Chen Zhang

Dr. Chen Zhang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2022 in International Journal of Smart and Nano Materials
Verified
Journal Article
Open access
CZChen Zhang
Chen Zhang
RLRenhao Liu
Renhao Liu
CTChongcong Tao
Chongcong Tao
CZChao Zhang
Chao Zhang
Hongli JiHongli Ji
Hongli Ji
JQJinhao Qiu
Jinhao Qiu
In this work, a novel aircraft door sealing structure driven by shape memory alloys (SMAs) is proposed that offers much improved sealing capability than traditional sealing plates. The two-way shape memory effect (TWSME) of SMAs is utilized so that the proposed sealing plate can change its shape through heating and cooling of the driving SMA unit. Considering the inhomogeneous temperature and recovery strain field the SMA exhibits while being trained, a modified finite element (FE) model of the sealing structure is established to predict the deflection of the SMA-based sealing plate. Finally, verification experiments are carried out. The experimental results show good agreement with the FE predictions, indicating good accuracy of the modified FE model as well as the effectiveness of the proposed sealing structure. GRAPHICAL ABSTRACT

5 January 2023 in Actuators
Verified
Journal Article
Open access
PDF file
RLRenhao Liu
Renhao Liu
CZChen Zhang
Chen Zhang
Hongli JiHongli Ji
Hongli Ji
Chao ZhangChao Zhang
Chao Zhang
JQJinhao Qiu
Jinhao Qiu
Shape memory alloys (SMAs) are widely used in aerospace, automobile, and other fields because of their excellent properties, such as large driving force and large deformation. A training method with a bidirectional memory effect is proposed for SMA actuators. The trained SMA units can be heated and cooled to change their shape (shorten and extend). The trained SMA is used as an actuator to drive the deformation of a structure. Due to the obvious hysteresis characteristics of SMA, a temperature-displacement hysteresis model based on the Preisach model is proposed in order to reduce the influence of hysteresis in the process of structural deformation. The F function method (FFM) is used for Preisach numerical implementation, and a PID control method is used for the precise control of structural deformation. Compared with the PID control method without hysteresis model, this method is superior to the PID control method in response speed and control accuracy. The maximum relative error of three target points in the experiment is 5.45%, which is better than the PID control method without this model. The hysteresis model can be applied to the displacement control of a SMA-based actuator.

23 August 2021 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
PDF file
JQJinhao Qiu
Jinhao Qiu
LHLin Hao
Lin Hao
HJHongli Ji
Hongli Ji
CZChen Zhang
Chen Zhang
RNRui Nie
Rui Nie
A shape memory alloy (SMA) with composition of Ni50.1Ti49.9 (at. %) was used for fabrication of a 3-D bump structure intended for use as an active shock control bump (SCB) into a transonic wing. This kind of bump is a variable-geometry structure designed to reduce the drag induced by shock wave ensure wing’s aerodynamic performance over the entire range of operating conditions. To meet this target, the SMA bump requires to exhibit two-way shape memory effect (TWSME) so that it can yield continuous shape change by properly changing the driving temperature. Result from differential scanning calorimetry was first presented to provide material’s phase transformation temperatures. To obtain the TWSME, a thermo-mechanical training procedure was proposed and a set of training devices were designed for training SMA bump. The SMA bump in this paper is trained to have a relatively flat shape in high temperature and can swell up when cooling. After more than 80 times training, the TWSME of the material tends to be stable. Then the thermo-mechanical responses of the SMA bump which is subjected to about 100 times training was tested. The result shows that the trained SMA bump can generate about 1.2 mm maximum recoverable deformation during martensitic transformation, which is about 3% of the ratio of the deformation region. Finally, the influence of external load on the thermo-mechanical response of the trained SMA bump were also studied.

8 October 2021 in Journal of Intelligent Material Systems and Structures
Verified
Journal Article
Closed access
PDF file
CZChen Zhang
Chen Zhang
HJHongli Ji
Hongli Ji
XCXing Chen
Xing Chen
JQJinhao Qiu
Jinhao Qiu
In this paper, shape memory alloy (SMA) bumps with two-way shape memory effect (TWSME) are trained by simple but effective training approaches, which provides a new idea for the actuations of the shock control bump (SCB) on airfoil. Two different configurations of bump structures (2D and 3D SMA bumps) are designed and fabricated. The bumps are required to exhibit TWSME so that it can change its shape by heating and cooling between two stable states at austenitic phase and martensitic phase, respectively. To obtain the TWSME, the material is trained in the range of martensitic finish temperature and austenitic finish temperature whilst a displacement boundary condition is imposed. A set of fixtures, which can be assembled to the universal testing machine (UTM), are designed to achieve the clamped boundary condition during thermal cycles of the training process. After training, SMA bumps with the TWSME, that bulge at low-temperature and become flat at high, are obtained. Structural tests and deformation control are then carried out afterwards to show the deformation performance of the trained SMA bumps.

19 October 2023 in arXiv
Verified
Preprint
Open access
PDF file
CZChenyu Zhang
Chenyu Zhang
CZChen Zhang
Chen Zhang
Juntian QuJuntian Qu
Juntian Qu
XQXiang Qian
Xiang Qian
All-around, real-time navigation and sensing across the water environments by miniature soft robotics are promising, for their merits of small size, high agility and good compliance to the unstructured surroundings. In this paper, we propose and demonstrate a mantas-like soft aquatic robot which propels itself by flapping-fins using rolled dielectric elastomer actuators (DEAs) with bending motions. This robot exhibits fast-moving capabilities of swimming at 57mm/s or 1.25 body length per second (BL/s), skating on water surface at 64 mm/s (1.36 BL/s) and vertical ascending at 38mm/s (0.82 BL/s) at 1300 V, 17 Hz of the power supply. These results show the feasibility of adopting rolled DEAs for mesoscale aquatic robots with high motion performance in various water-related scenarios.