Dawei Wang

Dawei Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2023 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
YMYingjie Mei
Yingjie Mei
LYLIU Yongmeng
LIU Yongmeng
JLJiahao Li
Jiahao Li
HWHuilin Wu
Huilin Wu
CSChuanzhi 传志 Sun
Chuanzhi 传志 Sun
JTJiubin Tan
Jiubin Tan
Precise measurement is the basis for the precise assembly of aeroengine rotors. However, due to the limitations of data application in the measurement process and the insufficient digitization of auxiliary assembly, the guided assembly after precise measurement heavily relies on manual analysis and operation. Moreover, due to the difficulty of fully utilizing measurement data of aeroengine rotors to guide assembly in existing assembly methods, it is hard to unify measurement and assembly processes, which limits the efficiency of aeroengine rotors assembly. According to the real-time response and high-fidelity interaction capability of the digital twin (DT) system, a coaxiality prediction model of aeroengine multistage rotors assembly and a cloud-based measurement data rapid interaction are established. Based on the large coaxiality measuring instrument, a DT system with measurement and real-time guidance for assembly is designed. Augmented reality device is used as the “sixth dimension” of the DT system to realize the digital measurement and assembly of aeroengine rotors. The experiment uses a certain type of engine three-stage rotors for measurement and assembly. The experimental results show that the large-scale coaxiality measuring instrument DT system can carry out accurate measurement and real-time assembly guidance for the engine, and achieve breakthroughs in engine assembly quality in multiple metrics, which significantly broadens the application dimension of precision measuring instruments.

15 May 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ZLZhengkun Li Li
Zhengkun Li Li
YBYang Bai
Yang Bai
YWYue Wang
Yue Wang
DWDawei Wang
Dawei Wang
YLYunfeng Lu
Yunfeng Lu
JTJiubin Tan
Jiubin Tan
The joule balance, which relates the mechanical energy and the electrical energy, was proposed by National Institute of Metrology (NIM) to measure the Planck constant and realize the kilogram with the Planck constant based on the new definition of the kilogram. In 2019, the NIM-2 joule balance participated in the first key comparison of kilogram realizations (CCM.M-K8.2019) with a combined relative standard uncertainty of 4.5×10 -8 . After the first key comparison, a series of improvements on the mechanical, electrical, and the alignment systems have been carried out. To improve the accuracy of the electrical measurement, the periodical calibration of the digital voltmeter (DVM) with the Programmable Josephson Voltage System (PJVS) was also realized. The calibration period of the DVM was reduced from 5 days to 3.5 hours. With these improvements, the corresponding uncertainties were decreased significantly.

11 July 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
MZMaowei Zhang
Maowei Zhang
LYLIU Yongmeng
LIU Yongmeng
RLRuirui Li
Ruirui Li
DWDawei Wang
Dawei Wang
JTJiubin Tan
Jiubin Tan
Perpendicularity is an orientation tolerance, and the perpendicularity of end face can be used to assess the axial assembly precision of multistage rotor. The aim of this article is to detect the perpendicularity and parallelism of rotor using turntable-rotating approach. The misalignment between the datum system of the rotor and the measurement datum of the turntable will introduce the datum error, which is difficult to be thoroughly eliminated by the mechanical device of centering and leveling. To ensure that each measurement is carried out in the same datum system of rotor, the residual error of tilt and eccentricity between two datum systems is studied and compensated. The direction of assessment datum axis of rotor perpendicularity is determined by the rotor axis rather than extrinsic measurement datum, e.g., turntable axis. The experiment of rotor is performed to verify the effectiveness of the presented detection approach. The difference and relationship between rotor perpendicularity and parallelism are investigated and discussed. It is recommended that parallelism and perpendicularity should be considered together to fully reflect the axial geometric tolerance of rotor. The presented approach is general, which can also be conveniently used to detect axial geometric tolerances of other rotating components, for example, compressor rotor, motor rotor, and gas turbine rotor.

10 February 2022 in Symmetry
Verified
Journal Article
Open access
PDF file
LYLIU Yongmeng
LIU Yongmeng
ZCZifei Cao
Zifei Cao
YZYuan Zhang
Yuan Zhang
DWDawei Wang
Dawei Wang
XWXiaoming Wang
Xiaoming Wang
CSChuanzhi 传志 Sun
Chuanzhi 传志 Sun
Due to the advantages of high rotation accuracy and long life, hydrostatic air bearings are widely used in precision rotation equipment, such as machine tools and turntables. It is imperative to reasonably design the structural size of the bearing, especially as the size of the bearing in the precision turntable determines the bearing capacity of the turntable. At present, commercial CFD software is used chiefly for simulation verification for the design of air bearings. The mesh divided in the simulation calculation has a significant impact on the efficiency of the calculation and determines the accuracy of the final simulation results. Therefore, this paper takes the symmetrical multi-throttle thrust bearing in the precision turntable as the research object and compares and studies the advantages and disadvantages of sliced structured meshes, continuous structured meshes, and unstructured meshes. On this basis, simulation analysis of bearing capacity for different radial equalizing groove lengths, widths, and depths and explores the influence of the structure size of the thrust bearing on its bearing capacity. The study shows that the length and depth of the throttle groove significantly influence the bearing capacity, while the width has little influence on the bearing capacity. Therefore, under the specific cavity volume to ensure the dynamic characteristics of the bearing, the width of the throttling groove should be reduced first, and the length and depth of the throttling groove should be increased to improve the bearing capacity.

3 June 2026 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JLJiajun Lin
Jiajun Lin
DWDawei Wang
Dawei Wang
XZXudong Zhao
Xudong Zhao
YBYang Bai
Yang Bai
YWYue Wang
Yue Wang
JTJiubin Tan
Jiubin Tan
The joule balance, a high-accuracy electromechanical instrument originally developed in China, provides an alternative approach for realizing the kilogram via the Planck constant h. To improve the dissemination, robustness, and cost-effectiveness of this technique, a compact tabletop system operating at the kilogram-level has been developed jointly by Harbin Institute of Technology (HIT) and the National Institute of Metrology (NIM). This paper briefly introduces the preliminary design of a tabletop joule balance following the Kibble-Robinson theory (KRT). Strictly one-dimensional and long-range motion is achieved by using a vacuum-compatible aerostatic linear guide, which provides near-zero friction and high directional stability. Comparison between gravitational and electromagnetic force is accomplished via elastic deformation measurement using an ortho-planar spring. A basic experimental setup was built to investigate the structural feasibility.Experimental results indicate that the proposed force null detector achieved a measurement resolution of 0.24 mg in mass comparison. While the current resolution is limited by the laboratory environment and electrical noise, and has not yet met the ultimate design target of the joule balance, the experiments have preliminarily validated the feasibility of the proposed mechanical architecture. This work establishes a solid hardware foundation for subsequent system optimizations to achieve higher measurement accuracy.