—Besides the return loss and radiation pattern, dispersion characteristic of the antenna is one of the most important factors which should be considered in ultra wideband applications. In this paper, dispersion behavior of two specific Vivaldi antennas has been fully investigated in both frequency and time domains. All simulations are carried out by CST MS software. Moreover, by fabricating the antennas, the simulation results are verified by experimental data.
1 January 2007 in Journal of Electromagnetic Waves and Applications
A new design of a broadband 1–18 GHz double ridged guide horn antenna with redesigned feeding section is presented. Several modifications are made in the structure of a conventional double ridged g...
5 June 2007 in IET Microwaves, Antennas & Propagation
A new approach for the design of high-frequency electromagnetic compatibility (EMC) broadband double-ridged horn (DRH) antennas is presented. In this approach, first a conventional DRH antenna at 1–18 GHz frequency band is considered. Using a thorough sensitivity analysis of different structural parameters of the 1–18 GHz DRH antenna, several modifications are applied to this antenna to overcome its deficiencies especially in its radiation pattern at higher frequencies. The final achieved design is then scaled up in the frequency to arrive at a design suitable for higher frequency ranges. A wideband DRH antenna for 18–40 GHz frequency band is then designed using this approach. The lower frequency ratio of 1:2.2 in the new antenna as opposed to the 1:18 ratio in the conventional antenna permits us to choose the best frequency window for the scaling up process. Besides, an optimisation technique is employed to further improve the antenna performance to meet the design goals over the entire new frequency band, that is, to have a single main lobe directed along the horn axis without any deterioration, and to have acceptable broadband gain with the minimum of 10 dB, and voltage standing wave ratio (VSWR) of less than 1.5. The final design which is more compact compared with the other commercial antennas has been used to make a prototype antenna. Measurements show that the built prototype meets the design goals very well.
Graphene plasmonic antennas possess two significant features that render them appealing for short-range wireless communications, notably, inherent tunability and miniaturization due to the unique frequency dispersion of graphene and its support for surface plasmon waves in the terahertz band. In this letter, dipole-like antennas using few-layer graphene are proposed to achieve a better trade-off between miniaturization and radiation efficiency than current monolayer graphene antennas. The characteristics of few-layer graphene antennas are evaluated and then compared with those of antennas based on monolayer graphene and graphene stacks, which could also provide such improvements. To this end, first, the propagation properties of one-dimensional and two-dimensional plasmonic waveguides based on the aforementioned graphene structures are obtained by transfer matrix theory and finite-element simulation, respectively. Second, the antennas are investigated as three-dimensional structures using a full-wave solver. Results show that the highest radiation efficiency among the compared designs is achieved with the few-layer graphene, while the highest miniaturization is obtained with the even mode of the graphene stack antenna.
10 May 2011 in International Journal of RF and Microwave Computer-Aided Engineering
The effects of mobile phone frequency electromagnetic field (RF-EMF, 940 MHz) on a stable cell line (HEK293T) harbouring the firefly luciferase gene were evaluated. A waveguide exposure system with 1 W input power provided the mean specific absorption rate of ≈0.09 W kg−1 in 35 mm Petri dishes. The effects of exposure duration (15, 30, 45, 60 and 90 min) on luciferase activity and oxidative response elements were investigated. Endogenous luciferase activity was reduced after 30 and 45 min of continuous exposure, while after 60 min, the exposed cell lysate showed higher luciferase activity compared with the non-exposed control. Reactive oxygen species (ROS) generation was highest in the 30 min exposed cells as studied by 2′,7′-dichlorodihydrofluorescein diacetate (DCFH-DA) fluorescence. The observed boost in ROS was then followed by a sharp rise in catalase (CAT) and superoxide dismutase (SOD) activity and elevation of glutathione (GSH) during the 45 min exposure. Decrease in lipid peroxidation (malondialdehyde, MDA) was meaningful for the 45 and 60 min exposed cells. Therefore, it appears that an increase in the activity of luciferase after 60 min of continuous exposure could be associated with a decrease in ROS level caused by activation of the oxidative response. This ability in cells to overcome oxidative stress and compensate the luciferase activity could also be responsible for the adaptive response mechanism detected in ionizing radiation studies with RF-EMF pre-treatments.