Anna Kamenskikh

Dr. Anna Kamenskikh

Perm National Research Polytechnic University
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
AKAnna Kamenskikh
Anna Kamenskikh
KMKarim R. Muratov
Karim R. Muratov
ESEvgeniy Shlykov
Evgeniy Shlykov
SSSarabjeet Singh Sidhu
Sarabjeet Singh Sidhu
Amit MahajanAmit Mahajan
Amit Mahajan
ATAblyaz Timir
Ablyaz Timir
Electrical discharge machining (EDM) is a highly precise technology that not only facilitates the machining of components into desired shapes but also enables the alteration of the physical and chemical properties of workpieces. The complexity of the process is due to a number of regulating factors such as the material of the workpiece and tools, dielectric medium, and other process parameters. Based on the material type, electrode shape, and process configuration, various shapes and degrees of accuracy can be generated. The study of erosion is based on research into processing techniques, which are the primary tools for using EDM. Empirical knowledge with subsequent optimization of technological parameters is one of the ways to obtain the required surface quality of the workpiece with defect minimization, as well as mathematical and numerical modeling of the EDM process. This article critically examines all key aspects of EDM, reflecting both the early foundations of electrical erosion and the current state of the industry, noting the current trends towards the transition of EDM to the 5.0 industry zone in terms of safety and minimizing the impact of the process on the environment.

1 March 2015 in Journal of Friction and Wear
Verified
Journal Article
Closed access
PDF file
AKAnna Kamenskikh
Anna Kamenskikh
NTN. A. Trufanov
N. A. Trufanov
A finite-element study of the interaction between the elements of a spherical contact unit with an antifriction polymeric interlayer in full three-dimensional statement is reviewed. The mathematical problem of the contact interaction of elastic bodies through the antifriction interlayer is formulated taking into consideration all contact statuses, i.e., sticking, slipping, and the separation of contact surfaces. A finite-element model of a design bearing with the spherical segment and the influence of operational loads upon its contact interaction is considered. The regularities of contact parameters distribution at action of operational loadings are revealed and integrated power reactions of the contact unit arising in the top plate at the joint action of vertical pressure and shift loading on spherical bearing are established.

28 October 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
YNYuriy Nosov
Yuriy Nosov
AKAnna Kamenskikh
Anna Kamenskikh
The load on transport and logistics systems is increasing every year. This is due to car park growth around the world. Thus, increasing bridge structure durability is an urgent task for bridge-building companies. This study analyses the contact deformation of spherical bearing elements through an anti-friction polymer layer with different geometrical configurations of recesses for the lubricant, i.e., annular grooves and spherical holes. The material of the anti-friction layer (a modified polytetrafluoroethylene (PTFE)) is modelled within the framework of the deformation theory of plasticity. The procedure of automating the numerical model construction depends on the input parameters, including the thickness of the layer, the basic geometrical parameters of the recesses for the lubricant, and the distance between the rows of recesses, etc. The influence of the arrangement of filling sliding anti-friction layers on recesses for lubricants in the form of spherical holes on the contact deformation behaviour of bridge bearings has been considered. The reduction of lubricant volume in the sliding anti-friction layer with the geometry of recesses in the form of spherical holes ranges from 26 to 48.4%, depending on the filling scheme, has been found. In this case, structures with lubrication recesses in the form of spherical holes have several advantages, including a more uniform distribution of contact parameters in the interface areas of the steel plates with the anti-friction layer, reduction of the maximum level of the plastic deformation intensity, displacements along the normal relative to the free end of the sliding layer, and the settlement of the bearing.

15 July 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
YNYuriy Nosov
Yuriy Nosov
AKAnna Kamenskikh
Anna Kamenskikh
The study of the rheological properties of a lubricant allows for the assessment of the structure’s durability in which they are used. Computer engineering enables the prediction of the structure performance using refined mathematical models of its materials. This paper presents an experimental investigation of the rheological behavior of a lubricant that is actively used in bridge structures. The paper proposed a methodology for determining the rheological characteristics of the lubricant using a rotational viscometer. Additionally, the article performed the task of identifying the mathematical model of the lubricant behavior based on the Maxwell body, using two approaches: the Anand model and the Prony series. The proposed models allow for numerical modeling of the structure’s performance throughout their lifecycle within the scope of computer engineering.

18 February 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
AAAnatoliy A. Adamov
Anatoliy A. Adamov
AKAnna Kamenskikh
Anna Kamenskikh
ABAnastasia Petrovna Bogdanova
Anastasia Petrovna Bogdanova
Bearings are the supporting elements of bridges. They perceive vertical and horizontal loads from the bridge span. Spherical bearings are one of the construction common types. The material and configuration of the anti-friction layers determine the bearing performance. The paper performed the contact deformation analysis of spherical bearing elements at a nominal vertical load of 1000 kN. The six types of the spherical sliding layer material are considered: ultra-high molecular weight polyethylene (UHMWPE) from three different manufacturers, modified polytetrafluoroethylene (PTFE), and composite materials by PTFE with two different forms of reinforcing bronze inclusions. Young’s modulus, Poisson’s ratio, and strain curve are obtained experimentally for spherical sliding layer materials. Paper considered the influence of the sliding layer material on the contact parameters and deformation characteristics of the structure with a standard interlayer thickness by 4 mm. Research observed significant the composite interlayer deformation and the appearance of “no contact” zones on the mating surfaces. The option of increasing the sliding layer thickness up to 6–8 mm is considered. A decrease is observed in the maximum level of contact parameters by increase of the sliding layer thickness. The influence of the anti-friction layer materials becomes insignificant on the bearing deformation with an increase of the spherical sliding layer thickness.

29 August 2022 in Lubricants
Verified
Journal Article
Open access
PDF file
AAAnatoliy A. Adamov
Anatoliy A. Adamov
AKAnna Kamenskikh
Anna Kamenskikh
ABAnastasia Petrovna Bogdanova
Anastasia Petrovna Bogdanova
VSVeronika I. Strukova
Veronika I. Strukova
The novel results reported here present qualitative and quantitative regularities of the deformation behavior of a spherical bearing with a different location and inclination angle of the antifriction layer. A number of topical problems encountered during the assessment of the performance bearings are considered in the work. The spherical bearings of the bridge span are investigated. Structures are load-bearing elements of transport systems. They perceive thermal power loads from the bridge span. The temperature problem is not considered in this study. In this paper, a comparative analysis of the bridge spherical bearing operation at different antifriction layer locations was performed. Two bearing geometries are considered: the interlayer is pressed in a spherical segment (classical geometry); the interlayer is pressed into a recess located in the lower steel plate. The six modern antifriction materials considered proved suitable to some extent as contact unit sliding layers for various purposes. Additionally, the influence of the inclination angle of the antifriction layer end face on the structure operation for all sliding layer material variants was analyzed. It has been established that the bearing design with an interlayer in the lower steel plate has a more favorable deformation behavior. Changing of the inclination angle of the antifriction layer end face leads to a decrease in the maximum level of contact parameters and deformation characteristics for all the considered structures.