weibin Cai

Prof. Dr. weibin Cai

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2019 in RSC Advances
Verified
Journal Article
Open access
PDF file
XCXue Cheng
Xue Cheng
WCweibin Cai
weibin Cai
XCXiaohan Chen
Xiaohan Chen
ZSZhen Shi
Zhen Shi
JLJiding Li
Jiding Li
Although poly(vinyl alcohol) (PVA) membranes are widely used in solvent dehydration by pervaporation, the separation factor is rather limited. Considering this, novel PVA mixed matrix membranes with graphene oxide (GO) nanosheets were prepared. poly(acrylonitrile) ultrafiltration (PAN) membrane was used as support layer. The PVA/GO composite membranes were characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, thermogravimetric analysis and water contact angle. We also explored the pervaporation performance of the membrane for ethanol dehydration. GO slightly improves the thermal stability and crystallinity of the composite membranes. In addition, the hydrophilicity of the composite membranes is weakened after GO addition, but the crosslinking degree is increased, resulting a significant increase in the separation factor and a certain decrease in the total flux. With the amount of GO addition increases, the total flux of the PVA/GO composite membrane decreases, while the separation factor increases first and then decreases, and the preferred amount of GO addition is 2.0 wt%. Especially, the separation factor of the composite membranes with 2.0 wt% GO addition could reach 3 059, which is 16 times higher than PVA membranes, with the corresponding permeability flux is 145 g m−2 h−1.

20 March 2020 in ACS Omega
Verified
Journal Article
Open access
WCweibin Cai
weibin Cai
XCXue Cheng
Xue Cheng
XCXiaohan Chen
Xiaohan Chen
JLJiding Li
Jiding Li
JPJunqi Pei
Junqi Pei
In this paper, PVA/Ti3C2Tx mixed matrix membranes (MMMs) were prepared by mixing the synthesized Ti3C2Tx with the PVA matrix, and the pervaporation (PV) performance of the ethanol–water binary system was tested. The morphology, structural properties, and surface characteristics of the membranes were investigated by scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, degree of swelling, and water contact angle. The PVA/Ti3C2Tx MMMs exhibit excellent compatibility and swelling resistance. Moreover the effects of the Ti3C2Tx filling level, feed concentration, and operating temperature on the ethanol dehydration performance were systematically studied. The results demonstrated that the separation factor of PVA/Ti3C2Tx MMMs was significantly increased because of Ti3C2Tx promoting the cross-linking density of the membrane. Specifically, the membrane showed the best PV performance when Ti3C2Tx loading was 3.0 wt %, achieving a separation factor of 2585 and a suitable total flux of 0.074 kg/m2 h for separating 93 wt % ethanol solution at 37 °C.

25 March 2024 in Membranes
Verified
Journal Article
Open access
PDF file
XTXufeng Tian
Xufeng Tian
DYDongbei Yue
Dongbei Yue
THTao Hou
Tao Hou
FXFuyuan Xiao
Fuyuan Xiao
ZWZhiping Wang
Zhiping Wang
WCweibin Cai
weibin Cai
The high concentration of chloride ions in desulphurization wastewater is the primary limiting factor for its reusability. Monovalent anion selective electrodialysis (S-ED) enables the selective removal of chloride ions, thereby facilitating the reuse of desulfurization wastewater. In this study, different concentrations of NaCl and Na2SO4 were used to simulate different softened desulfurization wastewater. The effects of current density and NaCl and Na2SO4 concentration on ion flux, permselectivity (PSO42−Cl−) and specific energy consumption were studied. The results show that Selemion ASA membrane exhibits excellent permselectivity for Cl− and SO42−, with a significantly lower flux observed for SO42− compared to Cl−. Current density exerts a significant influence on ion flux; as the current density increases, the flux of SO42− also increases but at a lower rate than that of Cl−, resulting in an increase in permselectivity. When the current density reaches 25 mA/cm2, the permselectivity reaches a maximum of 50.4. The increase in NaCl concentration leads to a decrease in the SO42− flux; however, the permselectivity is reduced due to the elevated Cl−/SO42− ratio. The SO42− flux increases with the increase in Na2SO4 concentration, while the permselectivity increases with the decrease in Cl−/SO42− ratio.

4 June 2021 in ACS Omega
Verified
Journal Article
Open access
QLQian Liu
Qian Liu
XZXuan Zhang
Xuan Zhang
BJBinbin Jiang
Binbin Jiang
JLJingfeng Li
Jingfeng Li
TLTing Li
Ting Li
YZYuankun Zhang
Yuankun Zhang
Orthoclase (K-feldspar) is one of the natural inorganic materials, which shows remarkable potential toward removing heavy metal ions from aqueous solutions. Understanding the interactions of the orthoclase and metal ions is important in the treatment of saline wastewater. In this paper, molecular dynamics simulations were used to prove the adsorption of different ions onto orthoclase. The adsorption isotherms show that orthoclase has remarkable efficiency in the removal of cations at low ion concentrations. Aluminol groups are the preferential adsorption sites of cations due to higher negative charges. The adsorption types and adsorption sites are influenced by the valence, radius, and hydration stability of ions. Monovalent cations can be adsorbed in the cavities, whereas divalent cations cannot. The hydrated cation may form an outer-sphere complex or an inner-sphere complex in association with the loss of hydration water. Na+, K+, and Ca2+ ions mainly undergo inner-sphere adsorption and Mg2+ ions prefer outer-sphere adsorption. On the basis of simulation results, the mechanism of ion removal in the presence of orthoclase is demonstrated at a molecular level.

10 May 2022 in Separations
Verified
Journal Article
Open access
PDF file
WCweibin Cai
weibin Cai
MWMingqian Wang
Mingqian Wang
GYGary Q. Yang
Gary Q. Yang
ZZZhijun Zhang
Zhijun Zhang
YWyujun Wang
yujun Wang
JLJiding Li
Jiding Li
Volatile organic compounds (VOCs) are important sources of atmospheric pollutants on account of their high recycling value. The membrane of dense silicone rubber polydimethylsiloxane (PDMS) has wide-ranging prospects for the separation and recovery of VOCs. In this study, PDMS membrane body models were established in BIOVIA Materials Studio (MS) to simulate VOCs with C3/N2 gases, and to study the structure of PDMS membranes and the dissolution and diffusion process of gas in the membranes. The free volume fraction (FFV), cohesive energy density (CED), radial distribution function (RDF), diffusion coefficient and solubility coefficient of C3H8, C3H6 and N2 in PDMS membranes were calculated, and the permeability coefficients were calculated according to these values. At the same time, the effects of temperature and mixed gas on the dissolution and diffusion of C3/N2 in PDMS membranes were investigated. The results show that the mass transfer process of C3 in PDMS membranes is mainly controlled by the dissolution process, while that of N2 is mainly controlled by the diffusion process. In a C3/N2 mixed gas system, there is a synergistic relationship between gases in the diffusion process, while there is competitive adsorption in the dissolution process. With an increase in temperature, the diffusion coefficients of the three gases in PDMS gradually increase, the solubility coefficients gradually decrease, and the overall permeability selectivity coefficients of the gases gradually decrease. Therefore, low-temperature conditions are more conducive to the separation of C3/N2 in PDMS membranes. The simulation results of the permeability selectivity coefficients of pure C3 and N2 in PDMS are similar to the experimental results, and the relationship between the micro- and macro-transport properties of PDMS membranes can be better understood through molecular simulation.

2 December 2020 in Journal of Chemical & Engineering Data
Verified
Journal Article
Closed access
WCweibin Cai
weibin Cai
TLTiankun Liu
Tiankun Liu
HYHong Ye
Hong Ye
MCMeng Chen
Meng Chen
XCXue Cheng
Xue Cheng