New potentional of high-speed water jet technology for renovating concrete structures: The paper discusses the background and results of research focused on the action of a high-speed water jet on concrete with different qualities. The sufficient and careful removal of degraded concrete layers is very important for the renovation of concrete structures. High-speed water jet technology is one of the most common methods used for removing degraded concrete layers. Different types of high-speed water jets were tested in the experimental part. The classical technology of a single continuous water jet generated with one nozzle was tested as well as the technology of revolving water jets generated by multiple nozzles (used mainly for the renovation of larger areas). A continuous flat water jet and pulsating flat water jet were tested the first time, because the connection of a water jet with the acoustic generator of a pulsating jet offers new possibilities for the use of a water jet (see [1] and [2]). A water jet with such a modification is capable of efficient action and can even be used for cutting solid concrete with a relatively low consumption of energy. A flat pulsating water jet which can be newly used for renovation seems to be a promising technology.
25 March 2020 in The International Journal of Advanced Manufacturing Technology
The article deals with an unconventional way of simulating the erosion of concrete surfaces by means of high-speed water flows. The proposed method allows the use of short-term experiments to predict the future failure of concrete elements in specific concrete mixtures exposed in practice to the action of fast-flowing fluids, whether as regards sewers, overfalls of water reservoirs, inlet channels of retention reservoirs, etc. The article shows results of experiments on disintegration of the surface layer of model concrete test specimens of various physical-mechanical properties that were exposed to various types of high-speed water flows. It has been demonstrated that the application of high-speed water flows significantly accelerates the degradation process of the surface layers. This simulation of the real situation can considerably shorten the time needed for the development and testing of new erosion-resistant construction elements.
Virtually every concrete structure comes into contact with abrasive effects of flowing media or solids, which have a direct impact on the durability of concrete. An abrasive effect is most pronounced in transport or water management structures, and these structures are often designed for a significantly longer service life (usually 100 years). This research evaluates the influence of the filler component in terms of the type of aggregate and its mineralogical composition on concrete abrasion resistance. As part of the impact of the binder component, several concrete mixtures were produced using the same aggregate and maintaining the same strength class with the addition of different types of active and inert mineral additives. In other parts of the research, the effect of adding fiber reinforcement on the abrasion resistance of concrete was verified. Mutual connections and correlations in different age groups (7, 28 and 90 days) were sought for all obtained results. The abrasion resistance of the composite was monitored by using standard procedures, especially using a Böhm device. It was found that for good abrasion resistance of concrete, it is not necessary to produce concretes with high strength classes using often expensive mineral additives (microsilica) and quality aggregates, but the maturation time of the composite and its microstructure plays an important role.