Some aerodynamic results about the effect of moving train on the aerodynamics of train-bridge system in crosswinds are introduced using a computational fluid dynamics (CFD) method. In the simulation, a new overset mesh approach is applied to present the motion of trains, and the results are compared with that of the scaled wind tunnel experiment to validate the accuracy of the mesh and algorithm. Besides, the aerodynamic characteristics associated with the train and bridge are discussed for a range of resultant yaw angles. It is found that the resultant yaw angle is significantly important for the aerodynamic performances of trains, and the aerodynamic interaction on the nose of head-car can affect the flow features around train-bridge system to produce larger aerodynamic loads on the head-car. Furthermore, a new fitting formula for some resultant yaw angles is proposed to predict the aerodynamic forces on trains. Finally, the time-varying forces on the bridge are presented and a sudden change of aerodynamic loads is also observed due to the effect of moving train. The variation magnitude of forces depends on the train speed, and the mean value of forces is only determined by the natural wind velocity.
9 October 2014 in Science China Technological Sciences
A method for analysing the vehicle–bridge interaction system with enhanced objectivity is proposed in the paper, which considers the time-variant and random characteristics and allows finding the power spectral densities (PSDs) of the system responses directly from the PSD of track irregularity. The pseudo-excitation method is adopted in the proposed framework, where the vehicle is modelled as a rigid body and the bridge is modelled using the finite element method. The vertical and lateral wheel–rail pseudo-excitations are established assuming the wheel and rail have the same displacement and using the simplified Kalker creep theory, respectively. The power spectrum function of vehicle and bridge responses is calculated by history integral. Based on the dynamic responses from the deterministic and random analyses of the interaction system, and the probability density functions for three safety factors (derailment coefficient, wheel unloading rate, and lateral wheel axle force) are obtained, and the probabilities of the safety factors exceeding the given limits are calculated. The proposed method is validated by Monte Carlo simulations using a case study of a high-speed train running over a bridge with five simply supported spans and four piers.
1 March 2007 in International Journal of Structural Stability and Dynamics