To improve the photocathodic protection performance of traditional TiO 2 photoanodes for metals, constructing a Z-scheme heterojunction is one of the most promising and creative strategies. Herein, we fabricated a novel Z-scheme MgIn 2 S 4 nanosheets/TiO 2 nanotube nanocomposite through anodization and hydrothermal method. The optimized Z-scheme MgIn 2 S 4 /TiO 2 nanocomposites exhibited stronger visible light absorption, higher separation efficiency of photoelectrons and photocathodic protection performances in comparison to pure TiO 2 . The theoretical analysis and experimental results show that the Z-scheme heterojunction and oxygen vacancies jointly improved the separation efficiency of photogenerated electron–hole pairs and visible light absorption capacity, thereby improving the photoelectric conversion performance of the MgIn 2 S 4 /TiO 2 nanocomposites. Furthermore, the influence of the precursor solution concentration on the photocathodic protection performances of the composites was investigated. As a result, when the concentration of magnesium source in the precursor solution was 0.06 mmol, the prepared MgIn 2 S 4 /TiO 2 -0.06 displayed the best photocathodic protection performance. In addition, the hydroxyl radicals (·OH) generated in the electron spin resonance (ESR) experiment verified the Z-scheme heterojunction mechanism of the MgIn 2 S 4 /TiO 2 composite, and also demonstrated the excellent redox performance of the composite. This work provides valuable reference for the construction of high-performance Z-scheme heterojunctions for photocathode protection of metals.
A novel In2S3/Ag2S/TiO2 nanotube arrays (NTAs) was successfully fabricated by successive ionic layer adsorption and reaction method and electrochemical anodic oxidation method, and served as photoanode for photocathodic protection application. The micromorphologies, optical absorption properties, crystalline structure and elemental valence states of the composites were performed by field emission scanning electron microscopy, high resolution transmission electron microscope, UV–vis diffuse reflectance absorption spectra, x-ray diffractometer and x-ray photoelectron spectroscopy, respectively. The photocathodic protection performances of In2S3/Ag2S/TiO2 NTAs on the Q235 carbon steel (CS) were also studied. The In2S3/Ag2S/TiO2 nanocomposites show better photoelectrocatalytic and photocathodic protection performance than pure TiO2 NTAs. The photocurrent density of In2S3(9)/Ag2S(8)/TiO2 photoelectrode coupled with Q235 CS reach 211 μA cm−2, which is about 4.5 times higher than that of TiO2 NTAs. The photogenerated potential of Q235 CS coupled to In2S3(9)/Ag2S(8)/TiO2 under illumination shows a negative shift to −0.92 V versus SCE. Results indicate that the co-sensitization of In2S3 and Ag2S could extend the light absorption of TiO2 to the visible light range and enhance its photoelectric conversion efficiency.