In this paper, the frequency broadband effect in vibration energy harvesting was studied numerically using a quasi-zero stiffness resonator with two potential wells and piezoelectric transducers. Corresponding solutions were investigated for system excitation harmonics at various frequencies. Solutions for the higher voltage output were collected in specific branches of the power output diagram. Both the resonant solution synchronized with excitation and the frequency responses of the subharmonic spectra were found. The selected cases were illustrated and classified using a phase portrait, a Poincaré section, and recurrence plot (RP) approaches. Select recurrence quantification analysis (RQA) measures were used to characterize the discussed solutions.
Reading and analyzing data from sensors are crucial in many areas of life. IoT concepts and related issues are becoming more and more popular, but before we can process data and draw conclusions, we need to think about how to design an application. The most popular solutions today are microservices and monolithic architecture. In addition to this choice, there is also the question of the technology in which you will work. There are more and more of them on the market and in each of them it is practically possible to achieve similar results, but the difference lies in how quickly it will be possible and whether the approach invented will turn out to be the most optimal. Making the right decisions at the beginning of application development can determine its path to success or failure. The main goal of this article was to compare technologies used in applications based on microservice architecture. The preparation of a book lending system, whose server part was implemented in three different versions, each using a different type of technology, helped to achieve this goal. The compared solutions were: Spring Boot, Micronaut and Quarkus. The reason for this research was to investigate projects using sensor networks, ranging from telemedicine applications to extensive sensor networks collecting scientific data, or working in an environment with limited resources, e.g., with BLE or WIFI transmitters, where it is critical to supply energy to these transmitters. Therefore, the issue of efficiency and hence energy savings may be a key issue depending on the selected programming technology.
The article describes how to use accelerometer and gyroscope as an alternative to a computer mouse to control computer wirelessly. The use of the proposed device to switch presentation slides is presented as an example.
The article presents the results of the application of golden section search for selection of the MEMS electro-actuator comb length to receive the desired displacement at given voltage heating. The proposed solutions have been implemented programmatically using the ANSYS system.
The article presents the experimental study effect of the close expanse observation point to buildings, which leads to a significant increase in noise level. Based on the experimental data, the correction for multiple reflections was improved.
This article is aimed and investigated the optimization model of the capacitive accelerometer. To automate the process of research the bisection method has been suggested. Software implementation of the suggested solutions in the form of applications for ANSYS system allowed to automate the process of selecting the thickness of the seismic mass and spring elements accelerometer, so as to obtain the required displacement of the movable plate of the accelerometer.