This article aims to propose an algorithm for the automatic recognition of selected radar signals. The algorithm can find application in areas such as Electronic Warfare (EW), where automatic recognition of the type of intra-pulse modulation or the type of emitter operation mode can aid the decision-making process. The simulations carried out included the analysis of the classification possibilities of linear frequency modulated pulsed waveform (LFMPW), stepped frequency modulated pulsed waveform (SFMPW), phase coded pulsed waveform (PCPW), rectangular pulsed waveforms (RPW), frequency modulated continuous wave (FMCW), continuous wave (CW), Stepped Frequency Continuous Wave SFCW) and Phase Coded Continuous Waveform (PCCW). The algorithm proposed in this paper is based on the use of continuous wavelet transform (CWT) coefficients and higher-order statistics (HOS) in the feature determination of selected signals. The Principal Component Analysis (PCA) method was used for dimensionality reduction. An artificial neural network was then used as a classifier. Simulation studies took into account the presence of noise interference with signal-to-noise ratio (SNR) in the range from −5 to 10 dB. Finally, the obtained classification efficiency is presented in the form of a confusion matrix. The simulation results show a high recognition test accuracy, above 99% with a signal-to-noise ratio greater than 0 dB. The article also deals with the selection of the type and parameters of the wavelet. The authors also point to the problems encountered during the research and examples of how to solve them.

Automatic recognition of the signal modulation type turned out to be useful in many areas, including electronic warfare or surveillance. The wavelet transform is an effective way to extract signal features for identification purposes. In this paper there are M-ary ASK, M-ary PSK, M-ary FSK, M-ary QAM, OOK and MSK signals analysed. The mean value, variance and central moments up to five of continuous wavelet transform (CWT) are used as signal features. The principal component analysis (PCA) is applied to reduce a number of features. A multi-layer neural network trained with backpropagation learning algorithm is considered as a classifier. There are two research variants: interclass and intraclass recognition with a wide range of signal-to-noise ratio (SNR).

This article analyses the possibility of using the Analytic Wavelet Transform (AWT) and the Convolutional Neural Network (CNN) for the purpose of recognizing the intrapulse modulation of radar signals. Firstly, the possibilities of using AWT by the algorithms of automatic signal recognition are discussed. Then, the research focuses on the influence of the parameters of the generalized Morse wavelet on the classification accuracy. The paper’s novelty is also related to the use of the generalized Morse wavelet (GMW) as a superfamily of analytical wavelets with a Convolutional Neural Network (CNN) as classifier applied for intrapulse recognition purposes. GWT is used to obtain time–frequency images (TFI), and SqueezeNet was chosen as the CNN classifier. The article takes into account selected types of intrapulse modulation, namely linear frequency modulation (LFM) and the following types of phase-coded waveform (PCW): Frank, Barker, P1, P2, and Px. The authors also consider the possibility of using other time–frequency transformations such as Short-Time Fourier Transform(STFT) or Wigner–Ville Distribution (WVD). Finally, authors present the results of the simulation tests carried out in the Matlab environment, taking into account the signal-to-noise ratio (SNR) in the range from −6 to 0 dB.

Automatic signal recognition algorithms turned out to be useful in many areas including intelligent radio, electronic warfare or surveillance systems. There are various new signals and the emitter recognition is a key problem in rapidly changing electromagnetic environment.Using continuous wavelet transform (CWT) turns out to be effective way to extract signal/modulation features for classification purposes. In this paper the recognition possibilities of selected types of radar signals, like linear and stepped frequency modulated signals (LFM, SFM), phase coded waveforms (PCW) with Barker code and rectangular pulses (Rec), are analysed. Two kinds of algorithms are considered. In the first one higher order statistics (HOS) of continuous wavelet transform (CWT) coefficients are proposed as signal features. Principal component analysis (PCA) is considered to reduce number of features and feed-forward neural network is proposed as classifier. In the second one CWT coefficients are treated as an image and the classification process is carried out using a convolutional neural network (CNN). For evaluating the performance of the simulated (in Matlab environment) classification models a confusion matrix is used.

Method of moments is one of the most useful approaches for radar cross‐section (RCS) simulation, allowing, that is, the computation of the scattering of real objects from 3D models. However, it is limited by computer memory and computation time. In this paper, the authors explore the question of the balance between the possible acceptable level of 3D model simplification and the time benefit associated with a decrease in computational overhead due to the reduction of the model geometry complexity. A spatial volume‐based RCS characterisation quality index is proposed to help determine the level of simplification to achieve a significant reduction in computation time while maintaining an acceptable level of similarity. The authors present the results of the calculations performed for perfectly conducted sphere 3D models with varying levels of geometry simplification for which a simple analytical solution exists. Furthermore, the results of the computations performed for a generic missile model set are shown. Possible areas of the application of the proposed approach are also considered.

This research presents findings from laboratory experiments on a novel method for identifying and differentiating objects using radar signatures and a specialized convolutional neural network architecture. Previously introduced by the authors, this method has been validated through real-world measurements in an urban environment with a 24 GHz frequency-modulated continuous-wave radar. This study describes how radar signatures, generated in the MATLAB (R2023b) environment from I and Q signals captured by the uRAD USB v1.2 radar, were processed. A database of radar signatures for pedestrians, cyclists, and vehicles was created, and a tailored convolutional neural network was trained. The developed solution achieves an accuracy of over 95% in distinguishing between various objects. The simulation results and successful tests support the application of this system across various sectors. The key innovations include distinguishing multiple objects from a single radar signature, a custom architecture for the convolutional neural network, and an application that processes radar data to produce near-real-time recognition results.