To investigate the deformation-failure process of Longmaxi shale under uniaxial compression conditions from the mesoscopic and macroscopic points of view, novel X-ray microComputed Tomography (micro-CT) equipment combined with unique loading apparatus was used. Cylindrical shale samples (4 mm in diameter and 8 mm in height) were produced to perform a series of uniaxial compression tests. CT scanning images at different time points during the loading process were obtained to study the characteristics of the progressive failure. In addition, stereograms were reconstructed and vertical slices were selected to explain the failure mechanism. From the results of the testing the low-density area, local per-peak cracks, numerous post-peak cracks and secondary cracks consecutively appeared in the CT images. Vertical and inclined fissures in the samples could be observed from the stereograms’ surfaces and from internal slices. The cracking indicates that the failure process of shale is progressive and the failure mechanism of shale under uniaxial compression is mainly tension destruction or comprehensive tension-shear destruction.

The depressurization and backfilling with an in situ supplemental heat method had been proposed to enhance the gas production of methane hydrate reservoir. This novel method is evaluated by a numerical simulator based on the finite volume method in this work. Based on the typical marine low-permeability hydrate-bearing sediments (HBS), a reservoir model with gas fracturing and CaO powder injection is constructed. The simulation results show that the stimulated fractures could effectively enhance the pressure drop effect. Moreover, the CaO injection could provide in situ heat simultaneously. Based on the sensitivity analysis of the equivalent permeability of fractures and the mass of CaO injection, it is found that a threshold fracture permeability exists for the increasing of gas production. The gas production increases with the equivalent permeability only when the permeability is smaller than the threshold value. Meanwhile, the more CaO are injected into reservoir, the larger volume of gas production. In general, this work theoretically quantifies the potential value of the depressurization and backfilling with an in situ supplemental heat method for marine gas hydrate recovery.