The present study aimed to improve the optical sensing performance of tapered optical fiber sensors toward aqueous Rhodamine B solution of different concentrations by applying single-walled carbon nanotubes (SWCNTs). The functional coating was formed on the surface of the tapered optical fiber sensor using an aerosol layer-by-layer deposition method. Before deposition, the SWCNTs were processed with multistage liquid-phase treatment in order to form a stable dispersion. The effect of SWCNT treatment was investigated through Raman spectroscopy. The deposition of 220 layers caused a reduction of up to 60% of the initial optical power of radiation propagating through the optical fiber core. The optical fiber sensor coated with SWCNTs demonstrated significantly higher sensitivity compared to a non-coated sensor in the range of 2–32 mg/L of Rhodamine B concentration in an aqueous solution. The experimental results demonstrated that the sensitivity was increased 10 times from 32 (mg/L)⁻¹, for the non-coated sensor, up to 317 (mg/L)⁻¹ after SWCNT coating deposition. Moreover, the SWCNT-coated sensor demonstrated high repeatability that allowed for the evaluation of the concentration regardless of the previously analyzed dye concentration.

A light-receiving device prototype based on the semiconductor–carbon nanotubes (CNTs) structure consisting of 16 cellular structured sensitive elements grown on the same substrate is developed. The topology of sensitive cells represents holes through metallization and insulator layers to the semiconductor from which the CNT array grows to the top metallization layer. The device prototype parameters are determined as follows: the effective wavelength range is within 400–1100 nm, the operational speed is no longer than 30 μs, the coefficients of peak sensitivity reached at wavelengths of 640 and 950 nm are 197 and 193 μA/W, respectively.