The vehicle-to-grid concept emerged very quickly after the integration of renewable energy resources because of their intermittency and to support the grid during on-peak periods, consequently preventing congestion and any subsequent grid instability. Renewable energies offer a large source of clean energy, but they are not controllable, as they depend on weather conditions. This problem is solved by adding energy storage elements, implementing a demand response through shiftable loads, and the vehicle-to-grid/vehicle-to-home technologies. Indeed, an electric vehicle is equipped with a high-capacity battery, which can be used to store a certain amount of energy and give it back again later when required to fulfill the electricity demand and prevent an energy shortage when the main-grid power is limited for security reasons. In this context, this paper presents a comparative study between two home microgrids, in one of which the concept of vehicle-to-home is integrated to provide a case study to demonstrate the interest of this technology at the home level. The considered microgrid is composed of renewable energy resources, battery energy storage, and is connected to the main grid. As the vehicle is not available all day, in order to have consistent results, its intervention is considered in the evening, night, and early morning hours. Two case studies are carried out. In the first one, the vehicle-to-home concept is not taken into account. In this case, the system depends only on renewable resources and the energy storage system. Subsequently, the electric vehicle is considered as an additional energy storage device over a few hours. Electric vehicle integration brings an economic contribution by reducing the cost, supporting the other MG components, and relieving the main grid. Simulation results using real weather data for two cities in France, namely Brest and Toulon, show the effectiveness of the vehicle-to-home concept in terms of cost, energy self-sufficiency, and continuity of electrical service.

With the need for more environmentally friendly transportation and the wide deployment of electric and plug-in hybrid vehicles, electric vehicle (EV) charging stations have become a major issue for car manufacturers and a real challenge for researchers all over the world. Indeed, the high cost of battery energy storage, the limited EV autonomy and battery lifespan, the battery charging time, the deployment cost of a fast charging infrastructure, and the significant impact on the power grid are the origin of several research projects focused on advanced power electronics topologies and the optimization of the EV charging stations in terms of power transfer and geographical location. Three charging levels can be distinguished, which differ in terms of output power and charging time. The higher the level of charging, the faster the charging process, as more power is delivered to the vehicle at the expense of power quality issues and disturbances. Moreover, three types of charging systems can be distinguished, which are inductive recharging (contactless power transfer), conductive charging systems, and battery swapping. Additionally, EVs encompass fuel cell (FC) EVs, which uses hydrogen as primary energy resources, which is nowadays under extensive research activities in academia and industry. This review paper aims at presenting a state of the art review of major advances in power electronics architectures for EVs traction drives, and battery-based EVs charging stations. Specifically, the focus is made on light-duty electric vehicles drivetrain power electronics and charging stations specifications, the proposed power electronics solutions, the advantages and drawbacks of all these technologies, and perspectives for future research works in terms of smart EV charging and up-to-date solutions for power system disturbances mitigation.