Pit membranes in between neighboring conduits of xylem play a crucial role in plant water transport. In this review, the morphological characteristics, chemical composition and mechanical properties of bordered pit membranes were summarized and linked with their functional roles in xylem hydraulics. The trade-off between xylem hydraulic efficiency and safety was closely related with morphology and properties of pit membranes, and xylem embolism resistance was also determined by the pit membrane morphology and properties. Besides, to further investigate the effects of bordered pit membranes morphology and properties on plant xylem hydraulic functions, here we modelled three-dimensional structure of bordered pit membranes by applying a deposition technique. Based on reconstructed 3D pit membrane structures, a virtual fibril network was generated to model the microflow pattern across inter-vessel pit membranes. Moreover, the mechanical behavior of intervessel pit membranes was estimated from a single microfibril’s mechanical property. Pit membranes morphology varied among different angiosperm and gymnosperm species. Our modelling work suggested that larger pores of pit membranes do not necessarily contribute to major flow rate across pit membranes; instead, the obstructed degree of flow pathway across the pit membranes plays a more important role. Our work provides useful information for studying the mechanism of microfluid flow transport across pit membranes and also sheds light on investigating the response of pit membranes both at normal and stressed conditions, thus improving our understanding on functional roles of pit membranes in xylem hydraulic function. Further work could be done to study the morphological and mechanical response of bordered pit membranes under different dehydrated conditions, as well as the related microflow behavior, based on our constructed model.
Bamboo has natural damping properties, but, due to the obvious gradient differences in bamboo walls, the damping properties of different layers may vary. Using bamboo slivers as the research object, this study investigated the underlying mechanism of the effect of microstructural and chemical components on the damping properties (η, damping ratio) of bamboo using the resonance and nonresonance methods. The damping ratio decreased on L3 (inner layer), L2 (middle layer), and L1 (outer layer) due to lower microfibril angles, increased crystallinity of cellulose, and decreased hemicellulose content. All of these limited the motion of the bamboo’s molecular chains. The damping ratio successively increased in the oven-dried, air-dried, and water saturated states because water acted as a plasticizer. The damping ratio of L1, in the oven-dried state, was slightly higher than that of the air-dried state because L1 had the lowest water content. This allowed less water to escape during drying, which intensified the molecular distortion. The initial tan δ (tangent of the loss angle) decreased successively on the L3, L2, and L1 layers of the bamboo, and the tan δ of L3 was lower than that of L2 due to changes in the temperature sensitivity of hemicellulose.
Bamboo musical instruments, such as bamboo flute and Ching-hu (Beijing opera fiddle), can generate a crisp and melodious sound closely related to the delicate multiscale pore structure of bamboo. Bamboo is a natural hydrophilic material, and its acoustic vibration characteristics are highly sensitive to changeable environmental humidity levels. Herein, we investigated the acoustic vibration characteristics of bamboo under three conditions: constant relative humidity (status I), changeable relative humidity (status II), and subjected to water extraction (status III). Three typical parameters were selected as evaluation indicators of bamboo acoustic vibration characteristics, namely, specific dynamic elastic modulus (/), loss tangent (tan), and acoustical converting efficiency (ACE). The outer bamboos (OB) had higher / and ACE but lower equilibrium moisture content (EMC) and tan than the inner bamboos (IB). Under status I, bamboo showed the maximum / and ACE and the minimum tan at 35% RH (relative humidity) and about 6% MC. Compared with the bamboo under status II, the bamboo under status I retained higher / and ACE and lower tan. However, the bamboo under status (III) reached the maximum / and ACE and the minimum tan. The bamboo musical instrument is made of bamboo with proper removal of water-soluble extractives and high fiber volume fraction and stored in a stable relative humidity environment of 35%, which has suitable acoustic vibration characteristics.