Plastic waste accumulation has been recognized as one of the most critical challenges of modern societies worldwide. Traditional waste management practices include open burning, landfilling, and incineration, resulting in greenhouse gas emissions and economic loss. In contrast, emerging techniques for plastic waste management include microwave-assisted conversion, plasma-assisted conversion, supercritical water conversion, and photo reforming to obtain high-value products. Problems with poorly managed plastic waste are particularly serious in developing countries. This review article examines the emerging strategies and production of various high-value-added products from plastic waste. Additionally, the uses of plastic waste in different sectors, such as construction, fuel production, wastewater treatment, electrode materials, carbonaceous nanomaterials, and other high-value-added products are reviewed. It has been observed that there is a pressing need to utilize plastic waste for a circular economy and recycling for different value-added products. More specifically, there is limited knowledge on emerging plastic waste conversion mechanisms and efficiency. Therefore, this review will help to highlight the negative environmental impacts of plastic waste accumulation and the importance of modern techniques for waste management.

The thermochemical conversion of different feedstocks is a technology capable of reducing the amount of biowaste materials produced. In addition, the gasification of feedstock using steam as a gasifying agent also produces hydrogen, which is a clean energy fuel. This article aimed to encapsulate the current status of biowaste gasification and to explain, in detail, the advantages and limitations of gasification technologies. In this review paper, different gasifying agents such as steam, air, and oxygen, as well as their effects on the quality of syngas production, are discussed. In addition, the effects of reactor configuration and different operating parameters, such as temperature, pressure, equivalence ratio, and incorporation of a catalyst, as well as their effects on the ratio of H₂/CO, LHV, syngas yield, and tar production, were critically evaluated. Although gasification is a sustainable and ecologically sound biomass utilization technology, tar formation is the main problem in the biomass gasification process. Tar can condense in the reactor, and clog and contaminate equipment. It has been shown that an optimized gasifier and a high-activity catalyst can effectively reduce tar formation. However, key biowaste treatment technologies and concepts must first be improved and demonstrated at the market level to increase stakeholder confidence. Gasification can be the driving force of this integration, effectively replacing fossil fuels with produced gas. In addition, support policies are usually needed to make the integration of biomass gasification technology into the industry profitable with fully functional gasification plants. Therefore, to address such issues, this study focused on addressing these issues and an overview of gasification concepts.

Layered double hydroxides (LDHs) with their unique structural chemistry create opportunities to be modified with polymers, making different nanocomposites. In the current research, a novel PET-PAN embedded with Mg-AI-LDH-PVA nanocomposite membrane was fabricated through electrospinning. SEM, EDX, FTIR, XRD, and AFM were carried out to investigate the structure and morphology of the nanocomposite membrane. The characterization of the optimized nanocomposite membrane showed a beadless, smooth structure with a nanofiber diameter of 695 nm. The water contact angle and tensile strength were 16° and 1.4 Mpa, respectively, showing an increase in the hydrophilicity and stability of the nanocomposite membrane by the addition of Mg-Al-LDH-PVA. To evaluate the adsorption performance of the nanocomposite membrane, operating parameters were achieved for Cr(VI) and methyl orange at pH 2.0 and pH 4.0, respectively, including contact time, adsorbate dose, and pollutant concentration. The adsorption data of the nanocomposite membrane showed the removal of 68% and 80% for Cr(VI) and methyl orange, respectively. The process of adsorption followed a Langmuir isotherm model that fit well and pseudo-2nd order kinetics with R² values of 0.97 and 0.99, respectively. The recycling results showed the membrane’s stability for up to five cycles. The developed membrane can be used for efficient removal of pollutants from wastewater.