Supported copper oxide nanoparticles are a potential candidate for replacing the rare and expensive precious metals within the automotive three-way catalyst. However, a well-designed dispersion method is necessary to allow a stable high loading of active material, compensating its lower intrinsic activity and stability. In this work, a CuO-loaded SBA-15 catalyst has been manufactured by two methods. The ammonia-driven deposition precipitation (ADP) and the molecular designed dispersion (MDD) methods are both considered as efficient deposition methods to provide well-dispersed copper oxide-based catalysts. Their morphology, copper dispersion and the chemical state of copper were characterized and compared. Due to the differences in the synthesis approach, a difference in the obtained copper oxide phases has been observed, leading to a distinct behavior in the catalytic performance. The structure-activity correlation of both catalysts has also been revealed for automotive exhaust gas abatement. Results demonstrate that various copper species can be formed depending on the precursor–support interaction, affecting selectivity and conversion during the catalytic reaction.
Copper containing silica nanostructures are easily produced through a low cost versatile approach by means of hyperbranched polyethyleneimine (PEI), a water soluble dendritic polymer. This dendritic molecule enables the formation of hybrid organic/inorganic silica nanoparticles in buffered aqueous media, at room temperature and neutral pH, through a biomimetic silicification process. Furthermore, the derived hybrid organic/inorganic materials dispersed in water can be easily loaded with various copper amounts, due to the presence of PEI, which, despite having been integrated in the silica network, retains its strong copper chelating ability. Following calcination, the obtained copper loaded nanopowders are characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), N2 adsorption, Temperature programmed reduction (TPR) and UV-Vis diffuse reflectance (UV-Vis-DR) techniques and evaluated for automotive exhaust purification under simulated conditions at the stoichiometric point. Effective control over final materials’ pore structural and morphological characteristics is provided by employing different buffer solutions, i.e., tris(hydroxymethyl)aminomethane (Tris) or phosphate buffer. It was found that the enhancement of the nanopowders textural features, obtained in the presence of Tris buffer, had a great impact on the material’s catalytic behavior, improving significantly its activity towards pollutants oxidation.