• The quality characteristics of Z. armatum were screened and confirmed. • A standardized evaluation model was established. • It provides reference for Z. armatum quality control and in-depth product processing.

This work evaluated the improvement effects of lipids incorporation on water resistance of composite biodegradable film prepared with wheat bran cellulose/wheat gluten (WBC/WG) using an alkaline–ethanol film forming system. Four types of lipids, paraffin wax (PW), beeswax (BW), paraffin oil (PO), and oleic acid (OA), were tested. We found that PW, BW, and PO incorporation at 5–20% improved water vapor permeability (WVP) and surface hydrophobicity of prepared films. Particularly, incorporation of 15% BW could best improve the water resistance properties of the film, with the lowest WVP of 0.76 × 10⁻¹² g/cm·s·Pa and largest water contact angle (WCA) of 86.18°. Incorporation of OA led to the decline in moisture barrier properties. SEM images revealed that different lipids incorporation changed the morphology and of the composite film, and cross-sectional morphology indicated BW-incorporated film obtained more uniform and compact structures compared to other films. Moreover, Fourier transform infrared spectra indicated that the incorporation of PW or BW enhanced the molecular interactions between the film components, confirmed by the chemical shift of characteristic peaks at 3277 and 1026 cm⁻¹. Differential scanning calorimetry results revealed that incorporation of PW, BW, and PO increased films’ melting point, decomposition temperatures, and enthalpy values. Furthermore, the presence of most lipids decreased tensile strength and elongation at the break of the film. Overall, the composite film containing 15% BW obtained the most promising water resistance performance and acceptable mechanical properties, and it thus most suitable as a hydrophobic biodegradable material for food packaging.

This study aimed to develop a novel pH-sensing biopolymer film based on red cabbage puree (RCP) incorporated with polyvinyl alcohol (PVA), which was utilized for monitoring fish freshness during storage at 25 °C. A homogenized RCP suspension with a mean particle size of 12.86 ± 0.03 μm and a total anthocyanin concentration of 292.17 ± 2.65 mg/L was directly used as a film-forming substance and anthocyanin source to blend with PVA, showing visual changes in color and ultraviolet-visible spectra within a pH of 2–12. Rheological and microstructural studies certified the strong interactions and good compatibility between the RCP and PVA, resulting in better mechanical properties and water resistance of the composite film than those of a pure RCP film, but without affecting its pH sensitivity. When used for fish freshness monitoring at 25 °C, the developed RCP/PVA film presented visible color differences from purple to yellow, which corresponded to the spoilage threshold of the total volatile basic nitrogen and the total viable count in fish samples. The study highlights that anthocyanin-rich purees of fruits and vegetables, in this case red cabbage puree, can be fully utilized to develop eco-friendly pH-sensing indicator films for intelligent food packaging.

Our previous study extracted and identified an antibacterial peptide that was named NP-6. Herein, we investigated the physicochemical properties of NP-6, and elucidated the mechanisms underlying its antimicrobial activity against Staphylococcus aureus. The results showed that the hemolysis activity of NP-6 was 2.39 ± 0.13%, lower than Nisin A (3.91 ± 0.43%) at the same concentration (512 µg/mL). Negligible cytotoxicity towards RAW264.7 cells was found when the concentration of NP-6 was lower than 512 µg/mL. In addition, it could keep most of its activity in fetal bovine serum. Moreover, transmission electron microscopy, confocal laser scanning microscopy, and flow cytometry results showed that NP-6 can destroy the integrity of the bacterial cell membrane and increase the membrane permeability. Meanwhile, NP-6 had binding activity with bacterial DNA and RNA in vitro and strongly inhibited the intracellular β-galactosidase activity of S. aureus. Our findings suggest that NP-6 could be a promising candidate against S. aureus.

Radio frequency (RF) can penetrate most packaging films and has the advantages of pasteurizing prepackaged low-moisture foods and avoiding secondary contamination. The suitable films for prepacking chili powders and the corresponding pasteurization process are unclear. This study aimed to select a suitable film for prepackaging chili powders, optimize the parameters of RF heating prepackaged chili powders, and evaluate the effects of RF-assisted pasteurization on the quality of chili powders. The results showed that the non-woven fabric (NWF) is suitable for prepackaging chili powders by evaluating the influence of RF heating on packaging films (appearance, sealing performance, mechanical properties.). Using NWF, chili powders inoculated with Salmonella enterica Enteritidis PT 30 still achieved 6.81 ± 0.64 log CFU/g reduction, treated by RF heating at an average temperature of 67.06 °C for 7.5 min with an electrode gap of 110 mm, held for 12.5 min at a hot-air convection oven. The pasteurization process had no significant (p > 0.05) effect on the quality (appearance, volatile, and capsaicin) of chili powders. The results indicated that chili powders packed with NWF could still be effectively pasteurized by RF-assisted hot air. This study proposed a viable approach to avoid secondary contamination by adding packaging before pasteurization.