The diagnostics of X-ray beam properties has a critical importance at the European X-ray Free-Electron Laser facility. Besides existing diagnostic components, utilization of a diamond sensor was proposed to achieve radiation-hard, non-invasive beam position and pulse energy measurements for hard X-rays. In particular, with very hard X-rays, diamond-based sensors become a useful complement to gas-based devices which lose sensitivity due to significantly reduced gas cross-sections. The measurements presented in this work were performed with diamond sensors consisting of an electronic-grade single-crystal chemical-vapor-deposition diamond with position-sensitive resistive electrodes in a duo-lateral configuration. The results show that the diamond sensor delivers pulse-resolved X-ray beam position data at 2.25 MHz with an uncertainty of less than 1% of the beam size. To our knowledge this is the first demonstration of pulse-resolved position measurements at the MHz rate using a transmissive diamond sensor at a free-electron laser facility. It can therefore be a valuable tool for X-ray free-electron lasers, especially for high-repetition-rate machines, enabling applications such as beam-based alignment and intra-pulse-train position feedback.
Today, with the increasing human population, the need for transportation is also increasing. These increasing transportation needs bring along some problems such as traffic density and traffic accidents. It is known that many of these accidents are caused by incorrect overtaking on single-lane roads and highways. In this research study, a solution proposal for such wrongful overtaking situations is discussed. The most important of these situations is that the vehicle to be overtaken is obstructing the view. In this study, by establishing a WLAN-based communication system between vehicles, it is discussed to eliminate the related loss of vision by image transfer between each vehicles. Unlike existing systems, this image transfer process is equipped with an automatic trigger with artificial intelligence. When overtaking is required, it is determined by means of deep networks whether vision loss occurs or not. As a main essence of this work, If vision loss is detected, the image transfer process between vehicles starts automatically and informs the driver. As a result of the real-time tests, it has been observed that it works successfully within the processing time required for the system to process 20 fps image data at a distance of 100 meters.