Sertac Cadirci

Dr. Sertac Cadirci

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
AAAhmet Turan Aldemir
Ahmet Turan Aldemir
SCSertac Cadirci
Sertac Cadirci
LTLevent Trabzon
Levent Trabzon
Inertial microfluidics utilize hydrodynamic forces for particle manipulation and require precise trajectory estimation for efficiency. This study examines parameters affecting micro- and nanoparticle inertial focusing in microchannels by introducing a novel sunflower geometry through asymmetric serpentine segments. This design enhances inertial focusing and particle separation through the Dean effect and continuous acceleration modulation, bolstering operational efficiency. Dynamic variations in lift (FL) and drag forces (FD) within the sunflower geometry augment their ratio, improving particle separation. Asymmetric serpentine attribute enhances lift force by adapting the coefficients (G1 and G2) along the channel and amplifies the net lift force. The varying FL in different sunflower zones concentrates particles of different sizes, while the channel curvature influences FD. While the traditional spiral microchannel only provides global forces due to its radius of curvature, the sunflower microchannel gives rise to the superposition of local forces induced by the expanding and narrowing changing of the serpentine shape and the global forces caused by the spiral shape. The study also examines the differences between local and global force effects on particle focusing. Ultimately, a passive separation of 500 nm particle is achieved by collecting the nanoparticle on the inner surface, while 1 μm particle locates at the central axis and 3.3 μm particle clusters on the outer surface. The significance of the study is that the effective passive particle separation could be managed even for sub micrometer particles without any auxiliary external forces but with inertial forces thanks to the novel sunflower microchannel design.

18 October 2021 in Journal of Thermal Science and Engineering Applications
Verified
Journal Article
Closed access
PDF file
ACAkin Caglayan
Akin Caglayan
SHSalman Mustafa Husain
Salman Mustafa Husain
MİMutlu İpek
Mutlu İpek
TATolga Nurettin Aynur
Tolga Nurettin Aynur
SCSertac Cadirci
Sertac Cadirci
Performance analysis and design optimization of refrigerators are primarily carried out by time-consuming experiments. The current study presents an alternative method to analyze refrigerators by modeling the refrigeration cycle using a software called dymola, based on an object-oriented programming language, called modelica. The main components of a domestic refrigerator, i.e., compressor, condenser, evaporator, cabinet, and capillary tube-suction-line heat exchanger are first individually modeled and validated. The full dynamic refrigeration cycle model is then created. Both the simulations and the experiments are conducted using R600a as the refrigerant with on-and off-modes of the reciprocating, single speed compressor. An algorithm block is also included to represent the dynamic cyclic behavior of the refrigerator. The algorithm controls the operation using two set-point temperatures of the cabinet. To validate the one-dimensional dynamic model, experiments are carried out on a single door refrigerator with an internal volume of 343l. Results show that the cabinet air, evaporation temperature, condensation temperature, power and energy values deviate from experimental values by less than 2 °C and 2%, respectively. The dynamic modeling is found to be in good agreement with the experiments in the on-mode of the compressor and a promising and rapid tool to represent the transient behavior of the refrigerator.

1 November 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
CTCem Turutoglu
Cem Turutoglu
SCSertac Cadirci
Sertac Cadirci
SYSerdar Yilmaz
Serdar Yilmaz
DEDuygu Erdem
Duygu Erdem
Reynolds stress model (RSM) turbulence models are expected to yield more accurate numerical results for flows with strong anisotropy, such as round free jets, because they directly solve Reynolds stresses rather than modeling them. However, when computational fluid dynamics (CFD) analyses were performed at moderate jet Reynolds numbers using the isotropization by production (IP) RSM model, it was observed that the calculated jet half-widths, decay constants, and spreading rates differed from experimental results due to uncertainties inherent in the turbulence model. In this study, the closure coefficients of the IP RSM turbulence model were calibrated using a variant of the Multi-Objective Genetic Algorithm based on jet half-width data obtained experimentally in the near-field region of the jet. With the use of appropriate discretization schemes and computational grids, the calibrated coefficient combination for the IP RSM turbulence model showed improved accuracy in modeling jet half-widths at Reynolds numbers of 10 000 and 20 000, reducing the errors of calculated decay constants and spreading rates approximately from 2% to 1% and from 16% to 5%, respectively. A detailed examination of the turbulence budget along the longitudinal axis in the self-similar region revealed that the new model coefficients enhanced the modeling of diffusion term but compromised the advection term. As a result of the altered advection term, increased error margins were observed in turbulence intensity (TI) and velocity distribution along the jet centerline, although dissipation along the axis was improved. Consequently, the modeling error in jet half-width calculations using the CFD method was decreased, enhancing the computational cost-effectiveness of the RSM turbulence model compared to more complex turbulence models.

1 January 2025 in Physics of Fluids
Verified
Journal Article
Closed access
AYAlperen Yildizeli
Alperen Yildizeli
SCSertac Cadirci
Sertac Cadirci
Reynolds Averaged Navier–Stokes turbulence models have been used over several decades in industrial and academic applications to predict turbulent flow fields. Adequacy of the predefined closure coefficients has received attention in the research community with increasing computational power in the last 20 years. In this study, the transitional and standard k–ω shear stress transport turbulence models are calibrated for flows over flat plate and backward facing step using six benchmark cases available in the literature. A systematical calibration methodology is presented, consisting of validation studies, global sensitivity analysis, reduced order modeling with Deep Neural Networks, and multi-objective optimization algorithm. Moreover, three different approaches are suggested to examine different aspects of the applicability of the calibrated closure coefficients. The results of the study demonstrate that the closure coefficients can be successfully calibrated using multi-objective optimization to improve the prediction of wall shear stresses and velocity profiles independent of the quantity of selected test cases. Comparison between different calibration approaches and their performance on different objective functions indicated their advantages and disadvantages. Calibrated values of the holistic calibration approach for the β1, β*, a1, b1, β2, and γ1 were found to be 6%, 25%, 24%, and 16% higher and 7% and 25% lower, respectively, than their default values.

12 December 2022 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
DID. Ince
D. Ince
HTH. Turhan
H. Turhan
SCSertac Cadirci
Sertac Cadirci
LTLevent Trabzon
Levent Trabzon
Passive cell separation methods have attracted great attention due to their superiority over the other methods stemming from their easy fabrication, precise manipulation, cost-effectiveness, sensitivity, and simplicity. The fluid inertia in these methods is the main factor that is affected by the channel design; thus, the channel design parameters should be chosen accordingly. Even though all channel design parameters are well addressed in inertial microfluidics, the curvature angle of the channel has not yet been extensively studied. In this study, three different curvilinear microchannels with curvature angles of 180°, 210°, and 270° were designed, keeping all other remaining parameters the same. The focusing ability of the fluorescent polystyrene microparticles with diameters of 1.1, 3.3, and 9.9 μm was investigated both experimentally and numerically to understand focusing efficiency affected by the curvature angle of the microchannel. The first set of experiments was to determine the effect of the channel curvature and indicated the favorable design as channel C, which showed focusing qualities of 0.85 and 0.92 for 9.9 μm particles at volumetric concentrations of 2% and 5%, respectively. The remaining set of experiments and CFD simulations were conducted to observe the interaction of 3.3 and 9.9 μm particles and reveal the distortion of the focusing line and particulate phase contours for 9.9 μm particles at the flow rates between 0.3 and 0.7 ml/min, which was further confirmed by enriched mixtures containing 1.1, 3.3, and 9.9 μm particles. The study showed that mixtures comprising low diameter particles could not satisfy the focusing criteria, which emphasized the importance of an appropriate particle size and concentration for a single focus line. On the other hand, it was shown that geometric features of the microchannel such as the hydraulic diameter and the curvature angle together with the particle size determine the focusing quality both experimentally and numerically. To sum up, the increment of the channel curvature angle is a determining factor for particle focusing, and a single focusing line was observed on the particles maintaining the focusing criteria even in many particle conditions. While the focusing quality of the particles was reduced by multi-particle interactions, they were proven to be separable achieving the appropriate concentration ratio.

27 September 2023 in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Verified
Journal Article
Open access
PDF file
SBSelin Bulgu
Selin Bulgu
AYAlperen Yildizeli̇
Alperen Yildizeli̇
SCSertac Cadirci
Sertac Cadirci
SYSema Yildirim
Sema Yildirim
This study aims to investigate the effects of irrigation needles geometries on the flow inside the root canal and compare their irrigation performances based on Computational Fluid Dynamics (CFD) analyzes. CFD simulations of three commonly used close-ended irrigation needles were performed for various inlet Reynolds numbers and working lengths. Their irrigation performances were evaluated based on apical pressure and wall shear stress. The flow was assumed to be incompressible, turbulent and steady at all inlet Reynolds numbers. The closed-ended needles showed similar limited irrigant penetration toward the apex. Among all configurations, the Model C outperforms others as it provides the highest wall shear stress around the needle tip and the lowest apical pressures in the apical foramen, which reduces the risk of apical extrusion. The needle tip designs influence important parameters for the effectiveness and safety of the irrigation process.