A graphene-based tunable broad-band terahertz (THz) metamaterial absorber is presented, exhibiting strong and stable absorption across a wide frequency range. The device employs an ultra-thin three-layer structure consisting of a metallic reflector, a dielectric spacer, and a patterned graphene metasurface with an asymmetric geometry. Through optimized structural parameters, the absorber achieves broad-band absorption exceeding 90% between 2.45 THz and 6.11 THz with a bandwidth of 3.66 THz, featuring three distinct resonant frequencies at 2.764 THz, 3.534 THz, and 5.41 THz, corresponding to peak absorption efficiencies of 97.26%, 96.96%, and 99.90%, respectively. Impedance matching and electric field analyses confirm that the enhanced absorption arises from the strong coupling of electric and magnetic resonances within the multilayer structure. Moreover, the absorber exhibits polarization-insensitive behavior under varying polarization angles and maintains high absorption stability for both TE and TM modes up to an incident angle of 60°, as verified by simulation results, and allows dynamic tunability through Fermi-level modulation. These characteristics highlight the absorber’s potential for advanced THz imaging, sensing, and stealth applications.
Solar thermo-photovoltaics (STPV) offer a promising route to next-generation solar energy conversion by enhancing efficiency through photothermal mechanisms. However, achieving broadband tunability and long-term material stability remains a significant challenge in the design of functional photonic absorbers. In this work, we present a novel multifunctional metamaterial absorber that integrates plasmonic MXene (Ti 3 C 2 T x ) with thermochromic VO 2 , encapsulated within a durable nanoscale Al 2 O 3 framework. The proposed architecture combines optical tunability with robust environmental stability, addressing critical limitations of existing MXene-based designs. Using finite difference time domain (FDTD) simulations, we demonstrate that the absorber achieves an average solar absorption efficiency of 96.05% under AM (Air Mass) 1.5 conditions, with only 3.95% energy loss. A thermally activated phase transition in the VO 2 layer enables dynamic optical switching, reducing absorption from over 80% at low temperature to below 20% above 68°C. The broadband response is governed by hybridized localized surface plasmon resonances (LSPRs) within the MXene core, which can be tuned via temperature, voltage, and geometry. Operating across the 0.4-3 μ m spectral range, by tunining the voltage the absorber is uniquely suited for multifunctional applications including smart optical filters, reconfigurable photonic circuits, energy-efficient smart windows, and near-infrared biomedical imaging, offering dynamic light modulation in both the visible and NIR domains. Additionally, the device exhibits strong spectral sensitivity to gases like NH 3 and CO 2 , enabling real-time environmental sensing. The dual functionality of optical modulation and gas detection makes this absorber a compelling platform for scalable smart photonic systems, with potential applications in solar energy harvesting, energy-efficient smart windows, optical switching, and environmental monitoring.
Optical wavefront transformation is essential for communication and power transfer applications across all electromagnetic spectra. In this work, we report directional multi-beam compact wavefront transformers which convert cylindrical wavefronts into finite-aperture directional beams based on near-zero refraction in 3-D metamaterial at terahertz frequencies. For this purpose, a near-zero-index metamaterial (NZIM) with three-dimensional functionality is realized, and its effective material parameters are retrieved. Near-zero refraction in NZIM is verified through the uniform phase maintenance inside the multiple stacked NZIM layers. By embedding a cylindrical wavefront source inside NZIM configurations, uni-, bi-, and quad-directional wavefront transformers are realized. The results were compared and verified against the ideal cases.
This study introduces an innovative integration of hyperbolic metamaterials (HMMs) and photonic crystals (PtCs), each possessing unique dispersion properties that effectively manipulate the propagation of light. We present a PtC waveguide consisting of arrays of HMM nanorods, denoted as HMM PtCs. This waveguide configuration enables the realization of a high figure of merit (FOM) nano-sensor. By modifying the refractive indices of the surrounding materials, the PtC waveguide exhibits alterations in absorption and transmission, allowing for the detection of temperature, pressure, and material variations. Numerical methods were employed to demonstrate the remarkable efficiency of this proposed system, achieving a sensitivity of 324.16 nm/RIU (refractive index unit) and an impressive FOM of 469.58 RIU−1. These results signify a substantial improvement over surface plasmonic sensors, which typically exhibit limited FOMs. As a consequence, the HMM PtC waveguide sensor emerges as an exceptionally appealing option for photonic sensing applications. The proposed HMM PtC waveguide holds vast potential across diverse fields, including biology, medicine, and clinics, representing an exciting advancement for both industry and scientific research.
This study introduces an innovative integration of hyperbolic metamaterials (HMMs) and photonic crystals (PtCs), each possessing unique dispersion properties that effectively manipulate the propagation of light. We present a PtC waveguide consisting of arrays of HMM nanorods, denoted as HMM PtCs. This waveguide configuration enables the realization of a high figure of merit (FOM) nano-sensor. HMMs and PtCs share the same underlying physics. HMMs can generate surface plasmonics, while PtCs offer a bandgap for the waveguide. This configuration presents a novel sensing solution that directly couples surface plasmonics and waveguide modes. By modifying the refractive indices of the surrounding materials, the PtC waveguide exhibits alterations in absorption and transmission, allowing for the detection of temperature, pressure, and material variations. The refractive indices of the surrounding materials can be adjusted based on the sensor’s intended application. For instance, when the sensor is utilized for temperature sensing, thermal infrared materials can serve as the surrounding medium. As the temperature rises, the refractive index of the surrounding material changes accordingly, impacting the waveguide modes and thereby altering absorption and transmission. We utilized the finite element method to conduct numerical simulations in order to assess the absorption and transmission characteristics of the proposed system. Given that this approach involves a full electromagnetic calculation based on Maxwell’s equations, it closely approximates real-world scenarios. The employed numerical method demonstrates the remarkable performance of this proposed system, achieving a sensitivity of 324.16 nm/RIU (refractive index unit) and an impressive FOM of 469.58 RIU−1. These results signify a substantial improvement over surface plasmonic sensors, which typically exhibit limited FOMs. The direct coupling between surface plasmonics and waveguide modes provides a distinct advantage, allowing the proposed sensor to deliver a superior performance. As a consequence, the HMM PtC waveguide sensor emerges as an exceptionally appealing option for photonic sensing applications. The complexity of the proposed system presents a fabrication challenge. Nevertheless, as fabrication technology continues to advance, we anticipate that this issue can be effectively resolved. The proposed HMM PtC waveguide holds vast potential across diverse fields, including biology, medicine, and clinics, representing an exciting advancement for both industry and scientific research.