Sosnovsky’s hogweed is an invasive species that suppresses natural meadow biocenoses, but at the same time it can be a source of various biological substances (raw materials). Hogweed can be processed to produce cellulose. The obvious advantage of cellulose from Sosnovsky’s hogweed is the unsuitability of the raw material for other uses, i.e., while valuable resources that are now being used to produce cellulose can be saved, the stems of Sosnovsky’s hogweed are waste products obtained because of getting rid of the plant. Despite this, there is an actual problem of including hogweed in the production chain. To solve this problem, business models can be built that are aimed at using the biproducts of processing hogweed. It is important that business models not only reflect the process of producing added value but also can solve the main problem of processing weed plants: the finiteness of the specified resource. Specifically, entrepreneurs starting such a business should not get into a situation where they destroy their only resource. This article is focused on a comparison of business models according to the following criteria: feasibility, profitability, and environmental impact. Business models that involve constructing a processing plant, using mobile laboratories, and industrial symbiosis models are presented. The overall result of this work is a business model that meets the specified criteria. Similar business models can be used for other plants with the possibility of obtaining valuable raw materials. Research shows how Sosnovsky hogweed can be processed into bioethanol or cellulose.
This article puts forward arguments in favor of the necessity of conducting complex measurements of molecular transport coefficients that quantitatively determine the coefficients of dynamic viscosity, thermal diffusivity and molecular diffusion. The rheological studies have been carried out on the viscometers of two types: those with a rolling ball (HÖPPLER® KF 3.2.), and those with a rotary one (Rheotest RN 4.1.). The thermophysical studies have been performed using the analyzer Hot Disk TPS 2500S. The measurements have been taken in the temperature range of 283 to 363 K. The concentration of dry substances has varied from 16.2 to 77.7% dry wt. An empirical equation for calculating the density of aqueous solutions of beet molasses has been obtained. The diagrams of the dependence of the dynamic viscosity on the shear rate in the range of 1 s−1 to 500 s−1 at different temperatures have been provided. The diagrams of the dependence of the coefficients of thermal conductivity and thermal diffusivity on the temperature and the concentration of dry substances have been presented, and empirical equations for their calculation have been obtained. The findings can be used for engineering calculations of hydrodynamic and heat-exchange processes in biotechnological equipment.
1 May 2019 in IOP Conference Series: Materials Science and Engineering
The strategic guidelines of the energy policy are the environmental safety of the energy sector. The article discusses the creation in the laboratory of GUAP on the basis of the software package National Instruments informatized waste assessment system on the possibility and choice of waste disposal, as well as the choice of waste processor from the database. This system will create activity in the waste market, which will involve processors. For this purpose, the research of thermal conductivity of RDF-raw materials of waste landfills in the laboratory of quality control of new functional materials GUAP and programming in Java Script virtual platform ECO 365. The global perspective of the project is the consolidation of the laboratory of new composite materials GUAP to create a waste processing Center with the main focus on research in the field of production and sale of biogas. Demand in the market is large. The used technologies of analytical and measuring instruments and programs of three-dimensional equipment will allow to apply in parallel with the analysis of raw materials the possibility of developing equipment for the production of by-products from waste with their subsequent certification.
The application of the average annual efficiency evaluation of heat recovery equipment in selection of the optimal evaporation temperatures of the refrigerant in ventilation systems equipped with a heat pump as the main heat exchanger is considered. The results of virtual experiments are analyzed. Conclusions about the use of annual efficiency evaluation in the design of life-support systems have been made.
15 March 2022 in Metal Working and Material Science
Introduction. For reliable operation of low-temperature equipment, it is necessary to use materials capable of ensuring operability in a wide temperature range under conditions of alternating loads, exposure to corrosive media, etc. Most often, in such cases, metastable austenitic steels (MAS) of various alloying systems are used. Despite sufficient experience in the use of such materials, not enough information is collected on the behavior of such materials at low temperatures, including phase-structural transformations, the features of such transformations in different temperature zones, including when a load is applied, both static and dynamic. The subject of the study in this work is selected MAS 10Cr14NMn20 and 10Cr14Mn14Ni4Ti grades. The purpose of the study is to evaluate the performance of industrially used metastable austenitic steels for its possible use instead of steel 12Cr18Ni10Ti. Research methodology. The phase composition of the samples was studied on a DRON-3.0 X-ray diffractometer. Mechanical tests were carried out in the temperature range from +20 to -196 °C. Static uniaxial tensile tests were carried out on a R-20 tensile testing machine; cylindrical specimens with threaded heads were prepared according to GOST 11150–75, as well as samples with a circumferential notches. Dynamic bending tests were carried out on a pendulum impact tester, using samples according to GOST 9454–78. Results and Discussion. Based on the data obtained, it is found that an increase in the strain rate at low temperatures contributes to a decrease in the number of martensitic phases in the steels under study. It is found that the hardenability during elastic-plastic deformation decreases and completely disappears at the temperature of the material transition to a brittle state. It is shown that an increase in the rate of low-temperature deformation of samples prevents the development of phase martensitic transformations in steels. The results obtained can be recommended for use in the selection of materials for the manufacture of equipment operating at temperatures down to -196 °C. Conclusions. It is shown that the obtained values of the characteristics of mechanical properties make it possible to recommend the studied MAS as a substitute for steel 12Cr18Ni10Ti, down to a temperature of -196 °C.