In the present work, complex powder alloys containing spinel as a minor phase were produced by mechanical alloying in a high-energy planetary ball mill from a 33Al–45Cu–22Fe (at.%) powder blend. These alloys show characteristics suitable for the synthesis of promising catalysts. The alloying was conducted in two stages: at the first stage, a Cu+Fe powder mixture was ball-milled for 90 min; at the second stage, Al was added, and the milling process was continued for another 24 min. The main products of mechanical alloying formed at each stage were studied using X-ray diffraction phase analysis, Mössbauer spectroscopy, transmission electron microscopy, and energy-dispersive spectroscopy. At the end of the first stage, crystalline iron was not found. The main product of the first stage was a metastable Cu(Fe) solid solution with a face-centered cubic structure. At the second stage, the Cu(Fe) solid solution transformed to Cu(Al), several Fe-containing amorphous phases, and a spinel phase. The products of the two-stage process were different from those of the single-stage mechanical alloying of the ternary elemental powder mixture; the formation of undesirable intermediate phases was avoided, which ensured excellent composition uniformity. A sequence of solid-state reactions occurring during mechanical alloying was proposed. Mesopores and a spinel phase were the features of the two-stage milled material (both are desirable for the target catalyst).
21 September 2007 in Reaction Kinetics, Mechanisms and Catalysis
Textural, mechanical and catalytic properties of porous composite materials Al2O3/Al, MeO x (Me)/Al2O3/Al with metal particles homogeneously distributed in the alumina matrix were studied. These ma...
The activity of plates of CuO/AlO/FeAlO/FeAl structured cermet catalysts is compared by varying their alumina content. The catalysts were prepared by impregnation of cermet supports obtained by mechanochemical activation of powder mixtures of an alumina precursor [20–50% (wt.)], iron, and aluminum, followed by hydrothermal treatment and calcination. It is shown that increasing the content of the alumina precursor (product of thermal activation of gibbsite) increases the specific surface area of the support and the mesopore and macropore volumes and reduces its mechanical strength. The content of the active component (CuO) also increases, resulting in an increase in the specific activity of catalyst despite a reduction in the effectiveness of using the active component. The activity of catalysts with a moderate concentration of alumina is sufficient to initiate methane oxidation.