of about 26% at Ka-Band.

This paper presents a high-performance circularly polarized (CP) magneto-electric (ME) dipole antenna optimized for wideband millimeter-wave (mm-wave) frequencies, specifically targeting advancements in 5G and 6G technologies. The CP antenna is excited through a transverse slot in a printed ridge gap waveguide (PRGW), which operates in a quasi-transverse electromagnetic (Q-TEM) mode. Fabricated on Rogers RT 3003 substrate, selected for its low-loss and cost-effective properties at high frequencies, the design significantly enhances both impedance and axial ratio (AR) bandwidths. The antenna achieves an impressive impedance bandwidth of 31% (25.24–34.50 GHz) and an AR bandwidth of 24.9% (26.40–33.91 GHz), with a peak gain of up to 8.4 dBic, demonstrating a high cross-polarization level. The experimental results validate the high-performance characteristics of the antenna, making it a robust candidate for next-generation wireless communication systems requiring CP capabilities.

This work presents a novel dual-polarized antenna array tailored for Internet of Things (IoT) applications, specifically designed to operate in the millimeter-wave (mm-wave) spectrum within the frequency range of 30–60 GHz. Leveraging printed ridge gap waveguide (PRGW) technology, the antenna ensures robust performance by eliminating parasitic radiation from the feed network, thus significantly enhancing the reliability and efficiency required by IoT communication systems, particularly for smart cities, autonomous vehicles, and high-speed sensor networks. The proposed antenna achieves superior radiation characteristics through a cross-shaped magneto-electric (ME) dipole backed by an artificial magnetic conductor (AMC) cavity and electromagnetic bandgap (EBG) structures. These features suppress surface waves, reduce edge diffraction, and minimize back-lobe emissions, enabling stable, high-quality IoT connectivity. The antenna demonstrates a wide impedance bandwidth of 24% centered at 30 GHz and exceptional isolation exceeding 40 dB, ensuring interference-free dual-polarized operation crucial for densely populated IoT environments. Fabrication and testing validate the design, consistently achieving a gain of approximately 13.88 dBi across the operational bandwidth. The antenna’s performance effectively addresses the critical requirements of emerging IoT systems, including ultra-high data throughput, reduced latency, and robust wireless connectivity, essential for real-time applications such as healthcare monitoring, vehicular communication, and smart infrastructure.