Wearable textile electronics are highly desirable for realizing personalized health management. However, most reported textile electronics can either periodically target a single physiological signal or miss the explicit details of the signals, leading to a partial health assessment. Furthermore, textiles with excellent property and comfort still remain a challenge. Here, we report a triboelectric all-textile sensor array with high pressure sensitivity and comfort. It exhibits the pressure sensitivity (7.84 mV Pa−1), fast response time (20 ms), stability (>100,000 cycles), wide working frequency bandwidth (up to 20 Hz), and machine washability (>40 washes). The fabricated TATSAs were stitched into different parts of clothes to monitor the arterial pulse waves and respiratory signals simultaneously. We further developed a health monitoring system for long-term and noninvasive assessment of cardiovascular disease and sleep apnea syndrome, which exhibits great advancement for quantitative analysis of some chronic diseases.
Three types of coated nanoscale zero-valent iron (C-nZVI) with different coatings, agar, starch, and carboxyl methyl cellulose, were synthesized using a rheological phase reaction method. The structure and morphology of C-nZVI particles were characterized by X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy. Batch tests of Pb(II) removal showed that the sample dosage, initial pH, initial Pb(II) concentration, and reaction time have significant effects on Pb(II) removal efficiency. Experimental results proved that an optimized pH value of 5, Pb(II) concentration of 100 mg/L, and C-nZVI dosage of 1 g/L are beneficial to Pb(II) removal. Kinetic study revealed that Pb(II) removal by C-nZVI in aqueous solution complies with quasi-first-order reaction kinetics, and the reaction rate constant of Pb(II) removal using W-nZVI is 6–27 higher than using unwrapped nZVI.
Textile sensors are pivotal for next‐generation wearables, yet their advancement is hindered by challenges including nonlinear high‐sensitivity response and thermal drift. Here we propose a hierarchical assembly strategy to address these limitations and develop a temperature‐robust yarn sensor (TRYS). To fabricate high‐sensitivity piezoresistive fibers, we assemble modified S‐MXene nanosheets and silver nanowires (AgNWs) into the natural wool substrates, whose intrinsic hierarchical microstructure provides stable electrical contact and homogeneous stress distribution, thereby ensuring high sensitivity and linearity. These functionalized fibers are then twisted into sensing yarns and encapsulated using infrared‐reflective antimony‐doped tin oxide (ATO)‐filled polydimethylsiloxane (PDMS). Our TRYS exhibits great performance, featuring an ultra‐high gauge factor of 1468.43 with a linearity of 99.9%, a remarkable linear gauge factor (LGF) of 367, rapid response/recovery times (40/98 ms) and a subtle strain detection limit of 0.05%. With the protection of the ATO/PDMS layer, the TRYS exhibits excellent thermal robustness, achieving a temperature reduction of 42.8 compared with pure wool fibers at 200. Furthermore, integrated with machine learning, our TRYS enables reliable real‐time physiological monitoring and gesture recognition even under extreme thermal variations, demonstrating its potential for early risk warning in firefighting applications.