Surface albedo plays a controlling role in the surface energy budget, and albedo-induced radiative forcing has a significant impact on climate and environmental change (e.g., global warming, snow and ice melt, soil and vegetation degradation, and urban heat islands (UHIs)). Several existing review papers have summarized the algorithms and products of surface albedo as well as climate feedback at certain surfaces, while an overall understanding of various land types remains insufficient, especially with increasing studies on albedo management methods regarding mitigating global warming in recent years. In this paper, we present a comprehensive literature review on the variance pattern of surface albedo, the subsequent climate impact, and albedo management strategies. The results show that using the more specific term “surface albedo” is recommended instead of “albedo” to avoid confusion with similar terms (e.g., planetary albedo), and spatiotemporal changes in surface albedo can indicate subtle changes in the energy budget, land cover, and even the specific surface structure. In addition, the close relationships between surface albedo change and climate feedback emphasize the important role of albedo in climate simulation and forecasting, and many albedo management strategies (e.g., the use of retroreflective materials (RRMs)) have been demonstrated to be effective for climate mitigation by offsetting CO₂ emissions. In future work, climate effects and management strategies regarding surface albedo at a multitude of spatiotemporal resolutions need to be systematically evaluated to promote its application in climate mitigation, where a life cycle assessment (LCA) method considering both climate benefits and side effects (e.g., thermal comfort) should be followed.

Accurate estimation of forest aboveground biomass (AGB) is vital for informing ecosystem and carbon management. The Global Ecosystem Dynamics Investigation (GEDI) instrument—a new-generation spaceborne lidar system from NASA—provides the first global coverage of high-resolution 3D altimetry data aimed specifically for mapping Earth’s forests, but its performance is yet to be tested for large parts of the world. Here, our goal is to evaluate the accuracies of GEDI in measuring terrain, forest vertical structures, and AGB in reference to independent airborne lidar data over temperate and tropical forests in North America. We compared GEDI-derived elevations and canopy heights (e.g., relative height percentiles such as RH50 and RH100) with those from the Shuttle Radar Topography Mission (SRTM) or from two airborne lidar systems: the Laser Vegetation Imaging Sensor (LVIS) and Goddard’s Lidar, Hyperspectral and Thermal system (G-LiHT). We also estimated GEDI’s geolocation errors by matching GEDI waveforms and G-LiHT pseudo-waveforms. We assessed the predictive power of GEDI metrics in estimating AGB using Random Forests regression. Results showed that GEDI-derived ground elevations correlated strongly those from LVIS, G-LiHT, and LVIS (R² > 0.91), but with nonnegligible RMSEs of 5.7 m (G-LiHT), 3.1 m (LVIS), and 10.9 m (SRTM). GEDI canopy heights had poorer correlation with LVIS (e.g., R² = 0.44 for RH100) than with G-LiHT (e.g., R² = 0.60 for RH100). The estimated horizontal geolocation errors of GEDI footprints averaged 6.5 meters, comparable to the nominal accuracy of 9 m. Correction for the locational errors improved the correlation of GEDI vs G-LiHT canopy heights significantly, on average by 53% (e.g., R² from 0.57 to 0.82 for RH50). GEDI canopy metrics were useful for predicting AGB (R² = 0.82 and RMSE = 19.1 Mg/Ha), with the maximum canopy height RH100 being the most useful predictor. Our results highlight the importance of accommodating or correcting for GEDI geolocation errors for estimating forest characteristics and provide empirical evidence on the utility of GEDI for monitoring global biomass dynamics from space.

In close-range or unmanned aerial vehicle (UAV) photogrammetry, Schneider concentric circular coded targets (SCTs), which are public, are widely used for image matching and as ground control points. GSI point-distributed coded targets (GCTs), which are only mainly applied in a video-simultaneous triangulation and resection system (V-STARS), are non-public and rarely applied in UAV photogrammetry. In this paper, we present our innovative detailed solution to identify GCTs. First, we analyze the structure of a GCT. Then, a special 2D P²-invariant of five coplanar points derived from cross ratios is adopted in template point registration and identification. Finally, the affine transformation is used for decoding. Experiments indoors—including different viewing angles ranging from 0° to 80° based on 6 mm-diameter GCTs, smaller 3 mm-diameter GCTs, and different sizes mixed—and outdoors with challenging scenes were carried out. Compared with V-STARS, the results show that the proposed method can preserve the robustness and achieves a high accuracy rate in identification when the viewing angle is not larger than 65° through indoor experiments, and the proposed method can achieve approximate or slightly weaker effectiveness than V-STARS on the whole. Finally, we attempted to extend and apply the designed GCTs in UAV photogrammetry for a preliminary experiment. This paper demonstrates that GCTs can be designed, printed, and identified easily through our method. It is expected that the proposed method may be helpful when applied to image matching, camera calibration, camera orientation, or 3D measurements or serving as control points in UAV photogrammetry for scenarios with complex structures in the future.

To improve our capacity to map long-term vegetation dynamics in heterogeneous landscapes, this study proposed a new prior knowledge-based spatiotemporal enhancement method, namely, PK-STEM, to fuse MODIS and Landsat FPAR products following the remote sensing trend surface framework. PK-STEM uses historical Landsat FPAR images as prior knowledge and fuses them with new satellite-derived FPAR data. PK-STEM can work in three modes: 1) using only MODIS data; 2) using only Landsat data; and 3) using both MODIS and Landsat data. This study retrieved FPAR from Landsat images using a scaling-based method and tested the performance of PK-STEM in a regional application. For the entire year of 2012, we compared the performance of PK-STEM in different modes and with that of two typical spatiotemporal fusion methods, the enhanced spatial and temporal adaptive reflectance model (ESTARFM) and unmixing-based linear mixing growth model (LMGM). Then, a long time series FPAR data set at 30-m resolution and eight-day intervals was generated for 13 years (2000–2012). Our results show that PK-STEM in mode III is the most robust and accurate (root mean squared error (RMSE) = 0.062; mean $R = 0.851$ ) among the three modes and more accurate than ESTARFM (mean RMSE = 0.065; mean $R = 0.776$ ) and LMGM (mean RMSE = 0.074; mean $R = 0.734$ ). For the 12 years (2000–2011), PK-STEM also achieves high accuracies with mean RMSE = 0.066 and $R = 0.938$ . PK-STEM is very flexible with a continual update mechanism and is efficient for long time series applications.

Recently, much attention has been given to using geostationary Earth orbit (GEO) meteorological satellite data for retrieving land surface parameters due to their high observation frequencies. However, their bidirectional reflectance distribution function (BRDF) information content with a single viewing angle has not been sufficiently investigated, which lays a foundation for subsequent quantitative estimation. In this study, we aim to comprehensively evaluate BRDF information from time-series observations from the Advanced Himawari Imager (AHI) onboard the GEO satellite Himawari-8. First, ~6.2 km monthly multiangle surface reflectances from POLDER onboard a low-Earth-orbiting (LEO) satellite with good angle distributions over various land types during 2008 were used as reference data, and corresponding 0.05° high-quality MODIS (i.e., onboard LEO satellites) and AHI datasets during four months in 2020 were obtained using cloud and aerosol property products. Then, indicators of angle distribution, BRDF change, and albedos were retrieved by the kernel-driven Ross-Li BRDF model from the three datasets, which were used for comparisons over different time spans. Generally, the quality of sun-viewing geometries varies dramatically for accumulated AHI observations according to the weight-of-determination, and wide-ranging anisotropic flat indices are obtained. The root-mean-square-errors of white sky albedos between AHI and MODIS half-month data are 0.018 and 0.033 in the red and near-infrared bands, respectively, achieving smaller values of 0.004 and 0.007 between the half-month and daily AHI data, respectively, due to small variances in sun-viewing geometries. The generally wide AHI BRDF variances and good consistency in albedo with MODIS show their potential for retrieving anisotropy information and albedo, while angle accumulation quality of AHI time-series observations must be considered.