In recent years, unmanned aerial vehicles (UAVs) have been used in several fields including, for example, archaeology, cargo transport, conservation, healthcare, filmmaking, hobbies and recreational use. UAVs are aircraft characterized by the absence of a human pilot on board. The extensive use of these devices has highlighted maintenance problems with regard to the propellers, which represent the source of propulsion of the aircraft. A defect in the propellers of a drone can cause the aircraft to fall to the ground and its consequent destruction, and it also constitutes a safety problem for objects and people that are in the range of action of the aircraft. In this study, the measurements of the noise emitted by a UAV were used to build a classification model to detect unbalanced blades in a UAV propeller. To simulate the fault condition, two strips of paper tape were applied to the upper surface of a blade. The paper tape created a substantial modification of the aerodynamics of the blade, and this modification characterized the noise produced by the blade in its rotation. Then, a model based on artificial neural network algorithms was built to detect unbalanced blades in a UAV propeller. This model showed high accuracy (0.9763), indicating a high number of correct detections and suggests the adoption of this tool to verify the operating conditions of a UAV. The test must be performed indoors; from the measurements of the noise produced by the UAV it is possible to identify an imbalance in the propeller blade.

Wind energy is one of the most widely used renewable energy sources in the world and has grown rapidly in recent years. However, the wind towers generate a noise that is perceived as an annoyance by the population living near the wind farms. It is therefore important to new tools that can help wind farm builders and the administrations. In this study, the measurements of the noise emitted by a wind farm and the data recorded by the supervisory control and data acquisition (SCADA) system were used to construct a prediction model. First, acoustic measurements and control system data have been analyzed to characterize the phenomenon. An appropriate number of observations were then extracted, and these data were pre-processed. Subsequently two models of prediction of sound pressure levels were built at the receiver: a model based on multiple linear regression, and a model based on Random Forest algorithm. As predictors wind speeds measured near the wind turbines and the active power of the turbines were selected. Both data were measured by the SCADA system of wind turbines. The model based on the Random Forest algorithm showed high values of the Pearson correlation coefficient (0.981), indicating a high number of correct predictions. This model can be extremely useful, both for the receiver and for the wind farm manager. Through the results of the model it will be possible to establish for which wind speed values the noise produced by wind turbines become dominant. Furthermore, the predictive model can give an overview of the noise produced by the receiver from the system in different operating conditions. Finally, the prediction model does not require the shutdown of the plant, a very expensive procedure due to the consequent loss of production.

Open-plan offices have lower construction costs, allowing for significant savings in space and, according to designers, facilitate communication between workers, thus, improving collaboration, as well as the exchange of ideas. For these reasons, this type of office has become widespread, while highlighting numerous limitations and various problems. These include the control of anthropic and electromechanical noise. In this study, measurements of the noise emitted by a heating, ventilation, and air conditioning (HVAC) system were carried out in an open-plan office. The average spectral levels in a 1/3 octave band were compared through correlation analysis, to identify any redundant data. A model was then adapted to evaluate the importance of the variables, in order to classify the characteristics, by importance. To reduce the number of predictor variables, a selection analysis of the characteristics was carried out. A subset of predictors was extracted to be used to produce an accurate prediction model. Finally, a model based on recursive partitioning, to detect the operating conditions of an HVAC system, was developed and applied, so as to provide insights into the development and application of this technique, in these contexts. The high accuracy of the model (Accuracy = 0.9981) suggests the adoption of this tool for several applications.

In this paper, a typology of a building erected in Ancient Greece and Ancient Rome is described: the Odeon. The Odeon is a covered building, but more modest in size than traditional open-air theatres without roofs. The Odeon could hold a few hundred spectators and therefore a smaller audience. The roof covering allowed the possibility of meetings even in adverse weather conditions. The etymology of the word of the Odeon (covered theatre) means the place of the ode, or of the songs. In this paper are discussed the architectonic and acoustic characteristics of the Odea of Pompeii and Posillipo. With commercial software (Odeon, Room Acoustics Software, Lyngby Denmark) we assess the acoustic characteristics of the Odea of Pompeii and Posillipo in the presence of an original roofing system and show that these buildings were well suited for music, songs and speech.

Giant reeds represent a natural fiber widely available in some areas of the world. Its use can be particularly useful as the uncontrolled growth of giant reeds can be a problem because large areas are invaded by them and the crops are damaged. In this study, two models of numerical simulation of the acoustic behavior of giant reeds were put in comparison: the Hamet model and a model based on artificial neural networks. First, the characteristics of the reeds were examined and the procedures for the preparation of the samples to be analyzed were described. Then air flow resistance, porosity and sound absorption coefficient were measured and analyzed in detail. Finally, the results of the numerical modeling of the acoustic coefficient were compared. The neural network-based model showed high Pearson correlation coefficient value, indicating a large number of correct predictions.