Among many other sustainable functional nanomaterials, nanocellulose is drawing increasing interest for use in environmental remediation technologies due to its numerous unique properties and functionalities. Nanocellulose is usually derived from the disintegration of naturally occurring polymers or produced by the action of bacteria. In this review, some invigorating perspectives on the challenges, future direction, and updates on the most relevant uses of nanocellulose in environmental remediation are discussed. The reported applications and properties of nanocellulose as an adsorbent, photocatalyst, flocculant, and membrane are reviewed in particular. However, additional effort will be required to implement and commercialize nanocellulose as a viable nanomaterial for remediation technologies. In this regard, the main challenges and limitations in working with nanocellulose-based materials are identified in an effort to improve the development and efficient use of nanocellulose in environmental remediation.
In this study, 3 wt% Fe-doped TiO2 particles were prepared by sol-gel method using tetrabutyl titanate and iron (III) nitrate nonahydrate as precursors. Calcination of the prepared samples was carried out at temperature of 200, 400, 600 and 800 °C for 2 h. The effect of calcination temperature on the composition, structure and morphology of Fe-doped TiO2 were characterized using Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Spectroscope (EDX) and X-ray Diffractometer (XRD). The FESEM images revealed changes in particle size from 34 to 148 nm for samples calcined at 200 to 800 °C, respectively. Meanwhile, XRD results demonstrated the presence of rutile phase in catalysts which were calcined above 600 °C. Sonophotocatalytic degradation of paracetamol using ultraviolet (UV) light and ultrasonic irradiation was performed to investigate the influence of calcination temperature on the catalytic activity of Fe-doped TiO2. Among all the calcined catalysts, the Fe-doped TiO2-600 achieved the highest degradation efficiency (74%) due to the presence of mixed anatase and rutile phases. This proved that calcination temperature is a critical parameter which affects the characteristics and catalytic activity of Fe-doped TiO2 catalyst in the sonophoto-degradation process.