Sosnovsky’s hogweed is an invasive species that suppresses natural meadow biocenoses, but at the same time it can be a source of various biological substances (raw materials). Hogweed can be processed to produce cellulose. The obvious advantage of cellulose from Sosnovsky’s hogweed is the unsuitability of the raw material for other uses, i.e., while valuable resources that are now being used to produce cellulose can be saved, the stems of Sosnovsky’s hogweed are waste products obtained because of getting rid of the plant. Despite this, there is an actual problem of including hogweed in the production chain. To solve this problem, business models can be built that are aimed at using the biproducts of processing hogweed. It is important that business models not only reflect the process of producing added value but also can solve the main problem of processing weed plants: the finiteness of the specified resource. Specifically, entrepreneurs starting such a business should not get into a situation where they destroy their only resource. This article is focused on a comparison of business models according to the following criteria: feasibility, profitability, and environmental impact. Business models that involve constructing a processing plant, using mobile laboratories, and industrial symbiosis models are presented. The overall result of this work is a business model that meets the specified criteria. Similar business models can be used for other plants with the possibility of obtaining valuable raw materials. Research shows how Sosnovsky hogweed can be processed into bioethanol or cellulose.
This article puts forward arguments in favor of the necessity of conducting complex measurements of molecular transport coefficients that quantitatively determine the coefficients of dynamic viscosity, thermal diffusivity and molecular diffusion. The rheological studies have been carried out on the viscometers of two types: those with a rolling ball (HÖPPLER® KF 3.2.), and those with a rotary one (Rheotest RN 4.1.). The thermophysical studies have been performed using the analyzer Hot Disk TPS 2500S. The measurements have been taken in the temperature range of 283 to 363 K. The concentration of dry substances has varied from 16.2 to 77.7% dry wt. An empirical equation for calculating the density of aqueous solutions of beet molasses has been obtained. The diagrams of the dependence of the dynamic viscosity on the shear rate in the range of 1 s−1 to 500 s−1 at different temperatures have been provided. The diagrams of the dependence of the coefficients of thermal conductivity and thermal diffusivity on the temperature and the concentration of dry substances have been presented, and empirical equations for their calculation have been obtained. The findings can be used for engineering calculations of hydrodynamic and heat-exchange processes in biotechnological equipment.
2 October 2024 in Food Processing: Techniques and Technology
To keep up with the growing demand, producers of frozen plant products have to develop new freezing technologies that would preserve the sensory and biological properties of fruits and vegetables. Pectins are important structural and moisturebinding components of plant cells that improve their stability at high and low temperatures. The research objective was to study the effect of blanching and various freezing methods on the composition of pectin substances during long-term storage of fruits and vegetables. The research featured scorzonera, salsify, kohlrabi, apples, and plums. The freezing modes included two temperature modes (–24 and –35°C) and three freezing methods, i.e., blanching, air-freezing represented by natural air-freezing, artificial convection, and fluidization, and immersion in a mix of water, ethyl alcohol, sucrose, and sodium chloride. The frozen samples were stored in sealed bags at –18°C for 7–12 months. The water-soluble pectin, intermediate fraction, and protopectin obtained by extraction were determined using the colorimetric carbazole method. The qu alitative analysis relied on infrared spectroscopy. Blanching reduced the pectin content by 2–10% in vegetables and by 18–21% in apples. Fluidization and immersion freezing had the least damaging effect on pectins. Air-freezing with natural convection caused the greatest damage to protopectin. During storage, the maximal loss of pectins (66%) occurred in the salsify sample subjected to natural air convection at –24°C. The least damage (9%) was detected in the kohlrabi sample frozen at –24°C in ice environment. A higher moisture content in the native state correlated with minimal losses of pectins by the end of refrigerated storage. The research also included identification of absorption bands for pectic substances in fro zen scorzonera and salsify. In this study, pectin content depended on moisture content in tissues, blanching process, and freezing method. All frozen samples demonstrated losses of protopectin and an increase in the intermediate fraction. An intense freezing process had a positive effect on the pectin content during long-term storage. However, after six months of storage, the samples demonstrated significant fractional changes and pectin losses.
The article studies the energy efficiency of plant products cryopreservation and the ways to optimize the operating modes of refrigeration equipment. The aim of the work is to develop rational modes of plant products freezing in order to minimize energy costs. The tasks were solved: study of the effect of freezing conditions on the process kinetics and energy costs; effect assessment of morphological structure on the internal thermal resistance of objects; search of indirect control of the product state based on the energy characteristics of the system. The object of the study was the cryopreservation of samples with different tissue structures (blanched apple and cranberry) in the experimental stand with a static cooling system. It was found that under identical conditions (t = -15 °C), the processing time of cranberries was ~4.75 h (cryoscopic plateau - ~1.5 h); for blanched apples - ~7.2 and ~2.5 hours, respectively. Blanching reduces the effective product thermal conductivity, increasing the phase transition time. The most important result is to find the relationship between changes in the compressor duty cycle and the phase transition stage in plant products. Significant undercooling in cranberries ensures a high rate of nucleation of small crystals at low heat dissipation rates. The significance of these results lies in the development of a method for indirectly monitoring the freezing process through standard automation systems without the use of invasive sensors. This allows for the optimization of control algorithms and the reduction of unproductive energy consumption in refrigeration systems.
The main objective of the study is to improve energy efficiency of a shell-and-tube jet injection fermenter (SJT) for aerobic cultivation of microorganisms. The relevance of the work is determined by the biotechnology industry's need to transition to energy-efficient cultivation processes. Using high biomass concentrations increases specific productivity, yet creating such bioreactors requires precise knowledge of thermophysical and mass transfer properties of dense suspensions, which are currently lacking. To achieve the stated goal, the following tasks were solved: a scientific literature review; development of an experimental methodology; selection of research objects (water-suspended Saccharomyces cerevisiae at 4.81-20.17 wt.% ADY); analysis of rheological behavior and thermal constants from 10 to 50°C (283.15-323.15 K) with 10°C steps; and derivation of regression equations. The most important results are experimentally established heat and mass transfer patterns. The existence of limiting concentration, at which the nature of the suspension flow changes fundamentally, was discovered. It was revealed that at low shear rate gradients, water-yeast suspension behaves like pseudoplastic fluids, but with an increase in the velocity gradient, their behavior becomes characteristic of dilatant fluids. Also, after 30°C thermal conductivity - previously declining- began to rise, likely as yeast cells perished. The significance of the obtained results lies in their further use in laboratory testing of the characteristics of supplied raw materials, in choosing technological modes for culturing microorganisms in production, as well as in heat and mass transfer calculations in the design of modern apparatus designs.