A new two-element phase-locked loop (PLL)-coupled array for the implementation of millimeter-wave (mm-wave) and subterahertz (sub-THz) phased arrays is presented. This architecture avoids using lossy phase shifter to create the required phase shift between the adjacent elements in a phased-array system. The required phase shift is generated by utilizing a dual nested loop PLL. The two PLL loops work together to stabilize the frequency and create the required phase shift. Moreover, it can be scaled simply by adding more unit cells to the architecture. A 112-121-GHz two-element phased array is designed and fabricated in a standard 65-nm CMOS process. It consumes 147-mW power and provides a phase shift of 46.7° ranging from 58.53° to 105.2° at 117 GHz.
23 June 2023 in IEEE Journal of Solid-State Circuits
A new four-frequency-shift keying (4FSK) transceiver (TRX) at 145–185-GHz operation frequency is presented. The proposed non-coherent TRX is a fully integrated bit-in–bit-out communication system without the need for separate modulators/demodulators (modems). The transmitter (TX) core includes only one voltage-controlled oscillator (VCO), which can generate four different frequencies based on the two parallel streams of binary data at its input. The receiver (RX) with a frequency overlapping architecture demodulates the 4FSK signal and recovers the two parallel streams of binary data. Both the TX and the RX are designed and fabricated in a standard 65-nm CMOS process. The TX and RX consume 62-and 120-mW power, respectively. The highest achieved data rate is 17 Gb/s at an 18-cm link distance with 10.7-pJ/bit energy efficiency.
25 April 2023 in IEEE Journal of Solid-State Circuits
A 110-mW 39-GHz Doppler radar front end in 65-nm CMOS for displacement and vibration sensing is proposed. Conventional Doppler radar suffers from detection nulls, at which the receiver detection gain drops to zero. Quadrature demodulation for either carrier frequency or intermediate frequency (IF) is necessary to alleviate nulls but still induces nonlinear detection gain that needs to be compensated through digital signal processing (DSP). In this article, a Doppler radar topology is proposed to achieve ultrahigh displacement range accuracy and sensitivity and to eliminate detection nulls without using quadrature demodulation. An edge-driven phase demodulator (EDPD) processes the rectified square-wave intermediate signal and converts displacement/vibration to a true-dc/baseband signal with a constant gain. Coherent demodulation and signal generation through common-referenced subsampling phase-locked loops (SSPLLs) allow the radar to achieve 4- $\mu$ m static range accuracy and 39-nm vibrational (at 10 kHz) range sensitivity in measurement.