The thermochemical conversion of different feedstocks is a technology capable of reducing the amount of biowaste materials produced. In addition, the gasification of feedstock using steam as a gasifying agent also produces hydrogen, which is a clean energy fuel. This article aimed to encapsulate the current status of biowaste gasification and to explain, in detail, the advantages and limitations of gasification technologies. In this review paper, different gasifying agents such as steam, air, and oxygen, as well as their effects on the quality of syngas production, are discussed. In addition, the effects of reactor configuration and different operating parameters, such as temperature, pressure, equivalence ratio, and incorporation of a catalyst, as well as their effects on the ratio of H₂/CO, LHV, syngas yield, and tar production, were critically evaluated. Although gasification is a sustainable and ecologically sound biomass utilization technology, tar formation is the main problem in the biomass gasification process. Tar can condense in the reactor, and clog and contaminate equipment. It has been shown that an optimized gasifier and a high-activity catalyst can effectively reduce tar formation. However, key biowaste treatment technologies and concepts must first be improved and demonstrated at the market level to increase stakeholder confidence. Gasification can be the driving force of this integration, effectively replacing fossil fuels with produced gas. In addition, support policies are usually needed to make the integration of biomass gasification technology into the industry profitable with fully functional gasification plants. Therefore, to address such issues, this study focused on addressing these issues and an overview of gasification concepts.

The presence of inorganic and organic substances may alter the physicochemical properties of iron (Fe) salt precipitates, thereby stabilizing the antimony (Sb) oxyanions in potable water during the chemical treatment process. Therefore, the present study aimed to examine the surface characteristics, size of Fe flocs and coagulation performance of Sb oxyanions under different aqueous matrices. The results showed that surface properties of Fe flocs significantly varies with pH in both Sb(III, V) suspensions, thereby increasing the mobility of Sb(V) ions in alkaline conditions. The negligible change in surface characteristics of Fe flocs was observed in pure water and Sb(III, V) suspension at pH 7. The key role of Van der Waals forces of attraction as well as hydration force in the aggregation of early formed flocs were found, with greater agglomeration capability at higher more ferric chloride dosage. The higher Sb(V) loading decreased the size of Fe flocs and reversed the surface charge of precipitates, resulting in a significant reduction in Sb(V) removal efficiency. The competitive inhibition effect on Sb(III, V) removal was noticed in the presence of phosphate anions, owing to lowering of ζ-potential values towards more negative trajectory. The presence of hydrophobic organic matter (humic acid) significantly altered the surface characteristics of Fe flocs, thereby affecting the coagulation behavior of Sb in water as compared to the hydrophilic (salicylic acid). Overall, the findings of this research may provide a new insight into the variation in physicochemical characteristics of Fe flocs and Sb removal behavior in the presence of inorganic and organic compounds during the drinking water treatment process.

There is an increasing reliance on renewable energy especially Solar Energy as the fossils are on the way to depletion.It offers an environmental friendly solution with an affordable comparative paradigm. Solar photovoltaic-thermal collectors have remained of the particular interest because of their higher overall efficiencies. Most of its applications related with solar hybrid PVT systems focuses more on electrical output rather than thermal output, and the contacting fluid is allowed to act as a coolant to assure that the solar cell operates in the ranges specified by the manufacturer to guarantee higher electrical efficiency. This ultimately allows fluid to retain higher temperature that could be utilized for meeting the heating demand of any residential household. First, the PVT analyses are performed over a system comprising of Fresnel-based Solar Module to allow higher irradiance to fall for relative higher conversion of efficiency and to achieve higher temperature ranges in the contacting fluid (water). The electrical parameters are compared, and a significant increase in the power ranges is concluded. Secondly, a simulated thermal structure of the heating tank is presented that utilises the heated water from the PVT system in meeting the heating demand of a residential household. When accounting all the electrical parameters, approximately 10% increase is noticed in power produced, and sufficient energy used for the traditional heating of water is retained.