Yue Cheng

Dr. Yue Cheng

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2025 in Metals
Verified
Journal Article
Open access
PDF file
WHWu Huiyong
Wu Huiyong
DTDong Tingting
Dong Tingting
ZZZhou Zhang
Zhou Zhang
YCYue Cheng
Yue Cheng
Lithium has emerged as a critical energy metal due to its indispensable role in batteries, aerospace applications, new energy vehicles, and large-scale energy storage systems. The accelerated growth of electric mobility and renewable energy storage has led to a substantial increase in lithium demand, thereby exacerbating the prevailing global supply–demand imbalance. To address this challenge, it is imperative to diversify lithium resources and to advance extraction technologies that are both efficient and sustainable. In comparison with conventional hard-rock deposits, liquid resources such as salt lake brines, oilfield brines, and deep-well brines are gaining attention owing to their broad distribution, abundant reserves, and advantages of reduced land use, lower water consumption, and lower carbon emissions. This work presents a critical review of current lithium recovery strategies from brines, including precipitation, solvent extraction, adsorption, nanofiltration/electrodialysis, and electrochemical methods. Each approach is critically evaluated in terms of Li/Mg selectivity, extraction efficiency, operational stability, and environmental compatibility. Precipitation processes offer simplicity but suffer from low Li recovery and high chemical consumption; solvent extraction achieves high selectivity but faces phase and reagent loss; adsorption using Mn-based sieves yields high capacity with good regeneration stability, whereas membrane and electrochemical systems enable continuous lithium recovery with reduced energy input. Distinct advantages and existing gaps are systematically summarized to provide quantitative insights into performance trade-offs among these pathways. Key findings highlight that organophosphorus–FeCl3 systems and Mn-based lithium-ion sieves show the best trade-off between selectivity and regeneration stability, whereas emerging membrane–electrochemical hybrids demonstrate promise for low-energy, continuous lithium recovery. The prospects for future development highlight highly selective functional materials, integrated multi-technology processes, and greener, low-energy extraction pathways.

21 February 2022 in Coatings
Verified
Journal Article
Open access
PDF file
YCYue Cheng
Yue Cheng
TCTing Cao
Ting Cao
ZXZhiguo Xiao
Zhiguo Xiao
HZHaijie Zhu
Haijie Zhu
MYMiao Yu
Miao Yu
It is well known that water treatment of printing and dyeing wastewaters is problematic. In order to decompose dyes from dyestuff wastewater and convert them into almost harmless substances for the natural environment, an easily prepared, efficient, practical, and easy-to-regenerate composite material was produced from porous floating ceramsite loaded with cuprous oxide (PFCC). The PFCC samples were prepared and characterized by X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). The material was applied for photocatalytic degradation of methyl orange (MO) in water. The results show that the maximal degradation rate of MO was 92.05% when the experimental conditions were as follows: cuprous oxide loading rate of 8%, PFCC dosage of 20 g/L, the reaction time of 2 h, pH value of 8, and solution initial concentration of 30 mg/L. The degradation processes of MO fits well with the Langmuir–Hinshelwood model in reaction kinetics, and the Freundlich model in reaction thermodynamics, respectively. The degradation mechanism of MO was considered from two perspectives—one was the synergetic effect of adsorption and photocatalytic oxidation, and the other was the strong oxidation of hydroxyl radicals produced by photocatalysts.

1 April 2015 in Desalination and Water Treatment
Verified
Journal Article
Open access
YCYue Cheng
Yue Cheng
CJChuang Jiao
Chuang Jiao
WFWenjing Fan
Wenjing Fan
Three types of coated nanoscale zero-valent iron (C-nZVI) with different coatings, agar, starch, and carboxyl methyl cellulose, were synthesized using a rheological phase reaction method. The structure and morphology of C-nZVI particles were characterized by X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy. Batch tests of Pb(II) removal showed that the sample dosage, initial pH, initial Pb(II) concentration, and reaction time have significant effects on Pb(II) removal efficiency. Experimental results proved that an optimized pH value of 5, Pb(II) concentration of 100 mg/L, and C-nZVI dosage of 1 g/L are beneficial to Pb(II) removal. Kinetic study revealed that Pb(II) removal by C-nZVI in aqueous solution complies with quasi-first-order reaction kinetics, and the reaction rate constant of Pb(II) removal using W-nZVI is 6–27 higher than using unwrapped nZVI.

1 February 2013 in Environmental Technology
Verified
Journal Article
Closed access
YCYue Cheng
Yue Cheng
MLMang Lu
Mang Lu
CJChuang Jiao
Chuang Jiao
HLHai-Jiang Liu
Hai-Jiang Liu
In this study, sodium carboxymethyl cellulose (NaCMC)-stabilized nano zero-valent iron (C-nZVI) was synthesized using a rheological phase reaction method. The orthogonal method was used to evaluate the factors influencing C-nZVI properties and this showed that the reaction time, solid–liquid ratio (w/v), grinding time and NaCMC concentration were all important factors. Characterization with scanning electron microscopy validated the hypothesis that the introduction of CMC led to a decrease in aggregation of iron nanoparticles. X-ray diffraction confirmed the existence of Fe0 and the strong antioxidant activity of the iron particles. Batch decolourization experiments exhibited that solution pH, C-nZVI dosage and reaction time have significant effects on dye decolourization. A high decolourization efficiency (94.5%) was obtained within 30 min for 100 mg/L of reactive blue-19 at the optimal pH value of 5 and C-nZVI loading of 6 g/L at room temperature. The decolourization rates followed modified pseudo-first-order kinetic equations with respect to dye concentration. The observed removal rate constant was 0.0447 min−1 for the C-nZVI loading of 6 g/L.

16 January 2014 in Journal of Water Reuse and Desalination
Verified
Journal Article
Open access
PDF file
YCYue Cheng
Yue Cheng
LGLei Guo
Lei Guo
In this study, porous ceramsite carrier was modified using magnetic material as raw material. The magnetic porous ceramsite carrier was applied to the treatment of municipal landfill leachate. The results showed that the removal efficiency of chemical oxygen demand (COD), NH3-N and Cr6+ in the supernatant were all more than 90% after 30 days with the aeration rate of 3 L/h, the aeration time of 16 h/d and the temperature of 20–30 °C. The output concentration met the national life Landfill Pollution Control Standard (PR China GB16889-2008) requirements. The magnetic properties significantly improved the carrier biofilm formation, compared with the conventional activated sludge process and non-magnetic carrier. The COD, NH3-N and Cr6+ removal efficiency were 5–10%, 5–7% and 5–10%, respectively.

13 August 2015 in Water, Air, & Soil Pollution
Verified
Journal Article
Closed access
PDF file
MLMang Lu
Mang Lu
YCYue Cheng
Yue Cheng
SPShun-Long Pan
Shun-Long Pan
TYTing-Ling Yang
Ting-Ling Yang
ZZZhong-Zhi Zhang
Zhong-Zhi Zhang