The current study aims to study the drill string–casing system operating in an inviscid fluid under imbalanced and rubbing damage types. The Navier–Stokes equations were linearized to establish the hydrodynamic forces surrounding the drill string and resulted in a five-dimensional system of nonlinear differential equations. To ensure the accurate acquisition of friction characteristics in a fluid medium, a nonlinear wavelet synchronized transform (NWSST) technique was enhanced based on the denoised wavelet hard thresholding algorithm to extract the features of the rubbing system. The developed model was verified through various test conditions, and the extracted data tests show that the frictional impact proves sufficient to modify the dynamic behavior of the drill string throughout the energy concentration with a slight shift above and below the resonant frequency. It was shown by simulation that the vibration of the submerged drill string system potentially enhanced highly undesirable hidden vibrational frequencies that led to a disturbed and chaotic 3D orbit pattern vibrational response. The experimental results show how vibration analysis combined with the synchrosqueezed technique can identify the condition of the drill string system even under harsh operating conditions and demonstrate that fluid enables the drill string system to rotate with minimum friction.
28 December 2020 in International Journal of Rotating Machinery
Mechanical failures of a complex machine such as rotor widely used in severe conditions often require specialized knowledge, technical expertise, and imagination to prevent its rupture. In this paper, a model for analyzing excitation of a coupled lateral-torsional vibrations of a shaft system in an inviscid fluid is proposed. The model considers the recurrent contact of the vibrating shaft to a fixed stator. The simplified mathematical model of the rotor-stator system is established based on the energy principle. The dynamic characteristics of the fluid-rotor system are studied, and the features of rub-impact are extracted numerically and validated experimentally under the effects of the unbalance and the hydrodynamic forces. The main contribution of this article is in extraction and identification of the rub features in an inviscid medium which proved to be complex by the obstruction of the fluid and required the use of appropriate signal processing tools. The results through a synchrosqueezing wavelet transform indicated that the exciting fluid force could significantly attenuate the instability and amplitude of rubbing rotor. The experimental results demonstrated that for half the first critical speed, the subharmonic 1/2x Omega and the irregular orbit patterns provide good indices for rub detection in an inviscid fluid of the rotating shafts. Finally, it is revealed that the instantaneous frequency extraction based on wavelet synchrosqueezing is a useful tool to identify the weak and hidden peak harmonics localised in the time-frequency maps of the fluid-rotor system.
Sectionalized gate valves can reduce the volume of product released in the event of a buried pipeline failure or rupture. The risk of pipeline failure is a constant and common occurrence, and many factors can lead to pipeline incidents. In this paper, the free undamped vibration of the pipeline, sectionalized gate valve structure, and the dynamics of the fluid passing through the system are investigated. First and foremost, a modal analysis based on finite element analysis (FEA) is introduced as a fundamental linear dynamics analysis to provide insight into how a pipeline sectionalized gate valve structure may respond to different types of dynamic loading. Secondly, an implicit numerical analysis using computational fluid dynamics (CFD) is employed to describe physical quantities such as the flow velocity profiles at different stream positions and pressure fields at different points in a control volume. Through modal analysis, the effective mass factor shows the mass involved in each mode and helps identify modes with high potential to cause damage and prioritize efforts to address them. The CFD suggests that the sectionalized design of the gate valve leads to a strong vorticity of the fluid in the transversal direction of the flow and a decrease in efficiency due to pressure drop.
This paper presents a comprehensive analysis of a multi-door check valve using computational fluid dynamics (CFD) and finite element analysis (FEA) to evaluate flow performance under pressure test conditions, with an emphasis on its ability to prevent backflow. Check valves are essential components in various industries, ensuring fluid flow in one direction only while preventing reverse flow. The non-return multi-door reflux valve is increasingly preferred due to its superior backflow prevention, fluid control, and effective flow regulation. Rigorous testing under varying pressure conditions is essential to ensure that these valves perform optimally. This study uses CFD and FEA simulations to evaluate the structural integrity and flow characteristics of the valve, including pressure drop, flow velocity, backflow prevention effectiveness, and flow coefficient. A high-fidelity 3D model was created to simulate the valve’s behavior under various conditions, analyzing the effects of parameters such as the number of doors, their orientation, geometry, and operating conditions. The CFD results demonstrated a significant reduction in backflow and pressure drop across the valve. However, localized turbulence and flow separation near the valve doors, particularly under partially open conditions, have raised concerns about potential wear. The velocity profiles indicated a uniform distribution at full opening with laminar velocity profiles and minimal resistance to flow. The results of the FEA showed that the stresses induced by the fluid forces were below critical levels, with the highest stress concentrations observed around the hinge points of the valve doors. Although the valve structure remained intact under normal operating conditions, some areas may have required reinforcement to ensure long-term durability. Combined CFD and FEA analyses demonstrated that the valve effectively preserves system integrity, prevents backflow, and maintains consistent performance under various pressure and flow conditions. These findings provide valuable insights into design improvements, performance optimization, and enhancing the efficiency and reliability of reflux valve systems in industrial applications.
Two-dimensional linearized Navier-Stokes equations have been used to model the inviscid fluid forces acting on a vertical rotor-cylindrical stator system partially immersed in an inviscid incompressible fluid. The response of the fluid-stator-system subjected to subsequent fault feature extraction. The influences of parameters of the fluid system, among them, fluid density, and mass ratio on the unstable contact zones are analyzed. It is shown that for an effective prediction of rub-impact in a submerged rotor system, the influence of the fluid mass on the stability of the system is an important dynamic factor. It is revealed, that the fluid forces increase the amplitude of vibration, while the frequency of oscillation is reduced, phenomena that stabilise the isotropic vertical rotor-stator system.
Diagnosis of faults in a rotor system operating in a fluid is a complex task in the field of rotating machinery. In an ideal scenario, a forced shutdown due to rotor-stator contact failure would necessitate the replacement of the rotor or stator. However, factors such as time constraints, economic considerations, and the aging of infrastructure make it imprudent to abruptly shut down machinery that can still be safe to operate. The purpose of this paper is to present an experimental study that validates the theoretical results of the dynamic behavior and friction detection using the wavelet synchrosqueezing transformation (WSST) method for recurrent rotor-stator contacts in a fluid environment, as presented in a previous study. The investigation focused on the analysis of whirl orbits, shaft deflection, and fluctuation frequency during passage through critical speeds. The WSST method was used to decompose the dynamic responses of the rotor in the supercritical speed zone into several supercomponents. The variation of the high-frequency component was studied based on the fluctuation of the instantaneous frequency (IF) technique. Additionally, the fast Fourier transform (FFT) method, in conjunction with the WSST technique, was used to calculate the variation in the amplitude of high-order frequencies in the vibration signal spectrum. The experimental study revealed that the split in resonance caused by rubbing effects is reduced when the rotor and stator interact with an inviscid fluid. However, despite the effects of elasticity and fluid boundaries generating self-excitation at low frequencies and uneven motion due to stator clearance, the experimental results were consistent with the theoretical analysis, demonstrating the effectiveness of the contact detection method based on WSST.