This letter presents the design, fabrication, and demonstration of a CMOS/microelectromechanical system (MEMS) electrostatically self-excited resonator based on a submicrometer-scale cantilever with ~1 ag/Hz mass sensitivity. The mechanical resonator is the frequency-determining element of an oscillator circuit monolithically integrated and implemented in a commercial 0.35 mum CMOS process. The oscillator is based on a Pierce topology adapted for the MEMS resonator that presents a mechanical resonance frequency of ~6 MHz, a relative low quality factor of 100, and a large motional resistance of ~25 M. The MEMS oscillator has a frequency stability of ~1.6 Hz resulting in a mass resolution of ~1 ag (1 ag = 10^-18 g in air conditions.

In this paper, we report on the main aspects of the design, fabrication, and performance of a microelectromechanical system constituted by a mechanical submicrometer scale resonator (cantilever) and the readout circuitry used for monitoring its oscillation through the detection of the capacitive current. The CMOS circuitry is monolithically integrated with the mechanical resonator by a technology that allows the combination of standard CMOS processes and novel nanofabrication methods. The integrated system constitutes an example of a submicroelectromechanical system to be used as a cantilever-based mass sensor with both a high sensitivity and a high spatial resolution (on the order of 10/sup -18/ g and 300 nm, respectively). Experimental results on the electrical characterization of the resonance curve of the cantilever through the integrated CMOS readout circuit are shown.

Monolithic mass sensors for ultrasensitive mass detection in air conditions have been fabricated using a conventional $0.35\mu \mathrm{m}$ complementary metal-oxide-semiconductor (CMOS) process. The mass sensors are based on electrostatically excited submicrometer scale cantilevers integrated with CMOS electronics. The devices have been calibrated obtaining an experimental sensitivity of $6\times {10}^{-11}\mathrm{g}∕{\mathrm{cm}}^2\mathrm{Hz}$ equivalent to $0.9\mathrm{ag}∕\mathrm{Hz}$ for locally deposited mass. Results from time-resolved mass measurements are also presented. An evaluation of the mass resolution have been performed obtaining a value of $2.4\times {10}^{-17}\mathrm{g}$ in air conditions, resulting in an improvement of these devices from previous works in terms of sensitivity, resolution, and fabrication process complexity.