Yaoxian Zheng

Dr. Yaoxian Zheng

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 February 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YZYaoxian Zheng
Yaoxian Zheng
QWQiong Wang
Qiong Wang
MLMI LIN
MI LIN
Zhengbiao OuyangZhengbiao Ouyang
Zhengbiao Ouyang
Hyperbolic metamaterials (HMMs) exhibit high tunability in photonic devices. This study numerically investigates light propagation in photonic crystal (PhC) membranes containing HMMs. The proposed HMM PhC membranes contain square HMM rods, which comprise dielectric (Si) and metallic (Ag) layers. Owing to their property of subwavelength field localization, HMMs can be applied to PhCs to improve tunability and thus enhance the self-collimation (SC) effect of PhCs. The SC points were obtained in the second HMM PhC band, wherein the nearby dispersion curves change significantly. In addition, the effect of the HMM filling factor (i.e., the ratio of the metal-layer to unit-cell thicknesses) on the SC point frequency is studied. Finally, we demonstrate the efficient control of beam behaviors using HMM PhC membranes while considering the nonlinearity of Ag. The findings of this study confirm that high-performance HMM PhC membranes can be employed in nonlinear all-optical switches, filters, tunable lenses, and other integrated optical devices.

14 November 2022 in Materials
Verified
Journal Article
Open access
PDF file
LFLixin Fu
Lixin Fu
MLMI LIN
MI LIN
ZLZixian Liang
Zixian Liang
QWQiong Wang
Qiong Wang
YZYaoxian Zheng
Yaoxian Zheng
Zhengbiao OuyangZhengbiao Ouyang
Zhengbiao Ouyang
In this paper, we studied the transmission properties, including photonic band gap (PBG) and defect mode properties, of one-dimensional photonic crystals (1D PCs) consisting of gradient materials. When keeping the average refractive index of the gradient materials in the 1D gradient-material PCs (1D GPCs) the same as the index of the corresponding normal materials in the 1D normal-material PCs (1D NPCs), by transfer matrix method, we found that the complete 1D GPCs with high-index gradient materials benefit to achieve larger omni-PBG than that in 1D NPCs. In our high-index gradient material case, for TE(TM) wave, the optimal omni-PBGs in 1D GPCs with first- and second-order gradient materials are 38.6% (50.2%) and 15.9% (22.3%) larger than that in 1D NPCs; while for the optimal relative bandwidths of omni-PBG, the corresponding promotions are 41.1% (52.3%) and 16.1% (22.6%), respectively. In addition, when defective 1D GPCs have gradient-material defect, the position of defect modes can be adjusted by selecting proper parameters of the gradient materials. These types of research are useful for designing wide PBG devices and tunable narrow-band filters which have potential application in optical communication.

24 October 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
QWQiong Wang
Qiong Wang
Zhengbiao OuyangZhengbiao Ouyang
Zhengbiao Ouyang
MLMI LIN
MI LIN
YZYaoxian Zheng
Yaoxian Zheng
Graphene-based devices have important applications attributed to their superior performance and flexible tunability in practice. In this paper, a new kind of absorber with monolayer graphene sandwiched between two layers of dielectric rings is proposed. Two peaks with almost complete absorption are realized. The mechanism is that the double-layer dielectric rings added to both sides of the graphene layer are equivalent to resonators, whose double-side coupled-cavity effect can make the incident electromagnetic wave highly localized in the upper and lower surfaces of graphene layer simultaneously, leading to significant enhancement in the absorption of graphene. Furthermore, the influence of geometrical parameters on absorption performance is investigated in detail. Also, the device can be actively manipulated after fabrication through varying the chemical potential of graphene. As a result, the frequency shifts of the two absorption peaks can reach as large as 2.82 THz/eV and 3.83 THz/eV, respectively. Such a device could be used as tunable absorbers and other functional devices, such as multichannel filters, chemical/biochemical modulators and sensors.

10 August 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
YZYaoxian Zheng
Yaoxian Zheng
FKFahim Khan
Fahim Khan
BABarkathulla Asrafali
Barkathulla Asrafali
QWQiong Wang
Qiong Wang
This study introduces an innovative integration of hyperbolic metamaterials (HMMs) and photonic crystals (PtCs), each possessing unique dispersion properties that effectively manipulate the propagation of light. We present a PtC waveguide consisting of arrays of HMM nanorods, denoted as HMM PtCs. This waveguide configuration enables the realization of a high figure of merit (FOM) nano-sensor. By modifying the refractive indices of the surrounding materials, the PtC waveguide exhibits alterations in absorption and transmission, allowing for the detection of temperature, pressure, and material variations. Numerical methods were employed to demonstrate the remarkable efficiency of this proposed system, achieving a sensitivity of 324.16 nm/RIU (refractive index unit) and an impressive FOM of 469.58 RIU−1. These results signify a substantial improvement over surface plasmonic sensors, which typically exhibit limited FOMs. As a consequence, the HMM PtC waveguide sensor emerges as an exceptionally appealing option for photonic sensing applications. The proposed HMM PtC waveguide holds vast potential across diverse fields, including biology, medicine, and clinics, representing an exciting advancement for both industry and scientific research.

2 February 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MLMI LIN
MI LIN
LFLixin Fu
Lixin Fu
SAShakeel Ahmed
Shakeel Ahmed
QWQiong Wang
Qiong Wang
YZYaoxian Zheng
Yaoxian Zheng
Zhengbiao OuyangZhengbiao Ouyang
Zhengbiao Ouyang
We propose a type of polarization-independent circulator based on a composite rod of ferrite and plasma materials in a two-dimensional photonic crystal (PhC) slab. Only one composite rod was set at the center of the structure to provide circulation for both TE- and TM-polarized waves. Additionally, to improve the performance of the circulator, three additional rods were inserted to improve the coupling condition between the center magneto-optical microcavity and the corresponding waveguides. Finite element method was used to calculate the characteristics of the structure and the Nelder–Mead optimization method was employed to obtain the optimum parameters. The results show that a low insertion loss (~0.22 dB) and high isolation (~14 dB) can be achieved in our structure for waves of both TE and TM polarizations. The idea presented here may be useful for designing compact polarization devices in large-scale integrated photonic circuits.

9 June 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YZYaoxian Zheng
Yaoxian Zheng
QWQiong Wang
Qiong Wang
MLMI LIN
MI LIN
Luigi Bibbo'Luigi Bibbo'
Luigi Bibbo'
Zhengbiao OuyangZhengbiao Ouyang
Zhengbiao Ouyang
Photonic hypercrystals (PHCs) are materials combining hyperbolic metamaterials (HMMs) with widely used photonic crystals. We found that finite-sized Type-I HMMs can support unique electromagnetic modes, which could be utilized in two-dimensional photonic crystals to achieve PHCs with twisted bands in the infrared region. Numerical investigation of the PHCs showed that the twisted bands have degenerate points that can support all-angle self-collimation effects. The behaviors of light beams change dramatically in such bands, which provides an effective method in controlling light propagation and can be applied as switching. The effect of the filling factor and the permittivity of the dielectric medium of the HMM on the twisted bands were studied. Furthermore, by considering the nonlinear effect of the dielectric layers, an all-optical switch working on the PHC twisted bands is proposed, which has low switching power and high extinction ratio (19.75 dB), superior to conventional HMM switches that require type transformation of metamaterial.